Expert Answers about Palomino
- Correct Bearings, Seals, and Brakes for a Lippert 8,000 Lb Axle
- The Lippert 8,000 Lb Axles use a part # 25580 inner bearing, a part # 02475 outer bearing, and a part # GS-2250DL grease seal. Then for the brakes, you'd need the Electric Trailer Brake Kit part # AKEBRK-8.
In regards to the leaf springs and shackle straps, you'd need to measure for these unfortunately but if you let me know the type and length of the leaf springs I'd be glad to see if we have an an option for you.
view full answer... - Possible Options For Fender For 2019 Solaire 268 BHSK
- We may have an option for fenders for your 2019 Solaire 268 BHSK, though there are no custom-fit replacements available for your trailer. Based on my research it looks like this is a tandem axle trailer with 15 inch wheels, and we do have fenders for that size trailer. What you will want to do is measure your current fenders and get replacements that match up to the size as much as possible, and use your existing hardware to bolt them on. They can also be painted to match whatever color...
view full answer... - How To Measure Your Travel Trailer For A Storage Lot Cover
- The length of the Adco Polypropylene Storage Lot RV Cover for Travel Trailer # 290-74847 would include the ladder sticking out off the rear of your trailer. RV covers come with extra slack for accessories like AC units and come with ropes and straps to tighten up the cover for a snug fit as well though.
Just like in the attached picture you'll want to measure from the end of the bumper to the nose of your trailer, not including the trailer tongue, and also from the undercarriage to the roof.
view full answer... - Replacement Roof Vent Lid For a 2002 Palomino Pinto
- It appears you possibly have a Ventline on your 2002 Palomino. If the base is not cracked or brittle and its not leaking you should be good with just replacing the cover. I recommend the vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents - White Item # Item # BV0554-01. I have hands on experience with replacing vents on a lot of different campers here and I would advise putting LaSalle Bristol XTRM Universal Self-Leveling Sealant - White - Qty 1 Item # 34427034145-1 around...
view full answer... - Fit of Pop & Lock PAL9772 on Fiberglass Tonneau Cover
- The Pop&Lock # PAL9772 will fit a hard fiberglass tonneau cover that meets the following parameters:
• Fits fiberglass tonneau covers on vehicles with power door locks
• Tonneau cover must have a 1-1/8" center hole for a rotary latch
• Tonneau cover must have a cable-latch assembly
If your Unercover Lux bed cover meets those stipulations, the # PAL9772 will work.
view full answer... - Can Blue Thread Locker Be Used On Propane Fittings
- Blue thread sealer can be used but you run the risk of it clogging the line if it spreads out from the threads to the tip of the fitting. It's safer to just use thread sealant tape like # 37207-30025 to avoid any clog issues. You would not want to use thread sealant on flared fittings since they'll have a gasket to prevent leaks.
view full answer... - Troubleshooting Installation Of A Swagman Traveler XC2 Bike Rack On A Trucks 2 Receiver
- The Swagman Traveler XC2 Bike Rack for 2 Bikes - 2" Hitches or RV Bumpers # S64663 is designed to work with the 2" receiver on your truck as well as the included RV bumper mount receiver so you should have no problems using the threaded hitch pin on your truck's receiver. It sounds like either the threads on the hitch pin are stripped or the hitch pin hole on your truck's receiver is too far back for the shank of the bike rack. If you could provide some pictures and additional details of...
view full answer... - Recommended Suspension Enhancement For A 2019 Palomino Puma 5th Wheel To Mitigate Chucking
- Since you've already upgraded your pin box to help deal with the chucking the next step would be to upgrade the suspension on the trailer to help combat the road shock you've been experiencing. For this I recommend the Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers - 5,200-lb to 7,000-lb Axle # RM-2460.
This system has heavy-duty shocks that reduce trailer bounce, chucking, and porpoising. It's a bolt-on installation so you don't have to worry about welding on any components....
view full answer... - Landing Gear For 2011 Palomino Sabre 31 RETS
- Look at your landing gear and find out the height of the outer tube, typically it's the black tube. That will let you know which jack you should go with. Then find the distance between the weld stops. This will let you know if the jack will fit or it you'll need to cut off and reweld on the brackets.
If the distance between weld stops is 15-1/2" then this set # RVLG-8000 would work for you.
view full answer... - Leaf Spring Recommendation for 6,000 lb Trailer Axles
- The heaviest leaf spring available that will fit your current measurement is going to be rated for 6,000 lbs, the 4-Leaf Double-Eye Spring for 6,000-lb Trailer Axles # e47SR.
