The Thule Xsporter Pro Mid Overland Truck Bed Ladder Rack # TH34RR that you referenced comes with everything needed to install including the crossbars. view full answer...
I have a solution for you, but the # AMG100543 does not come with any hitch pin or clip, so they would need to be purchased separately. I recommend using the etrailer Hitch Receiver Lock # e98880 which is designed for 2" receivers and will work well to keep your hitch cover secure.
I've linked a brief review video of this lock that I recommend having a look at as well. view full answer...
All you need for attaching a brake controller to your 2022 Hyundai Palisade is the receiving-end setup.
For that setup, you need to have a 4-way and a 7-way wiring harness in order to use a brake controller. If you do not have the 4-way installed already, I recommend the Curt T-Connector Vehicle Wiring Harness # CU94FR. The T-Connector includes a powered converter to ensure that your vehicle's wiring matches that of your trailer. Once you install the 4-way (or if you already have one),... view full answer...
We do have what you need but the Firestone Coil-Rite Air Helper Springs # F4174 does not include the bracket to install on the hitch. You would need Replacement Inflation Valve Bracket for Firestone Air Command Compressor Systems # FWR17607560. Also Firestone Union Tee for 1/4" Tubing # F3025-1. view full answer...
The Loadstar ST185/80D13 Bias Trailer Tire with 13 Inch Galvanized Wheel - 5 on 4-1/2 - Load Range D, # AM3S334, does not come with a centercap.
We have the Trailer Wheel Center Cap, Chrome, # 319EZ, that will fit the wheel and it has a center plug that can be removed to access an EZ lube axle. I also have the Trailer Wheel Center Cap, Stainless, # LHCS102-SI60C, which is basically the same cap only in stainless steel.
Both of the caps will install by inserting the cap through the back... view full answer...
I spoke with my contact at Dexter, and the # DX66FR master cylinder does include the boot and push rod, but their design does not require the gasket. Please note that this master cylinder is a replacement part only for the Titan brand Model 10 and Model 20 actuators.
My contact also mentioned that the orifice size on this master cylinder has been changed to a 1/8 inch NPT (National Pipe Thread) in the past seven years, so if you have an older model actuator, the orifices would differ... view full answer...
The Fulton Plastic Fender with Top and Side Steps - Black - 13 inch Tires, item # F008583, is designed to be mounted to existing hardware or mounted with brackets designed to attach to the specific trailer frame on which they are being installed. No mounting hardware is included.
We do have some mounting hardware available (see link) that may work on your trailer. You will need to determine the mounting location and style of bracket that will work on your trailer. view full answer...
The Yates Keel Roller For Boat Trailers, # YR18244-165EC, does not come with the steel shaft, but we do carry a steel shaft that will fit this keel roller.
You will want to pick up the 19 inch long x 5/8 inch diameter roller shaft, # 107-30A. view full answer...
I contacted our representative at Westin, and he informed me that the item you selected, Westin Oval Tube Steps, part # 22-5000 are the correct tube steps for your vehicle.
He also said that you will need the Westin Custom Installation Mounting Kit for Oval Tube Steps, part # 22-1895 to install part # 22-5000 on your 2010 Dodge Ram 1500 SLT regular cab. view full answer...
Yes, I spoke with my contact at RoadMaster just to be sure and the LED Display Monitor for BrakeMaster Systems, replacement part # RM-300065-00, is included in the RoadMaster BrakeMaster Second RV Kit for Hydraulic Brakes, item # RM-98300, along with all of the parts needed for the RV. view full answer...
The inner hub plates/brake assemblies we sell are sold assembled as you see them in the pictures.
Yes, we do carry them in size 12-1/4 x 3-3/8 inch. Since I do not know what weight axles you have I can not give you a specific recommendation, but I have a link below to all the different electric brake assemblies in the 12-1/4 x 3-3/8 inch measurement.
Most likely you have a 9,000lb axle and will need the 23-434 (left) and 23-435 (right) 9,000 lb capacity, check your axle capacity to be... view full answer...
The Thule K-Summit - Size K23 Self-adjusting Snow Tire Chains, # TH02230K23, is two tire chains.
When using tire chains you will want to use on all four tires to get the maximum traction with your vehicle. If you only use two chains you will want to install them on the drive wheels of your vehicle. On a 4-wheel drive vehicle they would go on the back and for vehicles with all wheel drive (AWD) they normally would go on the front.
I am sending a link to the FAQ page on Thule Tire Chains... view full answer...
I confirmed with Thule that, unfortunately, the pads of # THKIT3131 cannot be purchased independently from the rest of the hardware. view full answer...
The Bargman LED Double Tail Light # 47-84-527 just comes with the double light which can be used for one side of your trailer, so you'll need 2 if you need to replace/upgrade the lights on both sides of your trailer.
Don't forget the license plate bracket like part # LPL55CB if you don't already have one! view full answer...
The front equalizer of the part # K71-656-00 is different because it does not attach to shackles on the one side. The higher side attaches directly to the leaf spring without a shackle.
Dexter determined that this provided the smoothest ride quality when set up like this.
I attached an install video for you to check out that covers all of the included components as well. view full answer...
The Optronics LED Side Marker or Clearance Light # MCL35AEBP that you referenced is sold individually. If you needed two of these you'd have to order a quantity of two. view full answer...
Yes, the Thule Top Tracks for Roof Racks part # THTP42 comes with hardware as well as drill bits, allen keys, and sealant which is everything you need to install the tracks expect for a drill. I have attached a photo that shows this. view full answer...
The Replacement Truxedo Shur-Bond Velcro Brand Fastener # TX1117876 comes with two strips of Velcro. This would work for both sides of the cover. The opposite side of the Velcro will be on the tonneau cove itself. view full answer...
The Thinline LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 11 Diodes - Clear Lens # STL69RCB is a single light. If you needed two of these lights you would have to order a quantity of two. view full answer...