The correct Adco RV Windshield Cover for your 1995 Chinook Motorhome on a Ford E-350 chassis is part # 290-2405, not part # 290-2411 which is for a motorhome on a Dodge Ram Van chassis. It does not have cutouts for the mirror but this is not needed as your mirrors are on the door and not the window. view full answer...
Assuming you have the standard bed, the correct bumper and installation kit for your 1997 Ford F-250 is the # 21002-92230. This fits the 1967-1997 F-250 standard bed models. view full answer...
The Buyers Products Hitch Plate with Receiver Tube - Ford # 3371809060A will indeed fit a 1996 Ford F-350 Cab and Chassis (as opposed to a Super Duty pickup). I am not sure what you are referring to in regards to mounting your tail lights though if you need a harness for your trailer lights you can use the simple T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118316.
I have added links to video reviews for you to check out. view full answer...
The Curt Trailer Hitch Receiver # C15300 is designed to fit the 37-1/4 inch frame width of a 1993 Ford F-250 or F-350 pickup with a standard bumper.
I have added a link below to a video install on a similar model year F-250, as well as a link to the directions for you to check out of the Curt Trailer Hitch Receiver # C15300. view full answer...
The only underbed rail kit we have for your 1993 Ford F-250 with the 8' bed is the Custom Underbed Installation Kit for B&W Companion 5th Wheel Trailer Hitches part # BWGNRK1100-5W for models without the overload leaf spring or part # BWGNRK1110-5W for models with the overload leaf spring. I have attached a photo of an overload leaf spring to help you determine whether or not you have this feature.
The above underbed rail kit comes with a B&W gooseneck hitch and will easily allow you to... view full answer...
With your 1995 Ford F-350 having the body lift I recommend using the Universal B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1500 which you will be able to have custom fabricated for your frame and set to your bed height. The Custom Fit # BWGNRK1110 sitting 1" below the bed is not ideal. While the High-Rise Ball # BWGNXA2050 will position the ball where it would need to sit the safety chain hooks are not long enough to reach through the raised bed height. The Universal hitch... view full answer...
The Reese Universal Install Kit, part # RP30035 is indeed compatible with your 1996 F350 Dually. The Pro Series # PS30093 hitch is compatible with the industry standard fifth wheel bed rails provided by the # RP30035 kit. The # PS30093 is a stationary hitch, which is recommended for long bed trucks, as it won't allow the necessary clearance between the nose of the fifth wheel and the rear of the truck bed to safely negotiate turns without crunching anything.
The Pro Series hitch is what... view full answer...
The # PS30132 Pro Series 5th Wheel Hitch w/ install rails you mentioned is compatible with your 1996 F350 long bed.
I have linked you to the installation instructions for the rail kit. The instructions that apply to your vehicle are on page # 11.
I have also linked you to an FAQ article about 5th wheel hitches. view full answer...
The wiring is great! To add a 7-way and a 4-way connector to your 1994 Ford F-250 or F-350 you will need two separate wiring harnesses. The first is the Curt T-Connector Vehicle Wiring Harness item # C55316 you were looking at. This custom fit wiring harness is a plug and play style of adapter. This custom-fit T-connector plugs into your Ford's wiring harness, which is located behind the rear bumper, along the driver's-side frame rail. You won't have to cut or splice into any wires. This... view full answer...
This product, item number VG-100, will fit your 1996 Ford F-250 and F-350. It does not have straps, but does have latches which are injection molded with stainless steel springs and pins. You can remove the tailgate from the vehicle one hand, and it does lay flat just like the OEM tailgate; however, this tailgate is not constructed like an OEM tailgate and has weight restrictions. This tailgate is not meant to be stood on. view full answer...
Yes, the Hopkins Smart Hitch backup camera # HM50002 will work with your 1995 Ford F-350 XLT dually. It plugs inline with your existing 7-way trailer connector. You can hardwire this camera if you prefer.
A license plate frame with camera and sensors mounts to your truck with the included hardware. The camera can switch between Hitch Mode and Everyday Mode very easily too.
My co-worker had this backup camera when he had a PT Cruiser and it worked great. I included a video of his car as... view full answer...
The Curt Wiring Adapter # C51322 is compatible with the Hayes Energize III+ Trailer Brake Controller # HA81742B. Both the Curt and Hayes Adapters # HA81783-HBC utilize the same connectors allowing you to use it on your 1996 Ford F-350. view full answer...
Though we do have an option for you, the wiring harness you mentioned will not work for your 1996 Ford F-250, even with the 7-way you have already on your truck. While I know it isn't the plug-in type of harness you were looking for, the only option that is available for your truck to add a 5th wheel/gooseneck in-bed wiring harness is the 7-Way Pre-Wired Car Connector # 20023.
This is a hard-wire connection but it does come with the splices and butt connectors needed for installation,... view full answer...
The Longview Custom Towing Mirrors # LVT-2100 that are a fit for your 1994 Ford F-250 should allow you to see past your truck's camper as they extend to give you another 4-3/16" of viewing surface. There are no photos of what the view is with the mirrors on, as that would depend on the viewing angle and size of trailer or camper. view full answer...
It may depend on how old your Tekonsha is, but if the plug matches the # 20127 you will be good to go. From what I could find, they have not changed the plug for quite some time so there should be no issue, but I do suggest double checking first. view full answer...
The Erickson Heavy-Duty Anchors # EM01003 are universal fit items and designed to fit most Chevy, GMC, Dodge, Ford and Toyota pickups. However, you will want to measure the stake pockets on your 1993 Ford F-350 Long Bed and compare with the measurements we have listed on the product page to see if they will fit your vehicle.
I am sending a video link to the installation of the anchors being installed on a 2005 Ford F-150. view full answer...
If you are changing from a 15 inch to a 16 inch tire and wheel you will add more height to the trailer. With the size tire you currently have on your trailer the diameter is approximately 28.87 inches tall. To go with a tire like part # AM35010 which is a 235/85R16 tire, the diameter is 31.728 inches or almost 3 inches more than the tires you currently have. You will want to make sure you have fender clearance on your trailer. You want at least 3 inches of clearance between the tire and... view full answer...
If your Ford F-250 Super Duty has a 2 inch by 2 inch trailer hitch receiver opening then the State of Texas Chrome Emblem Hitch Cover, # AMGSTTXC, will fit. All you will need is a hitch pin to secure it in place. I recommend a locking hitch pin like Trailer Hitch Receiver Lock, # e98880, to deter theft of the hitch cover.
Most F-250 pickups come with a 2 inch hitch, but some might have a 2-1/2 inch receiver opening. If you measure and find that you have a 2-1/2 inch opening, you can use... view full answer...
Go To Results