Expert Answers about Chrysler 200 fit

Expert Answers about Chrysler 200

How Many Bikes Can be Carried With Trailer Hitch on 2015 Chrysler 200
For your 2015 Chrysler 200, a maximum of two bikes is able to be carried with the trailer hitch that fits it, the Draw-Tite Sportframe Trailer Hitch Receiver # 24919. The reason is, this 1-1/4 inch hitch is a Class I hitch, and Class I hitches are only rated for carrying up to two bikes due to the amount of stress that would be put on the hitch and your Chrysler's frame with a 4-bike rack. So what you would need instead is a Class I compatible 2-bike rack such as the Swagman Trailhead...
view full answer...

How To Choose Correct Bearing Buddy for Tractor Supply Small Utility Trailer
The correct Bearing Buddy Bearing Protector like part # BB1980A will be the one that matches the inner diameter of the hub bore opening on the trailer hub. In order to obtain the correct Bearing Buddy Bearing Protector you''ll need a digital caliper and measure to the nearest thousandth of an inch. I have attached a list of our Bearing Buddy Bearing Protectors below. Unfortunately, I can't recommend using the wrong size Bearing Buddy in hopes it will fit. Therefore, my suggestion is to...
view full answer...

Does Thule Passage Trunk Bike Rack Fit 2016 Chrysler 200
The Thule Passage part # TH910XT has been confirmed as a fit for your 2016 Chrysler 200. If you check out the install video link I attached you can see this rack being installed on a similar 2015 200 as yours. If you plan on carrying any womens or alternative framed bikes without horizontal top tubes you may also be interested in purchasing a Kuat Bike Frame Adapter Bar # UB01 to provide a horizontal top tube on your bikes to provide an attachment point. I attached a review video for this...
view full answer...

Can Replacement Plate/Fin Cooler Core D15851 be Used on Older Derale Cooler with Welded Inlet/Outlet
According to my contact at Derale, their replacement plate and fin cooler core, part # D15851, will fit a range of their coolers including both passive and active (fan-powered) Atomic-Cool types. The coolers that can use this replacement core are all Class V models: D15850, D15950, D15450, D15405 and D15451. My Derale contact advised the only way to identify a replacement core for any cooler is with the original units part number. Unfortunately that will not appear on the cooler itself,...
view full answer...

How to Carry a 250 Pound Scooter with a 2015 Chrysler 200
Curt trailer hitch # C13056 is for a Dodge Durango and will not fit your 2015 Chrysler 200. The hitches available for the 200 are all Class I hitches rated for a maximum of 200 pounds tongue weight. The weight of your scooter exceeds the tongue weight capacity of the available hitches. What I recommend is to install a hitch, # C11403, and use it to tow a small trailer such as # K2MMT4X6 with the scooter on it. The tongue weight of this set up will be under 200 pounds and will be a much...
view full answer...

Husky WeatherBeater Floor Mats for a 2016 Chrysler 200s
For the 2016 Chrysler 200 you would need a different set of Husky Weatherbeater mats; # HL99071. They fit both convertible and sedan models regardless of trim level. The ones that you referenced # HL98091 only fit up to 2014 Chrysler 200 sedan and convertible models.
view full answer...

Threaded Locking Hitch Pin for Curt Cargo Carrier 18145
Thanks for the purchase and there is a threaded locking hitch pin that will work with your Curt Cargo Carrier for 1-1/4" and 2" Hitches # C18145. We have found that the Locking Anti-Rattle, Threaded Hitch Pin # S64029 is a fit for your cargo carrier and will work great to stabilize the carrier as well as help keep it secure from any miscreant with sticky fingers.
view full answer...

WeatherTech Floor Mats for 2012 Chrysler 200 and 300
Do you have a Chrysler 300 or a 200? The McNeil Weathertech # WT454031 front floor mats in Tan that you referenced are a fit for all models of the 2012 and 2013 Chrylser 200 and Dodge Avenger. For a Chrysler 300, you would need # WT454251 for all AWD models (including the Limited model) or # WT453791 for all RWD models. I have confirmed these fits with WeatherTech.
view full answer...

Trailer Hitch Recommendation for a 2012 Chrysler 200 Convertible
There is a confirmed fit for a 2012 Chrysler 200 convertible and it is Curt Hitch # C11133. The Draw-Tite hitch is not yet a confirmed fit. The Curt hitch comes with the correct ball mount, hitch pin, and clip. For a ball you can use # 19256 for 1-7/8 inch diameter or # 19258 for a 2 inch diameter. For trailer wiring, use the Vehicle Wiring Harness, # C56211. I have included a link to the installation instructions for the hitch and for the wiring harness for you.
view full answer...

