The Bulldog Square Jack part # BD182500 has a removeable end cap on the top that you will remove and reinstall to service the jack, therefore it's not a sealed jack. The type of lubrication used is just a standard automotive grease per Bulldog. We cannot recommend using another type of grease to replace this.
I'd love to assist further we but we don't offer any products specifically designed for the aerospace market so I wouldn't have any additional advice for you here. view full answer...
The Dexter EOH actuator # K71-651 can absolutely be used with a pressure bleeder. The actuator has a standard brake bleeder nipple on the revivor which you can attach the hose of a power bleeder to for faster bleeding. We do not carry the YSTOOL brand, so I cannot say for sure if their kit will be compatible. We do have the hand pump bleeder # PTW87030 that will be compatible with the fitting on the Dexter EOH actuator. view full answer...
A VIN is not required, just the year, make and model of a vehicle. Sometimes certain configurations need to be stated such as Hybrid engine, 4WD or sport packages.
On some vehicles, spare tires need to be removed. The Draw-Tite hitch, part # 75153 does not require removal of the spare tire and yes it can still be accessed.
The trailer wiring harness for tow package 2004 Highlanders is part # 118248. The port for the tow package vehicles is located behind the driver side cargo access panel... view full answer...