What Parts Make Up the Timbren Axle-Less Suspension With Electric Brakes for 3,500 lb?
Question:
Hello, I am trying to determine the corresponding part number for the Timbren Axle-Less Trailer Suspension System w Electric Brake Hubs - Straight Spindle - 3,500 lbs. I contacted Timbren and the etrailer.com number A35RS545E does not match their inventory. Can you provide me with the Timbren part number for the axle-less suspension part?
asked by: Mark C
Expert Reply:
The Timbren Axle-Less Trailer Suspension System w Electric Brake Hubs - Straight Spindle - 3,500 lbs # A35RS545E is a combination of parts. It is the Timbren # ASR3500S05 along with the Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 4-1/2 # 84546UC3-EZ and Dexter Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3,500 lbs # 23-26-27.
Products Referenced in This Question
Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 4 Bolt Flange - 3,500 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension w Electric Brakes - Standard Duty - No Drop - 5 on 4-1/2 - 3.5K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Timbren Axle-Less Trailer Suspension - Standard Duty - 4" Lift - 4 Bolt Flange - 3,500 lbs
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: Most Popular Wheel Bearings
- Q&A: Recommended 5 Lug Timbren Axle-Less System for 13" Trailer Tires
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Replacement Axle for 1968 Shasta Camper
- Q&A: 4-Way and 7-Way Trailer Wiring Harness For a 2023 Mazda CX-50 With Curt Trailer Hitch Receiver
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Where to Position the Trailer Axle?
- Q&A: How to Upgrade Trailer with 45 MPH Speed Rating for Highway Speeds
- Q&A: Upgrading Tires on Ultra-Tow 5 x 8 Aluminum Utility Trailer With Higher Speed Rating
- Q&A: Comparing a 205/75D15 and 205/75R15 Trailer Tire
- Q&A: Recommended Suspension for 5x8 Northern Tool Trailer
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs