Yes, the T-One Vehicle Wiring Harness part # 118508 which is a fit for your 2015 Chevrolet Cruze will work with LED trailer lights. Generally speaking, most aftermarket trailer wiring harnesses like the above will work just fine with LED trailer lights. view full answer...
I do have an option that will allow you to carry a kayak on the roof of your 2017 Chevrolet Cruze 5-door, however, as the 5-door models of the Chevrolet Cruze have only been out for a limited amount of time, none of our manufacturers have designed a roof rack confirmed to fit your vehicle yet.
Therefore, in order to haul a kayak on the roof of your car, I recommend using the Malone Kayak Carrier with Tie-Downs part # MPG154 as this is the only option there is at this moment to my knowledge.... view full answer...
I do have a roof rack that will fit your 2015 Chevrolet Cruze, but your Malone roof rack will not fit your vehicle. My roof rack recommendation will consist of the following:
Yakima CoreBar Crossbars - Steel - Black - 50" Long - Qty 2, part # Y00421
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4, part # Y28TR
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2, part # Y06137
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2, part # Y06127
Yakima Same Key... view full answer...
The Curt Trailer Hitch Receiver # C11282 you purchased from us a few years back fits the 2011 - 2015 Chevy Cruse excluding the Diesel models, along with the 2012 - 2017 Buick Verano excluding the Turbo and Dual exhaust models.
Keep in mind that the mounting hardware included with the hitch is only designed to be used once, so you will also need the Replacement Hardware Kit # RHK.
Just select Curt from the manufacturer menu and then enter 11282 in the hitch item number field.
I included... view full answer...
The Swagman XC # S64650 can only be used with its thread hitch bolt. The weldnut inside prevents the use of a standard hitch pin. The benefit of the thread bolt is that it poles the shank tight to the inside of the receiver to reduce movement of the rack.If you where to somehow remove the weldnut and use a regular pin then you would also lose that anti-rattle ability. To make installing and removing the bolt easier I recommend using a ratchet with the appropriate socket.
For a locking... view full answer...
I'm happy to inform you that the Draw-Tite Sportframe, part # 24882, will fit on the 2015 Chevrolet Cruze LT.
The differences between the LT and LTZ do not affect the mounting places for hitches, so the installation will be the same. You can use the video of the LTZ, which I've linked to, to aid you in your installation on the LT. view full answer...
The Yakima Fullback 2 Trunk Bike Rack, part # Y02634, will fit your 2011 Chevy Cruze. It attaches to your vehicle using 4 straps, which is common for many trunk mount carriers. I am including a link to a video of the bike rack being installed on a vehicle. The video will show you how the straps are attached to your vehicles trunk.
My recommendation would be the Thule OutWay 2 Trunk Bike Rack, part # TH45JV. This is one of the easiest bike racks to put on and take off of a vehicle. It uses... view full answer...
The Draw-Tite Sportframe Trailer Hitch, part # 24882, will fit all models of 2011 Chevy Cruze, so it will work on your 2011 Chevy Cruze 2LT with RS package. I attached installation instructions for you to check out also.
If you plan on doing some towing you may also be interested in the following:
Tow Ready Custom Fit Vehicle Wiring, part # 118508 (instructions attached)
Hitch Ball with 2 inch Diameter and Short Shank, part # 19258
Hitch Ball with 1-7/8 inch Diameter and Short Shank,... view full answer...
Yes, you can use the larger 53" Thule WingBar Evo Crossbar part # TH711420 on a 2012 Chevrolet Cruze. In order to mount them you would still need the feet part # TH710501 and fit kit part # TH145183. The recommend size for this vehicle is 50" which is usually the smallest size that would work. If needed, you can almost always move up one size but that would be the limit. view full answer...
I have a solution for you, but the Titan Chain Snow Tire Chains # TC1118 that you are asking about are not a fit for 17" tires. If your 2013 Chevy Cruze has either of the two standard 17" tire sizes, 215/55-17 or 225/50-17, then you can go with the Konig Self-Tensioning, Low-Profile Snow Tire Chains # TH00023100. These chains are very easy to use and install compared to other style chains due to the integrated self-tensioning system. I attached a helpful demonstration video for you to check out. view full answer...
