I pulled one of the # A36RB lenses from the warehouse and it measures 2-13/16 inches wide by 2-1/16 inches long. The mounting holes are 2-3/8 inches apart.
This lens fits the Optronics side marker light # MC36RB which measures 2-3/4 inches long by 2-1/8 inches wide by 1 inch deep.
I am including a picture that shows the dimensions. view full answer...
I checked the specs noted in the online owner's manual for the 2007 Cadillac Escalade and on page 378 it does indicate a maximum trailer weight of 8100-lbs for the Escalade AWD with 6.2L engine and 3.42 rear axle ratio.
If the trailer has a dry weight of 6000-lbs then it is quite likely that by the time you fill the propane tanks, water tanks, load your food, supplies and recreational gear you could have an actual loaded trailer weight much closer to your Escalade's limit.
There is a... view full answer...
You'll be pleased to hear the base of the:
-Malone Crossbar Conversion Kit for Standard Utility Trailer # MPG475 measures 32" before the bar starts to curve upwards.
I have also attached an image showing this measurement for you to check out. view full answer...
The final authority for tow capacities on a vehicle will be the owners manual.
From the research I did on your 2014 Cadillac SRX it looks like the max trailer weight you would want to tow with would be 2,500 lbs. You will still want to confirm this with your owners manual though.
If you need a hitch I would recommend the Draw Tite Hitch part # 75682. Our customers have rated this hitch highly. I attached an install video for this hitch for you to check out also.
To complete your towing... view full answer...
The etrailer Trailer Hitch # e62AR and the Curt Trailer Hitch # C13285 for your 2017 Cadillac XT5 are rated for capacity based only on the hitch, not the vehicle. You will be limited by the vehicle capacity, and not the capacity of the hitch. In this case, using either hitch with that large a trailer weight would void your warranty on the vehicle, but not the individual hitches. view full answer...
The final authority will be the owner's manual of your 2005 Cadillac STS, but from the research I did it looks like the max towing weight for your vehicle would be 1,000 lbs. The Curt hitch part # C11307 has a 2,000 lb capacity, but a towing setup is only as strong as the weakest component so you would be limited to 1,000 lbs regardless of what hitch you use.
For trailer wiring you would want the part # C59496, ball mount part # C45522, pin and clip part # F-4, 1-7/8 ball part # C40001,... view full answer...
The flat portion of the top of this Aluminum Tread Plate Trailer Fender # HP49VR that you referenced is 13 inches, the entire top of the fender is 16 inches. Check out the picture I attached to see this measurement.
As long as you used plenty of bolts to securely install this fender to your trailer there is no reason you could not bolt it to your trailer instead of welding it. view full answer...
We do not have any trailer hitch for your 2006 Cadillac STS that is able to tow that much. We only have the Class I hitch # 24767 from Draw-Tite or # C11307 from Curt. Both of these are rated for 2,000 lbs maximum. view full answer...
No, we do not and I checked with our vendors there isn't one out there. The Curt Front Mount Hitch item # 31302 you were looking at is the only one available for a 2003 Cadillac Escalade.
I have linked an installation video below to show you how it sets up. view full answer...
The bottom of the Draw-Tite Sportframe Trailer Hitch, item # 24767, will sit about 2-3/4 to 3 inches below the rear bumper on your vehicle. This dimension is a best guess for your vehicle because there is not a set dimension for the amount of extension below the bumper on your 2008 Cadillac CTS. Too many variables account for the final placement of the hitch receiver, such as the hitch itself, the vehicle frame and the vehicles rear bumper and fascia orientation on the vehicle. I based... view full answer...
I went ahead and checked out the:
-Draw-Tite Max-Frame Trailer Hitch Receiver # 76266, and was able to find a hitch height of 18".
Additionally, if you need help finding the correct rise/drop for your application, I'd be happy to assist.
