I went out to our warehouse and measured the Replacement L-Pin for Equal-i-zer 4,000-lb Weight Distribution Systems # 90-03-9460. The length of the long side is 2-1/2" long, the short side measured at 1-1/2" long and the thickness of the pin is 1/2". view full answer...
The Lend-a-Hand Extra Large Folding Grab Handle for RVs # AM-533 measures 23 3/4" from the top mounting bracket to the bottom mounting bracket and the holes are spaced 1 1/8" on center.
I have included a diagram showing these measurements for you to check out as well. view full answer...
I checked with Blue Ox and I can confirm that the Blue Ox Base Plate Kit item # BLU93FR does fit your 2017 GMC Canyon Denali. You will want to follow the instructions in your Canyon's owners manual to address any procedures the adaptive cruise control may cause.
Some other parts you will need to flat tow your 2017 GMC Canyon are listed below:
Tow Bar and Safety Chains - Blue Ox Alpha 2 Non-Binding Tow Bar - 2" Hitch item # BX7380
Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil... view full answer...
The Universal Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers # RED69FR is 20" long from the end of the connector to the end of the wiring.
This is the harness that is included with the Redarc Tow-Pro Liberty Brake Controller # RED52VR and the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR. view full answer...
The Fulton A-Frame Coupler, 2-5/16" Ball, Wedge Latch, Gray Finish - 14,000 lbs # F44314R0303 is 13-1/4" at the widest point. the overall dimensions are 11" long x 13-1/4" wide x 3-1/2" high. view full answer...
I've provided a photo with the outside dimensions of the Viking Solutions Tilt-n-Go Hauler # 310-VTG002 for you. From the tip of the handle to the far opposite edge lengthwise, the cart/trailer is 63-1/2 inches in length. At its widest point at the wheels, the cart/trailer is 22-1/4 inches wide. view full answer...
The best hitch for your 2021 GMC Canyon is going to be the etrailer Hitch item # e98909. This hitch is custom fit and bolts to your Canyon with included hardware. This is a class III hitch with a 2" receiver. It will definitely get the 7,000 lbs towing capacity out of your truck as it is rated for 8,000 lbs.
For a wiring harness, I recommend the Hopkins Multi-Tow 7-Way Blade and 4-Way Flat Trailer Connector item # HM11141144. This harness has both a 4-way and 7-way connector.
I have linked... view full answer...
The drop for Roadmaster High-Low Hitch Adapter # RM-048-10 is actually 10-1/4 inches. It measures 11-1/4 inches horizontally from pin hole center to pin hole center. From the main hitch pin hole center to the angled gusset is 4-1/2 inches. I have included a picture showing the measurements I took. view full answer...
It is possible the Americana Baby Moon Trailer Wheel Center Cap # AM90086 will work with a Bearing Buddy but it will really depend on how far out it sticks once you have the Bearing Buddy installed.
The Baby Moon Trailer Wheel Center Cap # AM90086 has approximately 2-1/2 inches of clearance at its center point so you would have to have Bearing Buddies that do not extend out any further than that.
I have added a link to a video review of the center cap as well as a link to our selection... view full answer...
If you check out the picture I attached of the MaxxHaul Truck Bed Ladder Rack MT70386 installed you can see that this rack sits very tall on the back of the truck. The overall height is 45 inches.
For a lower height ladder rack that is also cost-effective the Erickson Truck Bed Ladder Rack # EM07706 has been confirmed as a fit for your 2006 GMC Canyon with a 5 foot bed and only sits 33-1/2 inches tall. view full answer...
Once assembled, the CE Smith # CE48870 Multi-Sport Plus Boat and Kayak Trailer weighs right at 200 lbs. The trailer ships in 4 boxes via UPS. view full answer...
I have a measurement for you that will help you to determine exactly where the bottom of the Curt Front Mount Trailer Hitch Receiver # C31074 is going to sit on your 2019 GMC Canyon as we have not installed on inside our facility to take this measurement. In the instructions which are linked below you can measure from the center of the mounting holes used in step 6 and 7 to the ground. Subtract 4" from this and that will give you the height from the ground to the bottom of the receiver... view full answer...
Yes, you can. Both the Curt T-Connector item # C55774 and the Mighty Cord Replacement 7-Way item # A10-7072VP use the USCAR 7-way socket. These are what every vehicle that comes from the factory with a 7-way connector has.
Since your 2023 GMC Canyon came from the factory with a 7-way connector, you can use the Curt item # C55774 to replace your broken one. This will provide you with both a 7-way and a 4-way.
I have linked an installation video below. view full answer...
I checked directly with the manufacturer for you, and as you can see by the accompanying photo, the height is 5 inches for the SumoSprings Solo Custom Helper Springs # SS85FR. view full answer...
The distance, center-to-center of the bolts on the mounting bracket of the Ultra-Fab Ultra Scissor Jacks # UF48-979002 is 2". I have included a picture showing this as well. view full answer...
Great question!
The 4,800 lb weight rating of the Demco Kar Kaddy SS # DM9713045 means that it can tow vehicles that weigh up to 4,800 lbs. Anything over that will be too much for the tow dolly and would require a trailer to tow.
The good news is that your 2023 GMC Acadia only has a curb weight of 3,300 lbs - 4,200 lbs depending on the model. Curb weight is the weight of the vehicle as if you were driving it off the dealership lot so even if you fill up to a full tank a gas you won't... view full answer...
For your 2018 GMC Canyon crew cab with a bare roof I can suggest the Rhino-Rack black Vortex Aero roof rack system made of parts # RRVA126B-2, # RRRLKVA and # DK330. This sleek aero style rack will be quieter than all other roof bar shapes and offers a 165-lb weight rating. It is shown in the linked video. view full answer...
Yes, it does. The Thule TracRac SR Sliding Truck Bed Ladder Rack item # TH43002XT-783 includes the rails that mount to the top of your 2021 GMC Canyon's bed sides. This system is designed specifically to fit the Canyon's with a 6' bed length.
I have attached a picture below that will show you what all comes with item # TH43002XT-783. I have also linked the instructions to help you get this ladder rack set up. Please feel free to email me directly if you have any additional questions. view full answer...
You can definitely use the Thule Xsporter Pro Adjustable Height Truck Bed Ladder Rack # TH500XT to transport and use your rooftop tent on your 2019 GMC Canyon. I reached out to my contact at Thule who confirmed that your estimated 500 lbs of weight will be safe to use with the Xsporter Pro.
The 450 lb weight capacity is for when you are in motion and is called the dynamic weight capacity. Since you will be sitting still while the rooftop tent is in use the ladder rack can handle a little... view full answer...
The Curt Replacement Anti-Rattle Hitch Pin # C82NR has the same 1/2"-13 thread pitch you are needing. We also have a Locking Hitch Pin # SR0901 with the same thread pitch if you want to be able to secure the bike rack. view full answer...