The blue tint of the K-Source Panoramic Aspheric Rearview Mirror # KSRM1300 wouldn't make seeing out of your rear window any more difficult than it currently is. It would be just as visible as what you currently have but with a wider viewing angle. view full answer...
The SportRack SkyLine cargo box # SR7018 will fit crossbars that are spaced 23-5/8, 25-7/8, 27-7/8, and 29-7/8 inches apart from the center of one bar to the center of the other bar. If the roof rack on your 2013 Chevy Cruze matches then the box will fit.
If you do not have a roof rack already then you can use the SportRack roof rack # SR1010. When installed the bars will be spaced 24 inches apart on center. But the bars are 1-1/4 inches wide meaning that you will be able to mount the... view full answer...
Yes, a lady's bike without a horizontal top tube would work great on the Surco 2 Bike Carrier part # SP501BR. The top tube is not used as an attachment point with this rack so it would not matter if it's a lady's bike or a men's bike.
Check out the review video I attached for this rack as well. view full answer...
The hitches that are confirmed to fit a 2016 Chevy Cruze LS and Limited are different part numbers. The profile and mounting location of the hitches for these two trim models are vary significantly.
We have the 2016 Chevy Cruze Limited listed separate fit guide listing, as if it is a different vehicle all together, not just a different trim model.
I have included a link to the hitches that are confirmed as a fit for each vehicle listing. There are two hitches for each vehicle listing.... view full answer...
I checked with Thule and the GateWay Pro part # TH88VR is a fit for your 2019 Chevy Cruze hatchback and uses the fit dial number of 8. Here's the full list of fit info:
101. Place top clips in the gap at the front edge of the top of the trunk, hatch or door.
102. Place lower clips in the bottom edge of trunk or hatch.
121. Caution: Rear wiper can not be used when carrier is mounted.
128. Lower arm of carrier should be positioned on upper tier of bumper.
FIT DIAL:8 view full answer...
There are two Curt T-Connector Vehicle Wiring Harnesses for a 2016 Chevrolet Cruze, part # C56319 or part # C56214 for limited models. The two are not interchanged and since you have a limited you will need the latter harness. The 2016 model year was a split year for the Chevrolet Cruze, the new body style is simply referred to as Chevrolet Cruze whereas the old body style is referred to as Chevrolet Cruze Limited. view full answer...
I did confirm with Yakima for you that the Yakima FullBack 2 Bike Rack # Y02634 will fit your 2017 Chevy Cruze, both the sedan and the hatchback models.
I took a look at your SixThreeZero Around The Block women's bike, and it will work with the FullBack but because it is a step-through type frame, you will ned the Yakima Tube Top Bike Adapter Bar # Y02531.
This bar will give your bike the horizontal mounting point to work with the FullBack (or any hanging-style bike rack). I have added... view full answer...
The Thule Gateway is a confirmed fit for the 2019 Chevy Cruze Sedan. The Gateway 2 Bike # TH88VR is a fit but the Gateway 3 bike # TH78VR is not a confirmed fit.
The Thule Passive Security Strap for Trunk Mounted Bike Carriers # TH533 and a cable lock like # e98891 are great additions if you want to add locks. view full answer...
I checked with SportRack and the semi-custom roof rack # SR1010 is a fit for your 2014 Chevy Cruze Eco. No additional parts are needed for installation.
This is a semi-custom roof rack so it will not be as good of a fit as a custom roof rack. For the most economical custom fit roof rack that will fit your Cruze you can use Rhino-Rack 2500 series rack with aero bars using the following parts:
Vortex Crossbars # RRVA126B-2
Feet # RRRLKVA
Custom clamps # DK142 view full answer...
The Draw-Tite # 24943 is not a fit for the hatchback models. The hitch you will want is the Draw-Tite Sportframe Trailer Hitch Receiver - Class I # 24951 which is compatible with the hatchback version of Chevy Cruze. I've attached a photo to assist. If you will be using this hitch for a bike rack or other accessory, there is nothing further you need. I've linked the page to the most popular bike racks and cargo carriers to help.
If you will be using the hitch for light towing, I also... view full answer...
Go To Results