All you're going to need to do is measure the distance from the ground to the top of the receiver, then from the ground the bottom of the trailer coupler, and subtract the two measurements. The difference is the rise/drop you need.
For instance, if... view full answer...
To install a 7-Way harness on your 2024 Cadillac XT4 you will need two separate wiring harnesses because they don't make just one that'll do the job.
The first harness you'll need is the Curt T-Connector Vehicle Wiring Harness item # C44FR. This custom-fit T-connector plugs into your Cadillac's wiring harness, which is located behind the center of the rear bumper. This will provide you with a 4-flat connector.
The second harness you will need is the Universal Installation Kit for Trailer... view full answer...
Congrats on the new vehicle! To add a Yakima roof rack to your 2024 Cadillac XT4 with flush rails you will need the following parts:
Yakima CoreBar Crossbars - Steel - Black - 50" Long - Qty 2 item # Y00421 or item # Y00428 for silver crossbars
SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails - Qty 4 item # Y53TR
Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4 item # Y00245
I recommend adding the Yakima Same Key System item # Y07204 to help prevent... view full answer...
Congrats on the new vehicle! The best hitch for a 2024 Cadillac XT4 is the Curt item # C39FR. This hitch is custom fit and bolts to your Cadillac with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity and a 400 lbs maximum tongue weight.
The reason the Curt hitch item # C39FR is the best option is because it installs behind your rear bumper cover and can be completely hidden when you are not towing.
I have attached a couple of pictures... view full answer...
To attach a roof rack that does not extend past the flush rails on the roof of your 2024 Cadillac XT4, I recommend the roof rack by Yakima which includes the following parts:
Yakima SkyLine FX Roof Rack for Fixed Mounting Points - Aero Crossbars - Black - Qty 2 item # Y76UV
Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4 item # Y00245
This aero bar roof rack system has a 165 lbs capacity and it does not extend past your roof rails.
I also recommend adding the Yakima Same... view full answer...
The Yakima Skybox NX 16 Rooftop Cargo Box # Y95AV offers a 16-cubic-foot volume capacity, plenty for the typical cargo of three persons. Yakima does not apply a specific weight rating to their boxes since they are never used alone, only with a specific roof rack and on a specific vehicle.
In the case of your 2013 Cadillac SRX the highest-rated aftermarket roof racks we offer have a 165-lb capacity. This includes racks from makers like Yakima, Rhino-Rack, Thule and others and this limit... view full answer...
I looked at an online copy of the owner's manual for your 2011 Cadillac CTS and it states that your car can tow no more than 1,000 pounds. You should check your owner's manual to verify this.
The Curt Trailer Hitch Receiver # C11196 has a maximum towing capacity of 2,000 pounds however this will not increase the capacity of your Cadillac. You are limited by the lowest rated factor which in this case is the car.
If you're going to use the hitch to carry anything other than a trailer... view full answer...
The cross tube of the # C13002 Curt Class III Receiver hitch is constructed of rectangular tubing that is 2-1/2 by 1-1/2. Looking at the front face of the cross tube, the tubing would be 1-1/2 inches tall and 2-1/2 inches deep, so the # 18159 would work for you. view full answer...
The MagnaFlow Cat-Back Exhaust System - Stainless Steel - Gas # MF15136 is a confirmed fit for your 2016 Cadillac CTS 3.6L V6 and a great choice to enhance the sound and performance of your Cadillac. The actual product weight is 46 lbs but the shipping weight with all the packing materials is 79 lbs. The shipping size is 57 x 13 x16 inches. view full answer...
Nope, not true at all. If your 2019 Cadillac XT5 came from the factory with a 7-way installed all you will need to do is plug in the Curt Echo item # C51180 and set it up. No additional wiring required. Some manufacturer's ship their vehicles without all the necessary towing fuses. GM is not one of them. If your power wire or ground wire isn't hooked up it's because someone removed them.
I have linked an installation video below along with the instructions so you can see how to get the... view full answer...
Go To Results