Yes, the Pop & Lock Custom Tailgate Lock with Handle # PAL1700C that you referenced comes with the tailgate handle, 2 keys, lock mechanism and all necessary hardware for installation.
It is compatible with the following vehicles:
2004 - 2018 GMC Canyon
2004 - 2018 Chevrolet Colorado view full answer...
The box without the solar panel you are looking for is the TorkLift PowerArmor Locking Battery Box - 6V and 12V Batteries # TLA7708R; this is exactly the same as the TorkLift PowerArmor Solar Locking Battery Box # TLA7708RS with the only difference being it does not have the solar panel.
In regards to a gap, I cut out a part of the linked video review which shows there is a small gap on the top of the box (on the left), though you may be able to use the hole in the back, depending on how... view full answer...
The CIPA Towing Mirror # CM11980 is sold as a single mirror. If you'd like one for each side you'll need to purchase two of them.
For a set of mirrors I like the dual lens K-Source Towing Mirrors # KS3990.
I've attached videos of both products for you. view full answer...
The Redarc Tow-Pro Elite Trailer Brake Controller - 1 to 3 Axles - Proportional Item # RED44FR does come with a wiring harness however, on the 2018 Chevrolet Colorado it will have to be spliced in to the factory wiring. The wiring should be located behind the driver side kick panel, taped to a bundle of wires. view full answer...
I checked with Westin first to verify fit for your truck and the E-Series tube steps, # 23-3150 will fit a 2012 Chevy Colorado crew cab. The steps do come with the the correct vehicle specific mounting brackets to install them on your truck. view full answer...
The etrailer Trailer Hitch Receiver # e98909 does not include hardware as it reuses the factory hardware that holds in the bumper support bracket on your 2019 Chevrolet Colorado.
The 7-Pole and 4-Pole Trailer Connector Sockets w/ Mounting Bracket and Wiring # HM40975-11998 will be what you need to have the trailer wiring installed on your truck. This will fit in place of the cover on the left of your license plate already on your Colorado's rear bumper. It does provide connectors for... view full answer...
The Covercraft Carhartt SeatSaver Custom Seat Covers part # SSC1347CABN comes with two covers, one for the front driver seat and one for the front passenger seat. They are a confirmed fit for your 2012 Chevrolet Colorado. view full answer...
Yes, the Replacement Tarp for Extang BlackMax Soft Tonneau Cover # EX1940 comes with the snaps installed. If you just need replacement snaps we also have the # EX7028. The snap studs # EX2128 are also available. view full answer...
The CIPA Deluxe Door Mount Mirror # 11650 is a universal-fit door-mount towing mirror that is intended to fit a broad range of vehicles. It attaches at the bottom of the door and also in between the top of the door and the window and fits both driver- and passenger-side doors. Please note that if your Colorado doors have a plastic body molding (sometimes called cladding) at the bottom of the door then this mirror will not fit.
This CIPA mirror is sold as a single unit, not a set, so you... view full answer...
The Pollak 7- and 4-Pole Trailer Connector Socket with Mounting Bracket # HM40975 does not include the U.S. Car type connector that plugs into its rear since it is intended as a factory replacement part for a vehicle with the tow package.
A connector and 4-foot pigtail harness is offered as a separate item, part # PK11998.
For a typical RV set-up the following will be the wire color/function when using this harness:
Color - circuit - wire gauge:
Red - Left Turn and Stop - 14 gauge
White... view full answer...
Yes, a lock is included on the RetraxONE XR tonneau covers for your 2018 Chevy Colorado; the correct fit for your truck depends on if you have a 5 foot or 6 foot bed:
- 5 Foot Bed: RetraxONE XR Hard Tonneau Cover # RTT-60454
- 6 Foot Bed: RetraxONE XR Hard Tonneau Cover # RTT-60453
The RetraxONE has a locking handle near the end of the cover towards the tailgate, and is concealed with a weather-guard lid so it is safe from the elements. view full answer...
The emblem of the # AMG102422 is chrome plated metal and not plastic. I looked for the review you mentioned but couldn't find it.
You can also check out the review video I attached to see more info as well. view full answer...
What you see in the pictures of the Pop and Lock Locking Tailgate # PAL1700C is what comes with it. This product should work well on your 2011 Chevy Colorado.
Check out the picture I attached that shows the installation sheet that comes with this product. view full answer...
I have a solution for you, but I don't recommend using white lithium grease on your wheel bearings, since it's more of a general lubricant and there are much better products specifically designed for wheel bearings. Instead, I recommend using the LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge # L11390, which is designed specifically for wheel bearings and is the best. view full answer...
One of the photos on the product page for the Custom Installation Kit for Westin Molded, Sure-Grip, and Grate Step Running Boards # 27-1595 does have the disclaimer of "typical photo", which was likely used as a stock photo at some point. The 2nd photo on the page, is of what the actual brackets for this Westin installation kit will look like. view full answer...
What you described is actually the part # RM-8315 that is a component of the # RM-9060 and # RM-9060-900002. It is the air tank/air compressor assembly. view full answer...