Expert Answers about Dutchmen

• Determining The Correct Replacement Landing Gear Follow Leg For A 2006 Dutchmen Victory Lane
• To find the correct replacement follow leg for your 2006 Dutchmen Victory Lane 5th Wheel I'll need to know the brand of the landing gear system. Without knowing the brand I won't be able to find a compatible replacement. That being said, with the age of your trailer the landing gear is probably discontinued and would require total replacement. If this is the case then you could use the Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010 you were looking at. This landing gear system...
  view full answer...


• Correct Replacement Hubs/Drums and Brakes for Dutchmen Four Winds 31B-DSL
• I have just what you need for a Dutchmen Four Winds 31B-DSL, the Trailer Hub and Drum Assembly part # 8-407-5UC3-EZ and Dexter Electric Trailer Brake Kit part # K23-462-463-00 are both correct, bolt-on replacements. The hubs are 6-lug and the brakes are 10".
  view full answer...


• Does Adco Olefin HD RV Cover Have Access Panels on Both Sides
• The Adco Olefin HD All-Climate + Wind RV Cover # AD67ZR has zippered panels on both sides of the rear of the trailer so for either side you'd have the access you are looking for.
  view full answer...


• Determining The Correct Wheel And Tire Size For A 2024 Dutchmen Coleman Lantern LT Travel Trailer
• The manufacturer unfortunately doesn't list the tire size used online so I'll need to see the code on the sidewall (pictured below) of your tire to determine the correct replacement. The Karrier # AM32182 you were looking at has a tire size of ST215/75R14. Since there are older models that have this same size it's likely going to be the same but it's definitely best to doublecheck before purchasing. If you have any preferences on wheel style/color let me know that as well.
  view full answer...


• Tankless Water Heater to Replace Standard Water Heater in Travel Trailer
• You can replace your busted standard water heater with a tankless water heater, and what you'll need to know is the amount of space you have in your cut out, as water heaters aren't specific fits for any make or model of trailer. The one I recommend checking out is from Fogatti: - Fogatti RV Tankless Water Heater # LSB64FR I like the Fogatti because it requires a smaller cut out of just 13" wide x 13" tall x 17-3/4" deep, but is still a powerful option, giving you up to 1-1/2 gallons...
  view full answer...


• Which Trailair Rota-Flex 5th Wheel Pin Box Fits a 2013 Dutchmen Voltage V3105
• Thank you very much for all the information. I was able to use this and determine that you have a Lippert 1621HD pin box. Therefore the correct replacement for your 2013 Dutchmen Voltage V3105 is the Trailair Rota-Flex 5th Wheel Pin Box part # LC328330. There will not be any issues using the Trailair Rota-Flex 5th Wheel Pin Box with your B&W Patriot 5th Wheel Trailer Hitch w/ Slider part # BWRVK3270.
  view full answer...


• Replacement Braking Assemblies for a 2014 Dutchmen Denali Trailer
• The best option for you is going to be to crawl under the trailer and read the tag on the center of the axle. This will tell you the weight capacity of your axle which will be needed to find the correct replacement braking assembly. I can see from the photo that you attached that your trailer uses a five bolt braking mounting flange therefore, it likely has either 6,000 lb or 7,000 lb axles. This would also make sense since you have a 3" diameter axle tube. The 4,400 lb axle capacity you...
  view full answer...


• Will Stromberg Carlson RV Exterior Ladder Fit a Toy Hauler
• The Stromberg Carlson RV Exterior Ladder w/ Hinges # LA-401 is a universal fit so it will work great on your 2017 Coleman 250TQ Toy Hauler as it can go on the side or rear of your trailer. This ladder measures 12" wide and is 99-1/2" tall but you can customize its height by trimming the legs with a tube cutter or hacksaw and you only need to be sure you know the locations of your Coleman's blocking or sub frame so you can properly mount it, as you can see by the cut out of the linked...
  view full answer...


• Replacement Trailer Brake Assemblies And Bearing Kit For 2010 Dutchmen Grand Junction 37TRL Camper
• The etrailer Electric Trailer Brake Kit # AKEBRK-6 contains the left and right brake assembly for 1 axle. These are your basic brakes that will require periodic adjustment on your 2010 Dutchmen Grand Junction 37TRL 5th wheel camper. You can upgrade to the Self- Adjusting etrailer Electric Trailer Brake Kit # AKEBRK-7-SA for better braking response without having to adjust the brakes after the initial installation. Again this contains one left and one right assembly for 1 axle. The Bearing...
  view full answer...


• Replacement Steps For 2003 Dutchmen Classic Travel Trailer With 29-1/4 Door Width
• When trying to replace steps you want to measure the width of the cut out where the steps store. If you measured that width and got 29.25" then that is much wider than normal. I recommend the SolidStep Manual Fold-Down Steps for 26" to 29-7/8" RV Door Frames part # LC791572 which fits door widths 26" - 29-7/8" and entry heights of 27" - 36". If you measure from the bottom of the doorway to the ground it needs to be between 27" - 36" for these steps to work. These steps will not attach...
  view full answer...


