The Roadmaster Direct-Connect Base Plate Kit # RM-524459-5 uses a 3/4" Pins # RM-910029 to secure to the crossbar.
We do carry the Blue Ox Base Plate Adapter Brackets for Ready Brute Elite Tow Bars # BX88297 that will fit with the Universal Tow Bar Adapter for Roadmaster Direct-Connect Baseplate # RM62ZR. view full answer...
The tabs on the Roadmaster Direct-Connect Base Plate Kits are 2-1/4" wide inside to inside. These tabs are designed specially for Roadmaster tow bars such as the Roadmaster Nighthawk All Terrain Tow Bar part # RM-676. That said, there are adapters available that allow you to use different brand tow bar so just let me know what you have and I will see if one is available. The Blue Ox Tow Bar to Roadmaster Base Plates Adapter Brackets part # BX88185 allows you to attach a Blue Ox tow bar... view full answer...
To connect a Blue Ox base plate to a Blackhawk 2 All Terrain tow bar like item # RM-422 you will need the Roadmaster Tow Bar to Blue Ox Brackets Adapter item # RM-031. view full answer...
The Roadmaster Direct-Connect Base Plate Kit # 52923-5 uses pins that are 3/4" in diameter like the RoadMaster 3/4" Diameter Pin with Linchpin and Chain # RM-910008-00 to attach the tow bar to the base plate kit. view full answer...
In regards to the Replacement Swivel Collar for Roadmaster Tow Bars part # RM-9200-6, the diameter of the pin used to secure the collar to the base plate kit is 3/4" diameter and the width of the collar here it attaches to the base plate kit is 2-1/8". The distance between the two tabs which attach to the tow bar end are 1-9/16". I went out to our warehouse to measure these for you.
I have attached a photo below of these dimensions as well. view full answer...
To connect a Roadmaster Falcon 2 tow bar to a Blue Ox base plate you will need the Roadmaster Tow Bar to Blue Ox Brackets Adapter item # RM-031. view full answer...
I went out and measured the distance between where the legs of the tow bar attach on the Roadmaster Base Plate to Tow Ready Tow Bar Adapter, # RM-025, and the on center measurement is 31 inches.
The distance between the mounting bolt holes that attach to the vehicle base plates is 28-1/2 inches on center.
If you are looking for the overall length it is approximately 34 inches. view full answer...
The etrailer SD Non-Binding Tow Bar for Roadmaster Direct-Connect Base Plates item # e74ZR weighs only 41 lbs. This tow bar works with Roadmaster direct connect base plates and has a 6,000 lbs capacity. It also includes the safety cables.
I have linked an installation video below so you can see how to get this tow bar set up. view full answer...
I have a solution for you but the Blue Ox Tow Bar to Roadmaster Adapter item # BX88178 is the opposite of what you need to use a Roadmaster tow bar with a Blue Ox base plate.
Instead you will want to use one of the following adapters. You're going to need to check the serial numbers on your tow bars to determine which is the correct one though.
RoadMaster Blackhawk 2 All Terrain or Sterling Tow Bars to Blue Ox Brackets Adapter item # RM-031-5. These adapters work with Blackhawk 2 All-Terrain... view full answer...
For your 2008 Chevy HHR, the Roadmaster Crossbar-Style Base Plate Kit - Removable Arms # 3141-1 is a great option that is compatible with the Roadmaster Falcon tow bar. If you don't have the crossbar, you can either replace it using the Replacement Quick Disconnect Crossbar Assembly for Roadmaster Motorhome Mounted Tow Bars # 910021-00 or you can use the Demco Tabless Base Plate Kit # DM9519196 which will also directly fit your tow bar and not require the crossbar disconnect.
If need... view full answer...
The Roadmaster base plate kit part # RM-52300-5 that you referenced weighs a total of 48 lbs. A typical tow bar like the Falcon 2 part # RM-520 weighs 61 lbs. view full answer...
The best non binding tow bar for the Roadmaster EZ Base Plate Kit item # 521433-1 is going to be the etrailer SD Non-Binding Tow Bar item # e44ZR. This tow bar is compatible with Roadmaster Crossbar-Style Base Plates like the one on your 2012 Jeep Liberty.
The latches on this tow bar let you easily release your Jeep, even at a hard angle or on unlevel ground. It has a stainless steel construction with telescoping arms and a large hookup radius that makes hooking up easy.
I have linked... view full answer...
Yes, it will but you will have to use the RoadMaster Base Plate to Blue Ox Tow Bars Adapter item # RM-033. This adapter will let you connect your Blue Ox Aventa LX Tow Bar to the Roadmaster Crossbar-Style Base Plate Kit item # RM37RR.
Some other parts you will need to flat tow your 2023 Ford Maverick are listed below:
Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267
Supplemental Braking System - Blue Ox Patriot Radio Frequency, Portable Braking... view full answer...
The Roadmaster EZ5 Base Plate Kit part # RM-521448-5 which is a fit for all models of the 2018 Jeep JK Wrangler with the standard factory bumper weighs approximately 39 lbs. If you need a tow bar that is compatible with this base plate kit then I recommend the Roadmaster Nighthawk All Terrain Tow Bar part # RM-676 because it has integrated lights, wiring, and safety cables.
In addition to the base plate kit and tow bar you will also need a supplemental braking system, wiring harness,... view full answer...
The distance between the tabs of the Adapter for Blue Ox Tow Bars to Demco Classic Base Plates # DM9523034 that you referenced is 1-5/8 inches. view full answer...
The correct base plate kit for your 2009 Mini Cooper hardtop base model is the Roadmaster Crossbar-Style Base Plate Kit item # 521878-1. This will connect right to the crossbar on your Falcon 2 Tow Bar item # RM-520.
Here are a couple of other parts you will need to flat tow your 2009 Mini Cooper:
Wiring Harness - Roadmaster Tail Light Wiring Kit with Bulbs item # RM-155
Supplemental Braking System - Blue Ox Patriot Radio Frequency item # BLU37TR view full answer...
I checked with Roadmaster and yes the Roadmaster Crossbar-Style Base Plate Kit item # RM-523184-4 is exactly what you want to tow your 2017 GMC Terrain with a Roadmaster 5000 tow bar. view full answer...
I reached out to Demco and the Demco Tow Bar Adapter for Duncan Base Plates # DM9523017 you referenced does not have a specific tow weight rating. It's towing capacity is going to match the maximum weight capacity of the Duncan base plates you are using.
If you do not already have a Demco Tow Bar I highly recommend taking a look at the Demco Commander II Non-Binding Tow Bar # DM9511012 due to its non-binding arms that make unhooking your vehicle easy even on un-even ground, and offers... view full answer...
No, it does not but I have one that does. To flat tow your 2020 Jeep Wrangler with a Ready Brute Elite tow bar you will need the Blue Ox Base Plate Adapter Brackets for Ready Brute Elite Tow Bars item # BX88297 and the Blue Ox Base Plate Kit item # BX1139. Blue Ox is the only company that makes an adapter for the Ready Brute Elite tow bars and the adapter only works with their base plates.
Here are some other parts you will need to flat tow your 2020 Jeep Wrangler:
Supplemental Braking... view full answer...
The distance between the two tabs (inside to inside) that connect to the tow bar on the Adapter for Roadmaster Tow Bar to etrailer Classic Base Plates part # e98983 is 1.5". view full answer...