The Curt hitch part # C11701 is a confirmed fit for your 2007 Mercedes Benz E-350 and has a towing capacity of 2,500 lbs. You'd have to contact a Mercedes dealer or the owner's manual to determine what the vehicle's towing capacity is and be sure not to exceed the lowest capacity between the hitch and the vehicle.
For a ball mount you'd want the part # C45561 and then for wiring you'd want the part # 119250KIT which is a confirmed fit and will work well. view full answer...
For your 2013 Mercedes-Benz E-350 wagon, you'd want to use the Curt Class I hitch, part # C11189. The # C11001 is a fit for the E-350 sedan only, and wouldn't fit your wagon.
If you're planning on doing some light duty towing, you'll need a ball mount like part # C45521 and # A-82 for a 2 inch trailer ball or # A-80 for a 1-7/8 ball. You'll need to see your dealer for the trailer wiring harness.
I'll also link you to our selection of accessories that are compatible with your vehicle. view full answer...
I contacted the manufacturer about your question, they responded that if you have the sedan model, the Curt Trailer Hitch Receiver, # C11001 should fit your vehicle without issue. However, the # C11404 for the E350 Wagon will not fit the E250 wagon models. view full answer...
Curt offers their light-duty 1-1/4-inch Class I hitch model # C11830 for your 1999 Mercedes-Benz E-Class E320 Wagon. This is the only hitch option we offer for this vehicle. Installation is fairly complex (9 out of 10 difficulty level) and some drilling is required. Written instructions and a helpful article are linked. view full answer...
For the 2005 Mercedes-Benz E-Class E-320 sedan Curt offers their light-duty 1-1/4-inch Class I hitch # C11701. I confirmed its fit with my contact at Curt. This does NOT fit vehicles with the sport package, please note.
If you plan to use the hitch for a bike or cargo carrier be sure to select a compatible Class I-rated accessory, such as the Kuat Transfer 2 Bike Platform Rack # KU74FR or the Curt Cargo Carrier # C18145. view full answer...
Currently I do not see anyone manufacturing a custom fit receiver for your 2023 Mercedes-Benz EQE 350 SUV 4-matic. I recommend reaching out to a local fabrication shop to see if they would be able to use our 2" Weld On Receiver # E17 to fabricate a hitch for you. view full answer...
Currently there is no hitch offered for the 2010 Mercedes-Benz E-Class Coupe, only for the sedan version. Hitches are designed expressly for specific vehicles and so it is not advisable to attempt to install one on a vehicle different than that for which it was intended.
The Curt hitch you referenced, part # C11001, is a light-duty Class I hitch suitable for use with a hitch- mount bike rack or cargo carrier. Please note that your vehicle does not carry a rated towing capacity according... view full answer...
Stealth Hitch confirms that their SHT25001 which we sell as part # SH44GR would be a fit for your 2017 Mercedes-Benz E400 wagon is the proper setup for towing.
The # SH37MR is the same hitch, but the receiver that's included with it isn't intended for towing. The # SH44GR includes the hitch, the receiver for hitch mounted accessories, the ball mount for towing with the 2 inch trailer ball and the hitch wiring.
The trailer ball is removable, and can be replaced with a 2-5/16 ball with... view full answer...
Curt Manufacturing does indeed offer a Class I hitch for your Mercedes E-350 sedan, the part number is # C11001. Curt's warranty requirements state that if the hitch is used for a non-trailer load like a bike rack or cargo carrier, a stabilizing strap like part # 18050 needs to be used.
If you'll be using the hitch to tow a light duty trailer, you'll need the following:
Ball mount, part # C45521
1-7/8 inch trailer ball, part # A-80 or 2 inch ball, part # A-82
Trailer wiring harness, part... view full answer...
There is still a way to wire your 2015 Mercedes-Benz E Class Station Wagon for towing a trailer, even in the absence of a custom wiring harness.
It sounds like your vehicle doesn't have any trailer wiring right now. If your Mercedes-Benz did not come with its own 4-way flat connector, you'll need to start with a universal tail light converter like the Tekonsha # 119250KIT to create one.
If your trailering application requires an electronic brake controller, I recommend using our kit #... view full answer...
I have a really great 3-bike truck rack that does fit your 2014 Mercedes E-350 coupe with the Saris Bones EX part # SA803 but the Thule Raceway does not fit. I checked with Thule just now to have this confirmed. The Bones is a very similar design that will work really well for you. For more info on it check out the review video I attached as well. view full answer...
Go To Results