Will the Curt T-Connector Wiring Harness # C56211 Fit a 2011 Chrysler 200 Hardtop Convertible
The Curt T-Connector Vehicle Wiring Harness, # C56211, will fit convertible and sedan models of the 2011 Chrysler 200 so it will fit your 2011 Chrysler 200 Hardtop Convertible. The sedan and convertible styles have the same factory taillight connectors behind the taillights which allows them to use the same wiring harness. The sedan pictured in the installation instructions is a standard photo. Even though this wiring harness fits multiple style of vehicles, the installation process is...
view full answer...

Is a Plug-In Wiring Harness Available for a 2014 Chrysler 200?
The part you are looking for is the Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector, # HM11142274. This is a confirmed fit for your 2014 Chrysler 200 and is compatible with a 7-pole adapter such as the Adapter 4 Pole to 7 Pole Vehicle End Trailer Connector, # HM11142274.
view full answer...

Recommended Bike Rack and Trailer Hitch Receiver 2012 Chrysler 200 Convertible
We have two trailer hitch receivers for your 2012 Chrysler 200 Convertible, the Draw-Tite Class I Sport Frame Receiver Hitch part # 24871 and the Curt Class I Receiver Hitch part # C11133. Both of these hitches are a Class 1 hitch receiver with a 1-1/4" receiver tube opening. I recommend the Draw-Tite hitch as your best option due to its sleek appearance after installed. As long as your current bike rack has a 1-1/4" receiver tube opening and is compatible with a Class 1 hitch receiver,...
view full answer...

Trailer Hitch and Wiring for a 2015 Chrysler 200s
I spoke with my contact at Draw-Tite and he said that as long as it is a 2015 Chrysler 200 4-door sedan then trailer hitch # 24919 fits all models including the 200s. If you will be using the hitch for light duty towing then the correct ball mount is # 3593. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. And for trailer wiring you can use # C56242. If you want to use the hitch for an accessory such as a bike rack or cargo carrier then you have to make sure the accessory...
view full answer...

Can A Trailer Hitch Be Installed On A 2011 Chrysler 200 To Haul A 120lb Scooter
The hitches available for a 2011 Chrysler 200 Convertible only have a 200lb tongue weight capacity so you that would leave you with 80lbs of capacity left for a cargo carrier to haul the scooter on. The trailer hitches that we currently offer only have a 1-1/4" receiver tube opening though so you'll likely have a hard time finding a cargo carrier with a ramp to get the scooter onto the carrier. That being said, you'll want the Curt Trailer Hitch Receiver # C11133 for the trailer hitch...
view full answer...

Compatibility of Curt Class I Hitch # C11133 with Dual Exhaust Model 2013 Chrysler 200 Limited
The installation instructions for the Curt Class I receiver # C11133 specifically mention the procedure for installing the hitch on dual exhaust-equipped vehicles, to the hitch is indeed compatible with your vehicle. The procedure specific to dual exhaust vehicles is mentioned in step one of the instructions, which you can see by clicking on the link provided.
view full answer...

Fit of Saris Bones Trunk Mounted 2 Bike Rack on 2013 Chrysler 200 Convertible
According to Saris, their # SA805BL Bones two bike trunk mounted bike carrier isn't compatible with the convertible model. Hollywood Racks offers several 2 bike models that will fit. I'd recommend their Express 3 bike model, part # HRE3. However, this will not fit if your 200 is equipped with the factory spoiler. If you do have a spoiler, I recommend the Malone Hanger Trunk Bike Rack for 3 Bikes - Adjustable Arms # MPG2139, you can use it with 1, 2, or 3 bikes. This rack is confirmed...
view full answer...

Trailer Hitch and Wiring Recommendations for a 2014 Chrysler 200 Limited
Yes, the Draw-Tite trailer hitch # 24871 will fit your 2014 Chrysler 200 Limited. It will fit all models including the convertible models. If you plan on doing some towing please first consult the owners manual to determine the towing capacity of the vehicle. For a ball mount use # 3594. And for a 1-7/8 inch ball use # 19256. For a 2 inch ball use # 19258. For trailer wiring you can use # C56211. I have linked the installation instructions for the hitch and wiring and a video showing...
view full answer...

Curt T-Connector for 2013 Chrysler 200 Limited 4dr Sedan W/V6 Engine and S Package
It looks like you're on to Mopar's little game! Chrysler is no different than any of the other car manufacturers in wanting you to purchase parts from them, rather than something available in the aftermarket that's much more reasonably priced. The recommended Curt trailer wiring harness for your vehicle is the # C56211 wiring harness. The C56134 harness you mentioned has been discontinued and is no longer available. The design of the C56211 actually draws the voltage to power the trailer...
view full answer...

Correct Size Rhino Rack Wind Fairing for a 2013 Chrysler 200
The best size wind fairing we offer for a 2013 Chrysler 200 with Rhino Rack Roof Rack would be the Rhino-Rack Fairing for Roof Racks part # RRRF2 which is 38" long. It should not interfere with any roof mounted accessories though you may need to adjust were they sit on the crossbars to ensure there won't be an issue with the two working alongside one another.
view full answer...