The Replacement Bevel Gear Kit # F0933306S00 is for applications.
The # F0933302S00 will fit the following Fulton jack models: TJ503/C, TJU503, PMJ53, TJ507/C, PMJ75, CS750, GR700/TJ712, XP10/6/W/WC and XP100.
Since your jack is as old as it is and you do not know which model you have or even if it is a Fulton jack, I cannot say for certain which gear kit you would need.
I attached a page that has all of our Fulton weld-on application jacks for you to check out. You may find that it... view full answer...
The Air Lift AirLift 1000 Air Helper Springs for Coil Springs will work in the exact manner you want; improving the ride and how your 2014 Ram 1500 handles when you are towing. These air springs will reduce the strain on your Ram's suspension and you will be able to readjust your weight distribution system; just note that you will want to inflate the springs before adjusting your weight distribution.
In regards to the difference between the Air Lift AirLift 1000 Air Helper Springs # AL60818... view full answer...
Between the Yakima HighRoad # Y02114 and Thule UpRide # TH599000 wheel-mount roof bike carriers I give the nod to the Yakima because it has two complete wheel hoops rather than one hoop and a clamp. This mounting method means more support the entire front wheel/tire. I would give the advantage to the Thule only if your tires are smaller than the 26-inch recommended minimum for the HighRoad; the UpRide accepts tires from 20- to 29-inches.
In terms of clamping force you can control this... view full answer...
The only ramps we offer without hooks that can load your 1979 Chevrolet Corvette that are close to 12' are the Race Ramps Trailer Loading Assist Ramps - 11" Lift - 136-7/8" Long - Qty 2, part # RR-TR-11-2. Instead of hooks, they have a lip for the transport ramp to rest upon.
Unfortunately, the Gen-Y Hitch Aluminum Loading Ramp Set - 144" Long x 15" Wide - 8,000 lbs, part # GH54FR, is not available without the hook.
I have included a product description link and a video review link below. view full answer...
I recommend the Firestone Ride-Rite Air Helper Springs part # F2445 over the Roadmaster Active Suspension (RAS) for a 2010 Toyota Tundra. The reason for this has to due with adjustability. The RAS is adjustable as well but this is not nearly as easy as the Firestone Airbags and will take much more time. The air bags allow you to adjust the psi to your exact load and get the perfect balance of support/comfort. The air can then be let out when not towing for a factory ride. The Roadmaster... view full answer...
While we do not have a 4-way converter like the Hopkins Vehicle Wiring Converter with 4-Pole End, part # HM48915, with a mounting bracket, you can easily add one for this using the Mounting Bracket 4-Pole Flat, part # 18144.
I've linked to an installation video of the bracket so you can see how it's done. view full answer...
For me, between the Access Cover, # A22010109 and the Truxedo, # TX250101, I would go with the Access cover because it is as low profile design. It sits only 1/2 inch above the bed rails. The Truxedo cover is 1-1/2 inches above the rails. Given that the prices are about the same, what would sell me on the Access cover is that low profile design.
In terms of keeping out water, the Access cover comes with a weather seal that runs along the truck bed sides and you can add a tailgate gasket,... view full answer...
On a transmission cooler there are three basic types of heat exchangers. The most efficient is the stacked plate. The next one is the plate and fin, which is very efficient. Then, the tube and fin which is moderately efficient.
It will also matter where the heat exchanger is installed. The best spot for the greatest efficiency is between your vehicles grille and the AC condenser core on your 2007 Jeep Liberty. The next best spot is between the AC condenser and the radiator. This spot will... view full answer...
The only difference between the 1/2 Inch Lug Nut, # 12CLN and # 12CLN-L is the length of each. Both are bulge style which means they have a 60 degree tapered end. The inside depth of 12CLN is 1-1/4 inches. The inside depth of 12CLN-L is 1-3/4 inches. view full answer...
