The weight capacity of the HideOut 2 Bike Storage Stand and Transport Kit for Lets Go Aero BossHog Hitch-Mounted Cargo Carrier # H01564 is 80 lbs total. That means basically each side of the carrier is 40 lbs for either side. view full answer...
The Steadyrack Bike Storage Wall Rack # B-SCSR02-004 can handle mountain bikes and road bikes up to a 77-lb weight. This includes the vast majority of adult and kids' road and mountain bikes. About the only bikes that won't work are the heavier e-bikes and some recumbent bikes.
The rack's weight capacity does depend in part on the mounting surface where you install it. If installing this on the wall of your garage you will want to use a stud finder to locate a 2 x 4 wall stud. Sheet rock... view full answer...
The Steadyrack Bike Storage Rack # B-SRFT-001 actually has a weight capacity of 77 lbs which is sufficient for the vast majority of e-bikes on the market now - only a select few will be heavier than that.
Attached is a review video for you to check out! view full answer...
While the Curt Wall Mount for 2" Hitch Accessories # C97DR is rated for 350 lbs, I don't see loading bikes on the bike rack for storage as a great idea since the bikes will be sitting further out and placing more stress on the wall mount - my contact at Curt agreed with me on this when I reached out to him.
For your application I recommend using the Curt Wall Mount # C97DR for your bike rack and then the Feedback Sports Velo Hinge Bike Storage Rack # 301-16724 for any bikes. The Velo Hinge... view full answer...
I spoke to my contact at Yakima and he informed me that the length of the Yakima Ridgeback 2 bike carrier part # Y02457 that you referenced is 42 inches when in the storage position.
I attached a review video for this rack for you to check out also. view full answer...
I went out to the warehouse and assembled a SportRack 2 Bike Stacker Bike Storage rack, # SR0012, and then measured it. It is 81-1/4 inches tall, 31-1/2 inches wide at the base, 14 inches wide outside to outside of the main support legs, and 22-1/2 inches deep at the base. One installation tip I can offer is that in the instructions, it says to put the feet on last. It would be easier to put them on in step 1. view full answer...
The capacity for Swagman X Mount Bike Carrier Storage # S80940 is 100 pounds and the surface that it mounts to needs to be rated for more than 100 pounds in order for you to be able to put 100 pounds on the rack. The steel is about 1/8 inch thick. view full answer...
The Swagman X Mount Bike Carrier Storage Rack # S80940 will hold the weight of the bike carrier with bikes mounted as long as the combined weight does not exceed 100 lbs and the mounting surface capacity is over 100 lbs.
The Kuat NV 2.0 4-bike rack # NV22G-NA22G, which you referenced, weighs 82 lbs total. As long as you do not have any additional accessories or components that push the weight being placed on the # S80940 over the 100 pound capacity of the rack or the capacity of the mounting... view full answer...
I wanted to make sure you got all the dimensions you need, so I pulled the part in our warehouse and measured it for you.
The dimensions of the Swagman X Mount Bike Carrier Storage Rack # S80940 are 12 inches wide by 10-1/2 inches tall and 7-5/8 inches deep. I've attached a photo to assist. view full answer...
Yes, the Swagman X Mount Bike Carrier Storage Rack # S80940 will work with your Thule T2 Pro XTR Bike Rack part # TH69TX.
The hitch pin of this rack will be 5 inches from the wall it is installed onto. What that means is the pin hole of your T2 will be sitting 5 inches from the wall. view full answer...
The Lippert Components Flip Down Slotted Bike Rack Tailgate Storage System # LC243621 that you referenced weighs 73 lbs. So you'd have about half of your weight capacity left over for the bumper of your Heartland Model M33 Mallard. view full answer...
I believe you're asking about the clearance between the rack and the vehicle, is that correct? If so, when the rack is folded down so it can carry bikes, the closest portion of the rack is 10-1/2 inches rearward of the hitch pin hole. When the rack is folded up into its storage position, the closest portion of the rack is 7 inches rearward of the hitch pin hole.
When folded down into the bike carrying position, the rack would extend 33 inches rearward of the hitch pin hole. When folded... view full answer...
The Figo Hanger, part # GU12001 is 15 inches long, and only 1/2 inch of that length is the cover for the ratcheting steel bar, so it will provide enough room for you to safely store your bike. view full answer...
You have two different options for your 2017 Porsche Macan. Both are Yakima but they are just as good as Thule in my opinion. There is a Hangout 3 # Y02638 and Hangout 2 # Y02637. The Hangout 3 is 23-1/2 inches long 20 inches wide and 10 inches tall when in the storage position. It should fit in the right size duffel bag! view full answer...
I called my contact at Hollywood Racks, and he confirmed that the dimensions of the Hollywood Racks Trail Rider Bike Rack # HR200Z when off the hitch and folded are 9 inches wide x 39 inches tall from the bottom of the shank to the top. I went ahead and created a diagram and attached it to to the bottom of this response. view full answer...
When folded up into the storage position, the distance from the hitch pin hole to the closest portion of the Swagman Chinook # S64683 is 6 inches. view full answer...
The Swagman X Mount wall-mount bike carrier storage rack # S80940 has a 100-lb weight capacity which is plenty for the weights of your Kuat NV # NV22G and Sherpa # SH22G hitch bike carriers. The thing to keep in mind is that the interior garage wall surface you mount these to needs to be strong enough for the load you'll put on it.
Your best bet is to use a wall stud finder to locate the wall studs in the garage and to install the X Mounts on those structural points. An alternative (or... view full answer...
The fittings of the RhinoFLEX RV Sewer Hose with Swivel Fittings, 4-in-1 Adapter, and Storage Caps # CAM39761 will not fit in your bumper that is 3-3/4 inches (the bayonet fitting on this is the standard 4-3/16 inches), but the fittings are actually not designed to fit in storage areas, they are meant to be stored separately.
The RhinoFLEX comes with storage caps, which is what are meant to be used with the hose when it is stored in your bumper. The hose itself is 3 inches in diameter... view full answer...
The Swagman XTC-2 2-Bike Platform Rack part # S64670 weighs right around 33 lbs. This will actually be one of the lightest platform style bike racks we offer. It has a 3" raised shank which will help with ground clearance and it can be folded into itself for easy storage. If you would like to lock the bike rack to the vehicle then you can do so using part # S64029.
If you would like to lock this bike rack to the vehicle then you can do so using part # ACC3250. view full answer...
The Curt Hitch # C11421 that fits your 2016 Scion iA is a Class I hitch with a 1-1/4" receiver, which means you need a bike rack with a 1-1/4" shank that is compatible with a Class I hitch. Please note that you are also limited to carrying two bikes with a Class I hitch.
I highly recommend checking out the Hollywood Racks Trail Rider # HR200Z, which uses padded hooks to grasp your bikes by the top tubes and adjustable wheel mounts with straps to secure your rear wheels. It has a mast which... view full answer...