The MagnaFlow Cat-Back Exhaust System - Stainless Steel - Gas # MF15136 is a confirmed fit for your 2016 Cadillac CTS 3.6L V6 and a great choice to enhance the sound and performance of your Cadillac. The actual product weight is 46 lbs but the shipping weight with all the packing materials is 79 lbs. The shipping size is 57 x 13 x16 inches. view full answer...
I looked at an online copy of the owner's manual for your 2011 Cadillac CTS and it states that your car can tow no more than 1,000 pounds. You should check your owner's manual to verify this.
The Curt Trailer Hitch Receiver # C11196 has a maximum towing capacity of 2,000 pounds however this will not increase the capacity of your Cadillac. You are limited by the lowest rated factor which in this case is the car.
If you're going to use the hitch to carry anything other than a trailer... view full answer...
The bottom of the Draw-Tite Sportframe Trailer Hitch, item # 24767, will sit about 2-3/4 to 3 inches below the rear bumper on your vehicle. This dimension is a best guess for your vehicle because there is not a set dimension for the amount of extension below the bumper on your 2008 Cadillac CTS. Too many variables account for the final placement of the hitch receiver, such as the hitch itself, the vehicle frame and the vehicles rear bumper and fascia orientation on the vehicle. I based... view full answer...
Yes, there adapters you can use. The Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver, part # HTAD, will fit your 1-1/4" trailer hitch. Adding a hitch adapter may be problematic because it reduces the maximum tongue weight of the trailer hitch by 50%. This would reduce your tongue weight to 100 lbs. Your bikes and the hitch bike rack could not exceed that weight when added together, severely limiting what you can carry.
I have included a product description link and a video review link... view full answer...
The flat portion of the top of this Aluminum Tread Plate Trailer Fender # HP49VR that you referenced is 13 inches, the entire top of the fender is 16 inches. Check out the picture I attached to see this measurement.
As long as you used plenty of bolts to securely install this fender to your trailer there is no reason you could not bolt it to your trailer instead of welding it. view full answer...
Go To Results