The Brophy Camper Scissor Steps # SS02 does come with the mounting bracket to attach to your RV as well as the necessary hardware. I've added a link to a video review of these steps for you to take a look at. view full answer...
The TorkLift GlowStep Camper Scissor Steps # TLA7803-8000 have a horizontal bar above the top step that is the mounting bracket to connect the steps to an RV. I've linked the install details that show how it's installed.
There are also two vertical bars on the bottom step that re the including landing gear.
There's also an optional GlowGuide Handrail # TLA7621 that many people like to include with the GlowStep. view full answer...
The Brophy Aluminum Scissor Steps you referred to, part # AS04 includes a mounting bracket and hardware as shown in the product description photos, so you won't need anything else to install the steps.
Available options include a handrail, part # AHR4 and non skid strips, part # NSAS. view full answer...
You are correct the Kwikee Electric RV Step Complete Assembly is a 4 wire.
The included 4-way plug fits into the existing wiring harness on your RV. Most vehicles should have this wiring already set up. In the event that your RV is missing the wiring, a 4-way pigtail is included to help you hardwire the unit to your RV. view full answer...
The Replacement Step, Motor, and Control for Kwikee RV Electric Steps part # LC3747452 comes with the Replacement Control Unit for Kwikee Electric RV Steps part # LC379146. Therefore, you'd need to use the included control unit and not an existing. There is also the option of the Kwikee Electric RV Step Complete Assembly part # LC3747453 which is a complete unit that comes with step, motor, control unit, door magnet, and switch. view full answer...
I reached out to my contact at TorkLift International, and the pins you are referring to are 1/4 inch diameter and 2-1/2 inches long for the TorkLift Custom Frame-Mounted Camper Tie-Downs for a Toyota Tacoma. These frame mounts are vehicle specific and any step rails could cause interference. view full answer...
The TorkLift Custom Frame-Mounted Camper Tie-Downs such as the Front # TLC2219 and Rear # TLC3215 that fit a 2016 Chevy Silverado 3500 Crew Cab without board or step underneath truck bed do come in pairs. They come with 2 tie-down inserts, frame brackets, and installation hardware; I've added links to video reviews of both products for you to take a look at. view full answer...
Part # TLF2022 consists of 2 TorkLift front tie-down inserts, frame brackets, and the necessary mounting hardware. The rear kit only for the 2017 Ford F-350 is part # TLF3008. Both of these are a confirmed fit for the 2017 F-350 with 6-3/4 Foot Bed, without board or step underneath truck bed and with a factory installed hitch. These will not fit trucks with factory flip-out steps that are mounted under the bed. view full answer...
Lippert Kwikee 38 Series Electric Step # LC3723383 does come with the motor, control unit, pigtail, and switch kit included with the actual step assembly. Everything you would need for a step upgrade! I have linked the video as well. view full answer...
The TorkLift GlowStep Revolution Scissor Step # TLA8004 does include the hardware to install the mounting base on the frame of your Grand Design 5th wheel. The hardware is shown in the linked photo. The included video highlights the step's features and shows the installation. The specific RV shown has vertical step mounting studs so it also required Vertical Stud Adapter Bracket Item # TLA8022. view full answer...
For a Furrion AC kit that comes with everything needed to add AC to your cargo trailer/camper you'd want the part # FR55PV which comes with all of the wiring needed, the single zone controller, the thermostat, and the distribution vent that would mount on underside of your roof hole. view full answer...
For your 2024 Chevrolet Silverado 3500, you can use the TorkLift Custom Frame-Mounted Camper Tie-Downs # TLC3221.
There are currently no front tie downs available for your vehicle, however they are expected to be available at some point, just have not been confirmed yet. You are also going to need a set of turnbuckles # TLS9529 to secure your camper to the tie downs. view full answer...
Good news! I was able to go out to the warehouse and see that the # 8538-T does include both end caps as well as the replacement step.
I have linked the above product to this page for your convenience. view full answer...
I recommend using the MORryde StepAbove RV Steps for 21-3/4" to 22-1/4" Wide Doorways - 2 Steps # MR86RR, which I was able to confirm with my contact at MORryde will work on your door with 22-1/2" between the flanges. The bracket should have enough play to close the 1/4" gap according to them, but he mentioned if you've still got a little slack you can use something as a shim/spacer to reduce movement. This is a 2 step option that is ideal for entry heights between 25"-29". view full answer...
I confirmed with MORryde that the bolt that you need to fit into the floor-mounting hole of the MORryde RV Cargo Sliding Tray - 72" x 29" - 2 Way Slide - 80 Percent Extension # MR49FR is a 5/16" bolt. This bolt is included in the hardware kit that comes with the # MR49FR. view full answer...
The Solera 18' Solid Black RV Awning Roller and Fabric (Std) # LCV000211506 is not the complete assembly, just the roller and fabric.
We do not have any installation videos on your 2020 Merceds-Benz Sprinter, however, if you need a complete kit with everything needed for installation, we have # LCV000334961-362243, in black fade, or # LCV000334998-362241 in white fade. view full answer...
When you order the Lippert Outriggers # LC301704 from us you will get 2 brackets that are mirror images of each other so they won't be the exact same thing as it looks like you received from the place that you ordered yours from. Ours will fit on either side of your steps so you can get them installed on your RV. I have attached a photo of our kit that you can check out. view full answer...
The Global Link RV Entry Door Locking Latch Kit part # 295-000019 does come with installation hardware which consists of four screws. There will be two screws that hold the face of the latch to the rear and then two screws which secure the catch plate inside the door. view full answer...
Yes, you do have it right concerning the Solera 20' White Fade RV Awning Roller and Fabric # LCV000211523.
It comes with the roller, and is able to be used as a manual awning as you would then attach it to your rail and arms, such as the Solera Universal Awning Support Arms - White # LC434728 or Black # LC434727.
I have added a link below to a video review for you to check out as well if you'd like to take a look. view full answer...
For your 2021 Heartland Trail Runner Travel Trailer I recommend the Furrion Vision S Wireless RV Observation Camera System Item # FCE48TASL-05. This kit comes with the the rear camera, two side cameras, and a 7" LCD color monitor. All cameras have LED lights for visibility at night. The rear camera has a built-in microphone and the system has built in motion detection. The system is a wireless system and does not require a wire connection from cameras to the monitor. Each camera simply... view full answer...