The Global Link RV Entry Door Locking Latch Kit with Keyed Alike Option - Black # 295-000019 can be installed on your cargo trailer door if you desire. It fits doors that are 1-1/4 to 1-1/2 inches thick. It will allow you to still use the cam-door style lock like # 305736 as long as the RV door handle is under the bar so it doesn't interfere with the bar system. view full answer...
We currently do not carry a Global Link RV Entry Door Locking Latch Kit with Keyed Alike Option part # 295-000019 or latch entry door lock that fits 1-3/4" door. If you already have the cut out for the latch then there is not an option that we carry for you.
If you do not have the cut out for a latch, we do have other options for locks available like the Valterra Deadbolt Lock for RVs - Single Cylinder - Stainless Steel part # L32CS3108 which fits 1-3/8" to 1-3/4" thick RV doors. This... view full answer...
The # L32CS3108 Fits 1-3/8" to 1-3/4" thick RV doors with 2-3/8" from center of face hole to leading edge of door so as long as your door meets those requirements you'll be able to install this on your RV door. view full answer...
Since your door key is purple it is very likely the lock is a global link RV lock however I would need to know the number from the key to get you the correct replacement. The only real option would be to replace the entry lock because it is not possible to just switch out the lock cores on the global link locks.
I recommend Global Link RV Entry Door Locking Latch Kit with Keyed Alike Option part # 295-000019 which is a very common RV entry door latch kit. It fits doors that are 1-1/4"... view full answer...
In order to determine whether or not the Global Link RV Entry Door Locking Latch Kit # 295-000019 will work on your 1970 Avion Classic you will need to measure the existing door and latch cutout. The Global Link RV Entry Door Locking Latch Kit is designed to fit in door latch cutouts between 2-1/2" wide x 3-1/2" tall to 3" wide x 4" tall and on doors that are between 1-1/4" and 1-1/2" thick. As long as your latch cutout is between these dimensions, this will be a fit for your door.
If... view full answer...
The Global Link RV Entry Door Locking Latch Kit with Keyed Alike Option # 295-000019 fits the standard RV doors like what your 2004 Holiday Vacation would have and comes with a handle, latch, and matching key so it would be perfect for you. view full answer...
The Global Link RV Baggage Door Slam Latch part # 295-000015 is a commonly installed OEM baggage door lock. If the existing locks look the same and the dimensions match (5" wide x 4-1/2" tall x 1-1/2" thick) then chances are they will be an exact match. Don't forget to select the keyed alike option if ordering multiple.
Unfortunately, there isn't any way to verify the correct baggage door lock for an RV using the make/model. view full answer...
The replacement strike plate for your Global Link RV Entry Door Locking Latch Kit part # 295-000019 is the strike plate part # GL94FR. view full answer...
The Global Link RV Entry Door Locking Latch Kit # 295-000021 can be installed on either side of the door so it will work for your application. Simply rotate the handle to the correct orientation and be sure that the flat side of the latch is pointing towards the outside. view full answer...
I do have a suggestion, as a simple way to keep your fridge door locked is by using the Everchill 12-Volt RV Fridge Door Latch # 324-000149. view full answer...
I spoke to my contact at Global Link about the Global Link RV Entry Door Locking Latch Kit part # 295-000021. They informed me that there are 90 different key codes for the entry door latches. Therefore, it is not impossible but also not very likely. The odds of someone else having a Global Link RV Entry Door Locking Latch Kit and trying their key with your lock makes things even that much more rare so you really shouldn't worry. view full answer...
On the Bauer Products European Style RV Entry Door Lock # BA38AR you would pull on the handle that says "open" (pictured below) to close the door from the inside of your trailer.
As for fitment, you'll need to remove your current entry door lock and measure the cutout hole to determine if this is a correct fit. This lock requires a cutout hole 2-3/4" tall x 3-3/4" wide. view full answer...
Yes, the Replacement Cam Lock Cylinder for RVs # 295-000077 could install on a 1/8 thick door as long as the catch for the latch was placed properly so that when the lock was "locked" it was turning and grabbing it and not allowing it to partially open. view full answer...
The space between the housing of the latch and the face of the handle is only 1/2" so the Bauer Products RV Baggage Door Slam Latch # BA57FR isn't going to be a good fit for your 7/8" thick door.
We do however carry the Global Link Locking Baggage Lock Actuator Set with Mounting Plate # GL34FR which can fit RV baggage doors measuring from 0.7" to 1.25" thick. view full answer...
I wasn't able to find the cutout dimensions for the Bargman L-100 but since we know the door thickness is 1-1/4" thick we just need to measure the width and height of the cutout hole to find a correct fit. The Global Link RV Entry Door Lock # 295-000019 you were looking at is designed to fit a 1-1/4" to 1-1/2" thick door with a 2-1/2" to 3" wide x 3-1/2" to 4" tall cutout hole.
If you could provide me with these dimensions I'd be happy to find the correct RV entry door lock for you. view full answer...
The Replacement Cam Lock Cylinder for RVs # 295-000003 that you referenced does come with the option to be keyed alike for an additional cost. All you will need to do is select "Keyed Alike" from the drop-down "Keyed Alike?" option and typing in how many you would like in the "Quantity" box before adding it to your cart.
They can be used for RV baggage doors, general storage compartments, and outdoor kitchen and storage doors. This will enable you to use the same key for all of the doors... view full answer...
While it's likely the Global Link RV Entry Door Locking Latch Kit # 295-000019 will fit, you'll have to do some measuring as we have no way of knowing what the door measurements are on a 2007 Jayco Jay Feather. You need to make sure your door is 1-1/4" to 1-1/2" thick and your latch cutout is between 2-1/2" wide x 3-1/2" tall and 3" wide x 4" tall. view full answer...
The Valterra Deadbolt Lock for RVs # L32CS3008 is designed to fit on doors that are 1-3/8" to 1-3/4", and have at least 2-3/8" from center of face hole to leading edge of door. I suppose as long as the long as the plates that you're trying to fit this on are no thicker than that and you have that much space to install the lock you could make this work. The only issue I can see is that it would bind the two doors together and you'll no longer have a functioning screen door that can be opened... view full answer...
The Global Link RV Entry Door Locking Latch Kit with Keyed Alike Option # 295-000019 will fit doors that are 1-1/4" to 1-1/2" thick, and will install into latches that are 2-1/2" wide, and 3-1/2" tall to 3" wide, and 4" tall.
If your door on your 2012 Keystone Avalanche 341TG matches those dimensions, then the Global Link RV Entry Door Locking Latch Kit with Keyed Alike Option # 295-000019 will work for you.
This lock is also able to be keyed alike to match other Global Link Locks, as well. view full answer...
The Global Link RV Entry Door Locking Latch Kit # 295-000019 may work to replace the lock on your 2008 Jayco Eagle but unfortunately there is no type of database which has the manufacturers and/or details of RV components such as door locks.
This Entry Door Locking Latch Kit # 295-000019 is designed to replace a Global Link, Bauer, Lippert Components, Fastec (FIC), or TriMark standard entry door latch and it is pretty safe to assume that your 2008 Jayco Eagle has one of those, unless it... view full answer...
Go To Results