Expert Answers about Chrysler 200
- Available Hitch Adapter to Allow Use of 2-Inch Bike Rack in 1-1/4-Inch Class I Hitch
- Use of any hitch adapter such as the Brophy # HTAD will cause you to lose half of your hitch's rated capacity due to the change in the geometry of the whole system. Because an adapter pushes the actual weight load further away from the hitch, it will put more leverage on it. This means a 200-lb-rated Class I hitch suddenly has only a 100-lb capacity.
I suggest you use a support strap like # 18050 to help stabilize the loaded rack.
The best option is to use a Class I bike rack that needs...
view full answer... - Recommended Hitch for a 2015 Chrysler 200
- To add a hitch to your 2015 Chrysler 200, I recommend the Curt item # C11403. This hitch is custom fit and bolts to your Chrysler with included hardware. This is a class I hitch with a 1-1/4" receiver. It has a 2,000 lbs towing capacity and a 200 lbs maximum tongue weight.
If you are planning on towing you will also need a wiring harness item # C56242 and the Draw-Tite Drawbar item # 3593 and then for hitch balls item # 19258 for a 2 inch ball or item # 19256 for a 1-7/8 inch ball.
view full answer... - Thule K-Summit Tire Chain Max Speed Rating
- The recommended top speed on the Thule K-Summit Snow Tire Chains, part # TH02230K44 is 30 miles per hour (50 km/h).
view full answer... - Measurements on the Curt Trailer Hitch Class II Receiver
- I contacted the manufacturer that assembles the Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4 Item # C12064 and they informed about the true measurements.
The hitch measures 9.56” from the frame rail to the bottom of the receiver tube. There are 6 mounting holes on the hitch, 3 on each side. Center to center on the two mounting holes closest to the rear of the vehicle is 42.25”. Center to center on the pair of mounting holes towards the front of the vehicle is 40.94”.
Although...
view full answer...
Go To Results