The Yakima SpareRide 2 Bike Rack part # Y02599 and Thule Spare Me 2 Bike Rack part # TH963PRO are both great options for a 2011 Toyota RAV4. They both have similar features such as an included locking cables and anti-sway cradles. I recommend the Thule Spare Me because it is made in the USA, is physically lighter at around 15 lbs, and it comes with adapters to fit a wider ranger of applications. They both however are super easy to use but the Thule Spare Me will be easier to get on and... view full answer...
I can confirm for you that there is a difference between the # BWRVK3300 and the # BWRVK3305 with the construction of the base of the hitch, which is where you get the difference in capacities between the two hitches. The 3300 is only rated for 20,000-lbs where the 3305 is rated to pull 25,000-lbs. They do look the same, but the difference will be in the construction and stiffness of the base on the two hitches.
Both of these hitches are designed to fit in the factory pucks on Ford trucks,... view full answer...
The Loadstar ST205/75D15 Bias Trailer Tire that comes on the # AM3S640DX has a 5 year warranty against defects. The warranty provided on tires is going to vary from manufacturer to manufacture but belt separation would likely be covered in most cases within that time period. view full answer...
When comparing the Firestone Air Command II Compressor System w F3 Wireless Remote, Heavy Duty Compressor, Tank, Hose - Dual Path # F2591 to the Air Lift WirelessONE Compressor System for Air Helper Springs - Remote - Bluetooth - Single Path # AL25980 there are some significant differences.
Both are wireless systems that help you adjust your air pressure but that is where the similarities end. Your needs will either justify the cost difference in one direction or the other but you need... view full answer...
When installing a bike rack, bumper clearance is important. Two important measurements are hitch pin hole on receiver to end of bumper and hitch pin hole on the bike rack to the closest point of the rack. For bumper clearance, when we installed this on a 2009 Buick LaCrosse, the distance from the hitch pin hole to the end of the bumper was 6" with the Draw-Tite # 36374. I attached a picture for your reference.
As for ground clearance, the measurement from the top of the receiver to the... view full answer...
The main two differences between the Bulldog Winch Trailer Winch part # BDW15020 and part # BDW15018 are rope diameter and motor power which results in different weight capacities. They both have the synthetic rope, wired remote, and hawse fairlead. view full answer...
The ST205/75D15 tire that you've currently got are the same size as a tire like the Karrier ST205/75R15 Radial Trailer Tire - Load Range C # AM10244, but the difference is that your D15 tire is a bias-ply tire where the Kenda Karrier R15 tires are radial tires. The cords inside a bias ply tire run at a 32 degree angle to the direction of travel, whereas cords on a radial tire run at a 90 degree angle, or across the tire from wheel lip to wheel lip.
This really just means that radial tires... view full answer...
The Demco Hydraulic Brake Line Kit for Single Axle Trailers part # DM5427 and Demco Hydraulic Brake Line Kit for Single Axle Trailers part # DM5426 are almost identical.
The only exception being one of the steel brake lines in the DM5426 kit is 80" and in the DM5427 kit it is 72". Everything else is identical. Same hoses, lines, keepers, screws and hardware.
I have linked a video my buddy Shano did of the kit if you would like to check out how it all works together. view full answer...
Thank you for your purchase of the Atwood Gas and Electric 10-Gallon Water Heater # AT94186 to replace your RV's failed unit.
In most RV applications an electric power source will tend to be more consistent than a gas source and so for that reason Atwood's technician told me that in typical use electric power delivers faster heating of the water. This is not a rule so much as simply the typical behavior of these devices.
RV gas pressure can change quite a bit from when a tank is full... view full answer...
The two Titan brake actuators, parts # T2478100 and # T4750600, are the same actuator except the former is for drum brakes and the latter is for disc brakes. Part # T4750600 operates at a higher pressue (around 1,500 psi) which is what is required for disc brakes where part # T2478100 only operates about 1,000 psi.
You want to select the appropriate actuator because the higher pressue is too much for drum brakes and the lower not enough for disc. view full answer...
Go To Results