This spring is 25-1/8" long from eye to eye; you need to take into account that your current springs have elongated some so you'll want to go with something shorter. A leaf spring should not be rated for more weight than the trailer's capacity because it will give you a much stiffer ride.
view full answer... - Does the Roadmaster Comfort Ride Shock Absorbers Increase Ride Height?
- The Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers item # RM-2460 is not designed to raise your 2019 Palomino Puma 32BHDB trailer but you may see a slight height increase because there won't be as much strain on the springs. If you are looking to raise the height on your trailer send me an email and I will be glad to help you out.
view full answer... - Furrion Observation and Backup Camera for Additional Camera View
- The Furrion System you referenced the FOS43TADS no longer has a camera option that is compatible or you could indeed sync a second camera. You will need to upgrade the system at this point to the VIsion S system # FOS43TASF you asked from and then you can add the Furrion Vision S Wireless RV Backup Camera w/ Night Vision - Rear Mount - Black - Qty 1 # FCN48TASF for that second camera.
view full answer... - Is Convert-A-Ball Cushioned Adapter Compatible With 2019 Ford F-250 Prep Package
- The Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter # CAB-C5GX1216 will work with your 2019 Ford F-250 as long as you don't have a ball with an integrated locking lever. If you do have a ball with the lever built into the top, you would need one like the # BWGNXA2061 instead which uses the handle to lock the ball. It is also worth noting that this should not be used with a sidewinder king pin or any cushioned or air ride king pin.
view full answer... - Spare Tire w/ Black Rim and 5 on 4-1/2 Bolt Pattern for a 2019 Palomino Solaire 251RBSS
- Yes, there is an option for a black rim like the one you were looking at. It is the Dexstar Steel Mini Mod Trailer Wheel item # AM20545. It is a 15" x 6" rim with a 5 on 4-1/2 lug pattern. This wheel is identical to the Karrier ST225/75R15 Radial Tire item # AM32545 except for the color. The tire in that combo is the Karrier ST225/75R15 Radial Tire item # AM10256. This is a radial tire with a maximum load capacity of 2,540 lbs at 65 psi. It has a speed rating of M which tops out at 81 mph.
view full answer... - Will the etrailer eDream RV Mattress 75" Long x 60" Wide Work in a Murphy Bed
- The etrailer eDream RV Mattress part # e94FR is pliable enough that it can be folded, so yes this would work great in a murphy bed setup.
view full answer... - Camco Ultraguard 5th Wheel Cover That Fits 2014 Palomino Sabre 5th Wheel 33-RETS
- According to all my research, a 2014 Palomino Sabre 33-RETS or 33-RETS-6 measures 35 feet, 1 inch. I recommend verifying within your owner's manual or the manufacturer what your exact length is just to be sure, but everything I found point to it being 35 feet, 1 inch, and for that the correct UltraGuard cover is the following:
- Camco UltraGuard 5th Wheel Cover - 36' Long # CAM45756
view full answer... - Replacement Bearings and Seals for Palomino Puma 253FBS 5th Wheel
- The Lippert 4,400 lb Trailer Axle uses the bearings and seals for a 3,500 lb axle so you'll simply need the Hub Bearing Kit part # BK2-100. The kit is for one hub so you will need to order four for two axles.
view full answer... - 225/75R15 Trailer Tire Recommendation to Fit With 5" Wide Wheel
- For your application I recommend picking up the Westlake ST225/75R15 Radial Trailer Tire - Load Range E # LHWL304 which is rated to fit a 5" wide wheel.
Tires only fit certain wheel widths so you want to make sure you choose one that is designed to fit your 5" wide wheels, and according to my research the Westlake is the only one that will fit your current wheels.
Attached is a review video for you to check out!
view full answer... - Replacing 21 Foot Wide Manual Dometic 8500 Awning With Power Awning
- You can definitely replace your 21 foot manual Dometic 8500 awning with a power awning, you will just need to get the right arms as well as the color of the awning you are interested in.
First, you will need the Solera 12V Power RV Awning Conversion Kit, and you can choose from either black or white in color:
- Black: Solera 12V Power RV Awning Conversion Kit # LC434723
- White: Solera 12V Power RV Awning Conversion Kit # LC434724
Since you already have the awning rail, you will just...
view full answer... - What Hitch Ball Shank Length Is Needed For The Draw-Tite Ball Mount For 3 Hitches, 4 Rise, 6 Drop
- For the Draw-Tite Ball Mount for 3" Hitches - 4" Rise, 6" Drop - 11-1/2" Long - 21K Item # 40701 you need a you need a 2-3/4" shank. I recommend the Draw-Tite 2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 20,000 lbs Item # 63840
view full answer...
Go To Results