M7 didn't have that dimension available but they said that the top edge of the # 327-60-160200 receiver tube sits about a 1/2 inch below the rear license plate. This would place the underside of the receiver tube about 3 inches below the rear license plate, so you could measure the distance from the bottom of the license plate to the ground, and subtract 3 inches from that distance to arrive at an approximate above ground height. view full answer...
The overall length of the module that comes with the Air Force One # SM99243 is 10-1/2 inches from handle to handle but the actual box part is 8-1/2 inches. It is 5-3/8 inches wide and 1-1/4 inches tall. Check out the picture I attached to see all of the dimensions. view full answer...
Please see the following for your requested measurements on the Non-Mortise RV Cabinet Hinges, # 37270635.
The width of the hinge opened is 2-3/8" and the width of the hinge closed is 1-3/8". and just in case, mounting hole distances are, the two furthest mounting hole from the top of the hinge to the bottom hinge measures 2-1/2" center on center while the holes on the middle hinge are 7/8 of an inch center on center. view full answer...
I have a couple of options for you but I checked with Hopkins and there are no custom wiring kits for the 2015 Mini Cooper. Instead you will want to use the Tekonsha Upgraded Heavy Duty ModuLite Circuit Protected Vehicle Wiring Harness item # 119190KIT. This harness will provide you with a 4-flat connector and will need to be spliced into your Mini's tail light wiring.
If you are not interested in splicing into your Mini's wires then I recommend the ZCI Circuit Protected Vehicle Wiring... view full answer...
Curt's Trailer Hitch Receiver # C11272 for the 2012 - 2013 Mini Cooper Hardtop with single exhaust is a light-duty Class I hitch that really should not be used with any sort of hitch adapter.
The reason is that on any hitch on any vehicle hitch extensions like # HTAD, # HT5R and # HES6 move the actual load far enough away from the hitch tube to increase the leverage and stress on it. These adapters also tend to allow for more random motion of whatever is mounted in them and this again... view full answer...
The correct base plate kit for your 2009 Mini Cooper hardtop base model is the Roadmaster Crossbar-Style Base Plate Kit item # 521878-1. This will connect right to the crossbar on your Falcon 2 Tow Bar item # RM-520.
Here are a couple of other parts you will need to flat tow your 2009 Mini Cooper:
Wiring Harness - Roadmaster Tail Light Wiring Kit with Bulbs item # RM-155
Supplemental Braking System - Blue Ox Patriot Radio Frequency item # BLU37TR view full answer...
The Curt Dual Hitch Extender for 2" Trailer Hitches # D-192 would be a great option, but unfortunately using any kind of extension piece like this causes it to cut the overall weight ratings of your trailer hitch in half. This means that your 1998 Winnebago Adventurer will only be able to handle 2,500 lbs towing and 175 lbs tongue.
Instead of using an extension piece, I recommend going with the Gen-Y # 325-GH-314. This has a bit of a different design and gives you multiple hitch receiver... view full answer...
For your 2005 Mini Cooper convertible only a light-duty 1-1/4-inch Class I hitch is offered, the Curt model # C11126, which fits the non-S-Series convertible version.
But if the trailer you want to tow has a 2-inch coupler, this just means that it requires a 2-inch hitch ball like # A-82 which will work in ball mount # C45521. This is the recommend ball mount for the Curt Class I hitch. You do not need any sort of adapter to use a 2-inch hitch ball on your Mini.
In cases when a hitch... view full answer...
The tongue weight capacity of the EcoHitch Class I hitch, part # 306-X7290 is 150 lbs. I've confirmed this with my EcoHitch representative.
At one time, the tongue weight capacity was listed as 100 lbs, but EcoHitch recently did additional testing and determined that the tongue weight capacity was 150 lbs.
If you click the provided link, you can see an installation video featuring the # 306-X7290 hitch.
If you're needing a bike rack but don't already have one, check out our selection... view full answer...
I went out into our warehouse to grab the measurement you are looking for on the Curt Trailer Hitch part # C11417. The distance between the holes from right to left is 37-1/2 inches. view full answer...
Go To Results