It depends on where the Boss Snow Plow is attached to the frame on your 2015 Ford F-350 super duty. Most snow plows and front mount hitches like part # 65049 have identical mounting locations so they are not compatible at the same time. However, I have attached a snip from the installation instructions for your reference. If you look at the attached video if your snow plow shares mounting locations of the hitch, they will not fit together on the truck. I do not know of anyone that has done... view full answer...
The Curt Front Mount Receiver, part # 31408 has a 3500 lb towing capacity, a 350 lb tongue weight capacity and can handle 9000 lb line pull when used with a winch. The receiver has plenty of capacity for handling the SnowSBear Plow.
I will include a link to the Receiver installation instructions as well as a product description video for the SnowSport Plow. You can find these links below. view full answer...
Yes, so long as your snow plow and mount weigh a combined 300 lbs or less, the Draw-Tite front hitch that fits your 2006 Jeep Wrangler will indeed be able to support it. The correct part number for the hitch that fits your Jeep is the following:
- Draw-Tite Front Mount Trailer Hitch Receiver # 65048 view full answer...
The usable pin length of the Replacement Clevis Pin for Fisher Snow Plow part # 3371302320 is approximately 3" which you can see from the attached photo below. view full answer...
Yes, you can so long as your 2024 Chevy Silverado 1500 has a front hitch like the Curt item # C22NR. The SnowBear Plow for 2" Hitches item # SB324-080 mounts inside a 2" front hitch receiver.
The SnowBear item # SB324-080 is a 82" x 19" steel blade plow that has 9" of height adjustment. It uses an in-cab switch and also comes with a wireless remote control. view full answer...
The SnowBear Proshovel Snowplow for 2" Hitches - Electric Actuator - 88" Wide x 26" Tall item # SB324-140 needs to be mounted 9"-10" above the ground. There is an extension kit if your Ford F-250 is lifted or sits to high. It is the Drop Extension Kit for SnowBear Snowplows - Bolt On - 3" Drop item # SB324-128. This bolt-on kit ensures that the plow makes proper contact with the ground. Its sturdy steel construction is just as strong and durable as the plow itself. view full answer...
For your 9 foot Western snow plow the Replacement A-Frame # 3371316215 that you referenced is the correct replacement. Since you have a 9 foot plow you have the Pro series which is what this A-frame is designed to fit. view full answer...
The SnowBear Retrofit Kit # SB324-120 that you referenced does indeed have a distance of right at 31 inches from the center of one pin to the center of the other. Based on the spacing of your SnowBear cups this appears to be a perfect match. This will let you attach your plow to a 2" hitch receiver at the front of your truck. view full answer...
I went ahead and confirmed with my contact at SAM that the size of the actual shoe that touches the ground of the Replacement Plow Shoe Assembly for Meyer M-9 or M-10 Snow Plow # 3371303010 is 5-1/5 inches long x 5 inches wide. We (as well as my contact at SAM) unfortunately cannot confirm the exact measurements of the Meyer shoe part 09592, but the # 3371303010 will work as a direct heavy-duty replacement of the original Meyer shoe. view full answer...
The Replacement Eye Bolt for Meyer, Diamond, and Western Snow Plows part # 3371302005 has 5/8"-11 threads with an overall length of 6". If you can provide the type of snowplow you have I may be able to confirm fit that way but this is unfortunately as much detail as I can provide on these type of replacement parts. view full answer...
The only 7-1/2' back drag we have is the Replacement Back Drag # 3371311211 which is for Western/SnowEx/Blizzard Snow Plows. You can try using this back drag if you'd like but you'll need to determine fitment on your end. I'm attaching dimensional photos for the mounting holes as well as a review video for you to check out. view full answer...
The distance between the two dowels on the SnowBear 5Xm5 Universal Cross Member # SB324-060 is approximately 32-3/4 inches. The diameter of the dowels themselves is 1-5/8 inches and they are just about 4 inches in height.
This cross member is designed for SnowBear Plows and will install between the 2-point vehicle specific mounting brackets and the snow plow itself. view full answer...
The Replacement Double Torsion Spring for Diamond Snow Plow - 4-3/4" Wide x 8-1/2" Long # 3371302160 has a coil diameter of 2-5/8" and the coil wire itself is about 1/2" in diameter. view full answer...
I would be happy to! To add a front hitch to your 2023 Ford F-150, I recommend the Curt item # C31083. This front mount hitch is custom fit and will work with your F-150 but does require removal of the auto deploying air dam if you have it.
The Curt Hitch item # C31083 will work great with a hitch mounted snow plow. It has a 2" receiver that boasts a 500 lbs vertical load limit.
I have linked the installation instructions below so you can see how to get this hitch set up. view full answer...
The width between the springs is 1-1/2 inches for the Replacement Double Torsion Spring for Diamond Snow Plow - 4-3/4" Wide x 8-1/2" Long # 3371302160.
There is no weight specification for this spring at a 90 degree deflection. view full answer...
The 5XM5 Universal Cross Member for SnowBear Snowplows part # SB324-060 measures around 33" long x 2-3/4" wide. The distance between the two dowel pins is 30-1/8". Please note, the 5XM5 Universal Cross Member for SnowBear Snowplows is only to be used with SnowBear Snow Plows. view full answer...
I contacted the manufacturer and I was able to get ahold of some specs for the Western snow plow trip spring # 3371302205. See below:
Spring Rate = 175-195 LBS/IN
Number of Coils = 27.75 - 28.25
Largest Coil 2.38" diameter, tapered to 1.88" on both ends (3 coils each end)
Initial Tension = 340 LBS 10%
Finish : Black Paint
5 Inches Max Operating Extension view full answer...
Since we don't know what you have you'd need to take a couple measurements to determine if the # 3371303220 would work as a replacement. If the shoe you have has a shaft diameter of 1 inch and a length of 8-1/4 inches then this would work. view full answer...
I'm glad to hear the kind words!
The Coil SumoSprings Custom Helper Springs for Coil Spring Suspension # CSS-1069 will increase the coil spring capacity by 15% to 30% when installed. Since it is a part that works on multiple vehicle's there isn't a clear cut way to determine the exact weight or lift increase on your 2008 Ford F-250/F-350.
Since you are planning on using the truck to carry a snow plow, another option would be the Timbren Front Suspension Enhancement # TFF350SDC if your... view full answer...