• Wind Sensor For Solera Smart Arm 12V Power RV Awning
• There is an option to add a wind sensor to the Solera Smart Arm 12V Power RV Awning - 16' Wide - Programmable - Black Fade # LC517486. All you need for this is the Wind Sensor for Solera Smart Arm 12V Power RV Awnings # LC715123. The only other thing you may need is two of the Awning Rail # LC715217, unless you already have the rail (which you will if this is a replacement and not adding a new awning). Also keep in mind the auto level you have won't control the awning, as its Smart Arm...
  view full answer...


• Ultra-Fab Deluxe Electric Landing Gear Set to Replace Jacks on 2018 Dutchmen 5th Wheel
• As long as your existing landing gear have their weld stops in the standard positions as shown in the linked photo (15-1/2 inside to inside and 17-1/2 outside to outside) and the outer tube length matches then the Ultra-Fab 12K dual motor landing gear set # UF17-943010 will install easily in its place in the existing hangers. But if not the Ultra-Fab includes new hangers that you can weld to your frame. This jack system's high 12K capacity and independent motor control will make leveling...
  view full answer...


• How To Find Correct Replacement Electric Landing Gear Legs for Dutchmen Victory Lane 5th Wheel
• In order to determine the correct replacement landing gear for a trailer you need the measure the existing legs. The measurement you're looking for is the length of the outer tube and the distance between the weld stops. I see you're looking at electric, if that's what you're after a great option is the Lippert Electric Landing Gear Set part # LC333964. This set uses the standard 15-1/2" weld stop spacing (inside to inside) and 29-1/2" long outer tube.
  view full answer...


• Lift Kit for a Triple Axle 2021 Dutchmen Voltage Toy Hauler
• There are a couple of options to lift your 2021 Dutchmen Voltage depending on if your axle's sit above or below the leaf springs. Either will have the capacity to support the weight of your trailer. Most likely your axles are already below your leaf springs, which means the only option is the Correct Track Trailer Alignment and Lift Kit item # RR55QX for triple axle trailers. This kit mounts to your spring hangers and moves the attachment point down 1-1/4" or 2-1/4". If your springs...
  view full answer...


• Will This Patriot Hitches Adjustable Drop Adapter Work With The Etrailer Motorcycle Carrier
• Yes, it would be safe to use the Patriot Hitches Adjustable Drop Hitch Receiver Adapter - 2" Hitches - 11" Rise/Drop - 7K, part # PH54FR, with the etrailer Motorcycle Carrier w/ Ramp for 2" Hitch - 76" Long - Steel - 500 lbs, part # e98873. You should not need to add an anti-rattle devices, it has a built in anti-rattle device. You also have an anti-rattle hitch bolt in your motorcycle carrier. This adapter will provide you will 11" of drop, but please keep in mind that anytime you add...
  view full answer...


• Replacing Ultra-Fab Landing Gear With Lippert Landing Gear With High-Powered Motor
• Thanks for all that good info, and what you have is the Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010, which you can replace with a Lippert set with a high speed motor on you RV, though you will need to have new brackets welded on. The issue is that the Ultra-Fab has an uncommon 20-1/4 inch space between the mounting brackets, while Lippert and most others have landing gear with the standard 17-1/2 inches. So if you were okay with having new brackets welded on to meet the spacing...
  view full answer...


• How To Determine Fit of the Lippert Thin Shade Complete Window Kit
• The Lippert Thin Shade Complete Window Kit part # LC806621 will fit any Lippert door so if this is what you have then you don't need to worry about measuring. However, if you don't have a Lippert door then your window cutout needs to be 15" wide x 24" tall in order for the shade kit to work. The window keys you need to remove the old window are included.
  view full answer...


• Recommended Lift Kit For 2013 Dutchmen Komfort 5th Wheel Trailer
• The locating pin in trailer leaf springs are roughly 1/2", and are a standard size between different brands of springs. To lift your trailer with leaf springs the best way is an over-under kit which moves your axle from above the leaf springs, to below which lifts the trailer by the diameter of the axle plus the height of the leaf spring stack. We offer a few kits depending on the diameter of your axle tube. If you have a 2-3/8" diameter axle you will need the Dexter Trailer Springs Over-Under...
  view full answer...


• Valterra Double RV Waste Valve for 2021 Dutchmen Coleman LT 17B Travel Trailer
• It sounds like you need a Valterra Double RV Waste Valve for your 2021 Dutchmen Coleman Lantern LT Travel Trailer. There are three different types of valves. 3" Hub/1-1/2" Spigot - # TR38 3" Spigot/1-1/2" Hub - # TR38A 3" Spigot/1-1/2" Spigot - # TR38B You should be able to tell which one you need by inspecting your current connection points. The one end with the lugs on it is the same on all 3 parts so you simply need to determine if you need hubs, spigots, or a combination of both....
  view full answer...


• Will Replacement New Style Linc Analog Remote Work on 2013 Denali Travel Trailer
• Yes the Replacement New-Style Linc Analog Remote # LC292614 that you referenced can control your slide out, stabilizer jacks front and back, and awning and porch light and was designed for 2013 year RVs with the Linc system.
  view full answer...