For the 2014 Nissan Murano Cross Cabriolet convertible we do have a hitch option from Curt, their 2-inch Class III model # 13577 and another option from etrailer # e65AR. These hitches come with all required mounting hardware and is a no-drill installation. A hitch installation article for each hitch is linked to help you with the install.
With either hitch installed you can use a 2-inch hanging or platform bike rack of up to 5-bike capacity, thanks the to hitch's substantial 400-lb tongue... view full answer...
I spoke with my contact at Curt and we suggest taking a look at the Curt Upgraded Circuit Protected Powered Tail Light Converter w Hardwire Kit and Tester - 4-Pole Flat # C59496, for your 2011 Nissan Murano CrossCabriolet.
This wiring harness offers the best technology, there is virtually no draw on the vehicle's taillight circuit, has short circuit protection which safeguards itself and the tow vehicle against electrical shorts, and also prevents feedback from the trailer to the vehicle.
This... view full answer...
The # e98891 cable lock and the # e98882 Hitch Lock by DeadBolt are indeed available keyed alike. Simply use the drop down menu on each product page, and select the 'Keyed Alike' option, as you can see in the photo I've edited for you. view full answer...
Some vehicles can be equipped with more than one size/class of trailer hitch but for your 2012 Nissan Murano SE a 2-inch Class III hitch is offered. The hitches made for the non-CrossCabriolet models like yours are shown on the linked page. Both offer identical capacities and no-drill installation so your choice can be based on whether you prefer the appearance of the gloss black round tube Curt # 13577 or the matte black round tube etrailer # e65AR.
Installation videos and written instructions... view full answer...
For your 1994 Newmar Motor Home with 460 (V8) motor and a Ford F53 chassis you will need to use the Roadmaster Reflex Steering Stabilizer with Mounting Brackets, part # RM-RBK4-RSSA. This will give you the reflex steering stabilizer with the spring and the correct mounting brackets for your application.
This application is for the 1989 to 2007 Ford F53 chassis with the V8 engine. view full answer...
We do offer one 2-inch hitch option confirmed to fit your 2011 Nissan Murano Crosscabriolet, part # 13577 from Curt. This Class III hitch is a no-drill installation and the process is shown in the linked video. Written instructions are included too.
I linked a photo that shows you the appearance of the hitch and car after installation. The hitch's round cross tube will be visible under the bumper cover.
If you plan to do some towing you will need a wiring harness # C59236 to send stop/turn/tail... view full answer...
There are no heavy duty weight distribution heads available with two friction sway control ball mounts. If you need two friction sway controls you would be much better off to upgrade to the Dual Cam High Performance Sway Control, item # RP26002. This sway control system will work with the Reese Heavy Duty Round Bar Weight Distribution System, as long as the bars have the curved ends.
If you need a friction sway control added to your trailer you may want to check your trailer tongue weight.... view full answer...
You can see the available 2-inch Class III hitches for your 2015 Nissan Murano by clicking on the link provided for you. Since you will be using the hitch for a scooter carrier you want to use the highest tongue weight (TW) hitch you can.
I recommend the Draw-Tite trailer hitch # 75952 since it offer a 600-lb TW capacity. Installation is shown in the linked video and instructions. Installation requires basic hand tools (please see the instructions for a complete list) and also a torque... view full answer...
We haven't had the chance to install either the Swagman XTC2 part # S64670 or the Hollywood Racks # HR1000z on your 2009 Nissan Murano but I can tell you an easy way to determine where the wheel trays will end up when either hitch is installed. If you measure from the center of your hitch pin out 8 inches that's where the first wheel tray will be for the XTC2. If you measure 12-1/2 inches that's where the Hollywood Racks wheel tray will be.
It's not recommended that you totally remove... view full answer...
To carry a bike rack with your 2011 Nissan Murano Cross Cabriolet will require you to install a trailer hitch first as there are no trunk mounted options.
For a hitch you would need the part # 13577 as it is the only confirmed to fit option we have.
The most popular bike rack we carry that has been confirmed to fit this vehicle is the Swagman XTC2 Bike Rack part # S64670. This rack has a ton of positive reviews from our customers who have tried it. Check out the review video I attached... view full answer...
The Curt # C18153 doesn't have a threaded insert for an anti-rattle hitch bolt, but that does not mean that there aren't anti-rattle options available.
For a locking hitch pin with an integrated anti-rattle feature, I'd recommend the # 63232. Another option would be a locking hitch pin like part # e98882 and a separate anti-rattle device like # RM-061.
Both options are pretty effective, but I'd lean toward the # 63232 because it's going to be easier to install and remove. I've linked... view full answer...
My research indicates Timken bearing 3062 has an inner bore diameter of 0.6250-inches, which is very small compared to the bearing and hub products we offer. The smallest bearing we offer has an inner diameter of 0.750-inches and is part # LM11949. This is rated for hubs used on 3000-lb axles. We have no hubs that use smaller bearings like yours.
You may find it easier to replace your entire axle with a kit that includes hubs, bearings, races, seals, etc. I linked our page for axles which... view full answer...
Go To Results