The MagnaFlow Direct Fit Stainless Steel Catalytic Converter # MF23223 is a confirmed fit on your 1991 Cadillac DeVille with 4.9L V8 engine. This item consists of only the catalytic element and does not include any mounting clamps or other hardware, which you can source locally if you need to replace what is now on the vehicle.
This item is non-directional in terms of exhaust flow, but there is a top and bottom. The surface that shows the item part number should face down to allow for... view full answer...
The Draw-Tite # 36071 does not come with a ball mount but it does come with a hitch pin and clip to secure the drawbar to your trailer hitch.
For a hitch ball you can use part # 19256 for a 1-7/8" hitch ball or part # 19258 for a 2" hitch ball. Their individual prices can be found on their product pages. view full answer...
The Curt Trunnion Style Weight Distribution System part # C24UR does come with the pictured shank. The only thing it does not come with that you will need is a hitch ball, part # 19286 for 2-5/16". view full answer...
Yes, if you bought the part # Y00245 that will come with just the landing pad! If you have all the other Yakima components # Y00421 and # Y53TR you will be good to install! Check and see if you have I've included an install video for you! view full answer...
Yes, the etrailer Trailer Hitch Receiver # e62AR will include the 6 fish wires to install the six 7/16" carriage bolts and square hole spacers.
I recommend installing either the Tekonsha 4-Way Flat # 118720 or 7-Way # 118276 when you install the receiver on your 2022 Cadillac XT5. These will connect to the factory wiring and allow you to connect different trailers. The 4-way will work on most small trailers while the 7-way will be needed on larger trailers which use electric brakes. The... view full answer...
The Thule EasyFold XT # TH903202 has bike and hitch locks to help deter theft of both. The lock doubles as the anti-rattle device and is located on the shank of the rack as you can see in the attached photo as well as the review video. view full answer...
On the Pro Series weight distribution system # PS49901 the ball is already installed and torqued to spec so no worries! I have linked a video featuring this system for you. view full answer...
The Kats Heater # KH11811 is a cartridge style engine block heater that DOES include the AC power cord shown on the item's web page and in the attached photo. This 400-watt engine block heater can be used with a water/antifreeze blend (but not straight 100% antifreeze). Always be sure to unplug the heater and secure the cord before starting your engine. view full answer...
The Hopkins Backup Sensor System , part # HM60100VA, you have referenced is a mounting bracket with 2 sensors that give off an audible alarm when detecting an object when going in reverse. It does not have a camera. The mounting bracket can be painted, but you will not want to paint the sensors.
If you are wanting the backup sensor system with a camera and monitor you will need to use the Hopkins Rear View Camera with Backup Sensors, part # HM60195VA. This is the mounting bracket, sensors,... view full answer...
It never hurts to ask and be sure! You are correct that the Curt Class III Ball Mount with 2 Inch Ball # C45036 does come with the hitch ball already installed. The ball comes torqued on the ball mount to the factory specifications, so it is a step you will not need to do before heading out so soon.
I have attached a review video of this ball mount for you. view full answer...
The Curt hitch part # C12160 that you referenced is made from steel. Normally I would agree with your line of thinking about the galvanic corrosion but us and Curt have both found that it's not an issue on your vehicle so it's not something you'd have to worry about. view full answer...