The Timbren Axle-Less Trailer Suspension System w Electric Brake Hubs - Straight Spindle - 3,500 lbs # A35RS545E is a combination of parts. It is the Timbren # ASR3500S05 along with the Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 4-1/2 # 84546UC3-EZ and Dexter Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3,500 lbs # 23-26-27. view full answer...
The Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair) # BB1980A-SS does not have threads on the hub end of the bearing buddy, it is smooth. I have a video attached that will show an up close view of these products. view full answer...
I found the answer page you are referring to where I said:
The brown/green and brown/yellow wires on your trailer are for the same running light circuit. You would need to run them both to the brown wire of the 4-way.
This particular trailer wiring setup had the brown wire (running light circuit) split off in to two wires for both sides of the trailer and they were marked yellow/brown for the left side and green/brown for the right side.
Sounds like your trailer is wired more traditionally... view full answer...