Actually, the # 25-0575 step bars you referred to look very much like the ones in the photo you provided, and they are indeed a fit for a 1989 Toyota Pickup. You can see the installation details by clicking the provided link. view full answer...
For your 1989 Toyota Pickup the closest ladder rack we have to the Erickon # EM07707 that you referenced that's a confirmed fit is the Bully Adjustable Ladder rack part # CG-902. Due to the age of your truck there aren't as many options as the rack manufacturers haven't all tested that far back. view full answer...
We do indeed have bumpers that are a fit for your 1984 Toyota pickup, and there are options for one in Black or Chrome. The bumpers are from Westin and are called Diamondstep or Surestep, which is referring to the tread.
The Diamondstep has small diamond treads, while the Surestep has a textured step pad. The correct fit for your '84 Toyota are the following:
- Black: Westin Fey Surestep Rear Bumper with Custom Installation Kit # 61001-94400
- Black: Westin Fey Diamondstep Rear Bumper... view full answer...
For your 1991 Toyota Pickup the Duncan Towmatic II can be used if you use the Roadmaster XL Base Plate Kit # 1146-1 along with the RoadMaster Base Plates to Duncan Towmatic II, Karbar and EazAligner Tow Bars Adapter # RM-038. These removable drawbars, are held in place with a pin and clip, and make the baseplates virtually invisible when not towing the car.
I recommend using Loctite Threadlocker # LT37420 for your baseplate installation. I also recommend the RoadMaster 68" Single Hook,... view full answer...
There is not a confirmed fit hitch receiver for your 1982 2 WD Toyota Pickup. I recommend using the Curt Adjustable Trailer Hitch Receiver - 18"-51" Wide - 2" Drop - Class III - 2" # C13701 which will require drilling into your frame and possibly doing a little fabrication.
The hitch receivers you mentioned are not a fit for your truck. view full answer...
It is typically not a concern to tow a 7000 pound GVWR trailer as long as you never exceed the hitch's maximum rating of 5000 pounds or the maximum tow rating of the truck. At your specified weight of approximately 4800 pounds fully loaded, you would still be within the weight capacity for your trailer hitch. I have never heard of any laws that go by different specifications but I still recommend contacting the California State Highway Patrol. This would ensure that they don't have any... view full answer...
The 1976 Toyota Pickup with the 20R engine is a 2.2L engine. For your 1976 Toyota Pickup I recommend the MagnaFlow Stainless Steel Catalytic Converter - Direct-Fit, part # MF23889. It is a direct fit catalytic converter for your truck.
I have included a product description link. view full answer...
To add a light kit to the Westin Fey Surestep Rear Bumper # 61001-93500 on your 1989 Toyota Pickup you need the Replacement License Plate Light Kit for Westin Bumpers # 00007153, which works with all Surestep bumpers as well as a few specific models. view full answer...
For a 1994 Toyota pickup truck, excluding the T100, toolbox # DZ8546B is one of the recommended models. This tool box measures 46-1/2 inches across, 19 inches front to back, and 15-15/16 inches tall. view full answer...
You need the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers - Rear Axle. part # AL88113. It is a combination of an air lift spring and a jounce spring. It provides progressive support, the more weight you carry the stiffer the springs become. The air springs can be adjusted independently. Please keep in mind the Air Lift LoadLifter will not increase the maximum load weight of your vehicle. This item can also be paired with an air compressor so you can... view full answer...
The DeeZee Custom-Fit Truck Bed Mat # DZ86501 is confirmed to fit a 1989 Toyota Pickup with a 6' bed. This mat is made of extra-thick, high-strength Nyracord that will not crack, rust, or break, even in extreme temperatures and is resistant most chemical spills. view full answer...
The Curt Cargo Carrier, part # C18152, has inner dimensions of 60-1/6" long x 24-7/8" wide.
The etrailer Cargo Bag, part # 988501, measures 59" long x 24" wide, so it will definitely fit with this cargo carrier.
I've linked to video reviews of both of these. view full answer...
The Curt Trailer Hitch Receiver # 13086 is a fit for a 1993 Toyota Truck. This hitch is designed to fit on 1984 - 1995 Toyota Pickups, but if you have a different vehicle you are wanting to install a trailer hitch on just let me know and I can help you find the correct fit.
If you don't already have trailer wiring then we also have the matching Curt Wiring Harness # C55379 which tees in behind the tail lights on your pickup and gives you a way to operate the lights on your trailer.
You'll... view full answer...
As long as the van features a box, C-channel, or I-beam frame and its width is between 18 and 51 inches, the Curt Class III, part # C13701, can work.
However, looking at your picture, I honestly cannot say if this will work for you since I do not know what is under the panel of your 1991 Toyota Hiace Custom Van.
I recommend removing the panel and checking for one of the options above first to ensure that this is possible since the only references to hitches for your vehicle online are... view full answer...
The side brackets for the etrailer Hitch item # e96KR are not available to be purchased separately. This hitch is confirmed to fit a 1994 Toyota Pickup and includes all necessary hardware to complete the installation. This is a class III hitch with a 2" receiver. It has a 5,000 lbs towing capacity that can be increased to 6,000 lbs when used with a weight distribution system.
I have linked the installation instructions below. view full answer...
Yes, the Detail K2 Rampage II Snowplow part # K2RAMP8219 can be used on gravel. I spoke to my contact at Detail K2 and they informed me that the 2-3" lift on your 1989 Toyota Pickup will not be a problem while using this snow plow.
The plow has an adjustable electric winch that allows you to operate it from in the cab or with the wireless remote. The skid shoes let you adjust plow height to scrape over gravel and uneven surfaces.
In order to mount this plow to your vehicle, you will... view full answer...
I checked with my contact at Roadmaster, and the # 1123-1 base plate kit is only a fit for the 1987 Toyota pickup models with the leaf springs because these models have a narrower frame than the models without the leaf springs.
If your 1987 Toyota Pickup does not have leaf springs, you will definitely need to use the # 1146-1 kit. view full answer...
Although the wire colors can vary by vehicle or trailer manufacturers, there is one standard way to wire a 7-way blade style trailer connector. If you are looking at the front of the connector as it is installed on the rear of a vehicle, beginning with the top pin just right of center and continuing on clockwise, first pin carries 12 volts for any trailer accessories needing power, the next pin carries the right directional/brake light signal, the next pin would carry the output from the... view full answer...
For the matching pair of Cipa Replacement Mirrors you would want # CM17095 for the passenger side, as you noted, and # CM17195 for the driver side. These chrome mirrors are confirmed fits for your 1994 Toyota Pickup; I've added a link to a video review for you to take a look at as well. view full answer...
Yes, I checked with Bestop and the Bestop 2-Piece Soft Doors # B5177415 have been confirmed to fit your 1972 Toyota FJ40 with a hard top.
I attached a set of installation instructions to the right for you to check out as well. view full answer...
Go To Results