bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Forest River FR3 Motorhome


  • Which Repair Kit To Fix Roadmaster Falcon 2 Tow Bar Where Arms Are Hard To Slide In and Out
  • First things first I recommend first cleaning the arms on your Roadmaster Falcon 2 Tow Bar # RM-520. To do this you will want to soak the arms with degreaser and then move the arms in and out while rinsing them off with water. Next dry the arms thoroughly then lubricate with a dry silicone spray. You may also need Complete Repair Kit for Roadmaster Falcon 2 and BlackHawk Tow Bars # RM-910003-60 which includes the replacement components needed to freshen up your tow bar. While the tow...
    view full answer...

  • Troubleshooting Brake Lines Under Timbren Rear Suspension Enhancement On 2013 Ford F53 Motorhome
  • I reached out to my contact at Timbren and this is something that is not all that uncommon. If the brake lines on the axle of your 2013 F53 Chassis are underneath the Timbren Rear Suspension Enhancement # TFRF53A you can carefully bend them out of the way so they will not be underneath the spring when it contacts the axle. There is not a replacement clip set that will secure the lines in the new location so if the lines are pretty stiff and out of the way using no clips is fine, or you...
    view full answer...

  • Troubleshooting Atwood Heat Pump Not Working On a 2017 Forest River FR3 Motorhome
  • With your Atwood you could have one of a few issues. Do note the heat pump is not designed to work in temperatures 45 degrees Fahrenheit and below. So if you are in temperatures above this you will need to check the temperature sensor in the roof top unit to verify it is not damaged. The display/controller as well as the wiring for it may be damaged which would cause the main control unit inside the ceiling air distribution box to not know what the wall controller is set to. Your best option...
    view full answer...

  • Kwikee Steps on Forest River FR3 Motorhome Ratchet/Chatter Back and Forth
  • The issue you described is a common indication that the motor has gone bad as it is no longer arcing out which is what tells the motor to stop. The correct replacement motor which you will need to fix your issue is the Lippert Components Kwikee Motor and Screws for New IMGL Step part # LC379147.
    view full answer...