I was able to go out to the warehouse and measure the diameter of the hole on the # WM9003-4 for the hubcap that these will snap into and got 1.327 or about 1-1/8 inches. I also measured the nut impression size and got 1.037 or about 1-1/32 inches. view full answer...
I went and grabbed a Americana Baby Moon Trailer Wheel Center Cap # AM90086 from our warehouse to measure the depth and I found that the lip of the cover is right at 1/2 inch deep and the overall depth of the entire cover is 2-3/4 inches. view full answer...
You are correct the Replacement 22 mm Lug Nut item # WM9062 is what you would need if your wheel studs measure 21.85 mm. The correct cover would be the Replacement Wheel Master Lug Nut Cover for Wheel Liner item # WMRMT9061. This lug cover measures 1-5/8" tall. I recommend measuring one of the covers that hasn't fallen off. If you come up with a different size please feel free to email me back directly and I will be happy to look for other options. view full answer...
The part # PX1307SS is our most likely solution for a baby moon cover for your Little Guy Silver shadow tear trailer as it fits 13 inch through 15 inch conventional wheels. You can measure what you have now to see if it would fit though as this is 10-1/2 inches in overall diameter. view full answer...
We do offer Baby Moon Hubcaps from Americana. Part # AM90086 is intended for use on 13 - 15-inch conventional 5-lug wheels.
I pulled a sample of this part from our warehouse in order to take precise measurements for you.
The diameter of the rear inside surfaces of these hub caps is shown in the linked photo.
Part # AM90086 measures 9-1/4-inches. view full answer...
We do not have anything specifically listed for a 2023 Ford Maverick. I have listed the Baby Moon size options that we have available along with the sizes that they fit. You would need to compare what they fit to the wheels that you have on your 2023 Ford Maverick to determine if one of them will work for your truck.
Phoenix USA Baby Moon Hubcap - 8-7/8" # PXQ1401B
4-spline
Fits: 19-1/2", 22-1/2", and 24-1/2" conventional wheels
Bolt pattern: 8 on 275mm or 10 on 285mm
Hub bore diameter:... view full answer...
We have the Dexstar Conventional Steel Wheel, # AM20758, in stock so I went out to the warehouse to get an exact measurement for you. The outside diameter of the inner ring of this wheel is 11-1/2 inches including the nibs. view full answer...
I went out into our warehouse to get the dimensions of the Dexstar Conventional Wheel part # Am20758 that you requested.
From the opposite end of a nub to the other side of the round portion of the rim that sticks out this wheel measures 11-9/16 inches. Now if it had two nubs mounted directly across from each other it would be 11-3/4 inches. view full answer...
Sounds like you are either asking for the pilot diameter (the diameter of the hole in the middle of the wheel), which is 3.65 inches, or you are asking about the bolt pattern of the wheel which is 6 on 5-1/2 inch.
The backspacing is 3-1/2 inches and there are no hub caps available for this wheel.
The closest thing to a white version of this wheel would be the part # AM20741, but it has a larger pilot diameter at 4.27 inches. view full answer...
Thanks for the picture and the dimensions. Based on what you have given me we have a couple of options for lug nut covers. The first is the Wheel Masters Lug Nut Covers - Stainless Steel - Ford - 1-1/16" - Qty 8
Item # WM8011 you referenced. This lug nut cover is 1 9/16" tall. This is for Ford wheels.
The second option is the Wheel Masters Lug Nut Covers - Stainless Steel - 1-1/2" - Qty 6 item # WM8012. I have attached a diagram with the dimensions of this lug nut cover. I recommend you... view full answer...
The dimensions of the base of the Demco Hijacker Autoslide 5th Wheel Trailer Hitch # DM8550034 are approximately 35 inches long x 31 inches wide. It has a height that can be set at 15-1/4 inches, 16-1/2 inches or 18 inches.
The recommended cover for the head of the Demco Hijacker Autoslide 5th Wheel Trailer Hitch # DM8550034 is the aptly named Cover for Demco Hijacker 5th Wheel Trailer Hitch # DM14844; we do not currently carry a cover that fits over the entire hitch, including the base.... view full answer...
I went out to our warehouse and measured the Namsco Wheel Covers part # NA7160B0 for you. The distance from the center circle to the outer edge of the cap not including the metal tabs is 3". The covers are designed to fit a 16" diameter wheel. I have attached a photo to assist. view full answer...
The wheel covers like the part # CAM45333 that you referenced do have a soft fabric lining that will help protect the wheels from any surface scratching.
Check out the review video I attached for more info as well. view full answer...
The baby moon cover is designed to fit 13, 14, and 15 inch conventional wheels with 5 lug patterns.
If your 13 inch wheel was designed to fit a baby moon cover that is 9-1/4 inches across the part # AM90086 would work well for you regardless of your wheel bolt pattern. view full answer...
This Fifth Wheel Hitch Cover will fit any Reese, Draw-Tite or Hidden Hitch Classic style fifth wheels like part # RP30047. I also tested it on some of the newer fifth wheels and it will also fit the Signature Series style. Un-stretched and laid flat, it measures 28 inches by 18 inches. view full answer...
The Wheel Masters Lug Nut Covers # WM8010 referenced in your question are designed for 1 inch lug nuts. The overall length on the cover is approximately 1-1/4 inches, from the base to the very tip. The total diameter of the bottom opening is just over 1-1/4 inches (1.28 inches to be exact).
I cannot be sure that these will fit the cap on your Dodge Dakota, as they are designed specifically for GMC and Chevy trucks, but these are the only lug nut covers we currently have available that... view full answer...
The overall weight of the Adco Tyvek All-Climate + Wind RV Cover for 5th Wheel Toy Hauler # 290-34857 is 45 lbs.
I attached a review video for this cover that shows how it typically installs as well. view full answer...
Yes, the Phoenix USA QuickTrim Hub Cover # QT655C that you referenced will work for you as the wheel you have part # AM20539 requires 1/2 inch wheel studs like what this cover is designed to fit. view full answer...
I went out to the warehouse to measure the Wheel Masters Lug Nut Covers # WM8012. They measure 1-3/4 inches tall.
These are the only 1-1/2 inch lug nut covers that we offer. view full answer...