The Curt Echo Wireless Trailer Brake Controller # C51180 is a plug and play brake controller that you can use with your 2013 Jayco Seneca 37FS. This will plug in line of the 7-way trailer connection and you are able to adjust your trailer brakes from your smartphone using the Curt Echo app. This controller is proportional so it will automatically adjust for light or hard braking once you have it set to your trailer.
A Manual Override Button # C83HR is available if you prefer to have one... view full answer...
I have contacted the manufacturer to verify options, at present the Lippert Thin Shade Complete Window Kit # LC806621 is only available in black. view full answer...
I have contacted Command Electronics about replacement availability of the LED RV Dome Light with Switch, # 328-K-1020WSM2. Currently replacement of just the board is not an option, the whole light fixture will require replacement. view full answer...
The Demco 50-Degree A-Frame Trailer Coupler # 12660-97SP can be used on your Jayco 23RB. This weld on coupler has the same 21,000lb rating, EZ Latch 2-5/16" coupler that fits a 50-Degree trailer A-frame that the Demco 50-Degree A-Frame Trailer Coupler # DM16680-52 you found. Since it needs to be welded on it is only primed in a red primer to prevent corrosion.
You will need a longer Coupler Lock like the Master Lock # 2847DAT since the Demco EZ Latch requires a minimum 3" coupler pin no... view full answer...
Your LT225/75R16 tires have a diameter of 29.5" and a width of 8.8" so the Adco US Flag Spare Tire Cover # 290-1785 you referenced is going to be just shy of what you need.
Luckily we also carry the Adco US Flag Spare Tire Cover # 290-1784 which fits a diameter of 29-3/4". The elastic opening easily slips over your tire and the hollow-bead welt cord tightens down to ensure a snug fit. view full answer...
I have another potential option, but we do not have an upgrade kit for a 14"x14" vent available. And to be completely honest, it wouldn't be the best route to go anyways. By the time you buy the upgrade kit and motor, it is going to cost you almost or as much as a brand new vent with powered fan.
I know you mentioned not wanting to do a complete replacement because your current one is under warranty, but your best option is a complete replacement and it will come with a warranty. So it... view full answer...
If your're not sold on the idea of using a cathole trowel like # 3732010 to dig a hole in the ground when it's time to do your business, well, I don't blame you!
Luckily, the Tote-N-Stor Portable RV Wastewater Tank # TNS25606 is designed to do exactly what you need. This particular one has an 11-gallon capacity and allows you to move your waste water to the closest dump station eliminating the need to move your entire RV each time your tanks are full and need to be emptied. This particular... view full answer...
The Stromberg Carlson RV Exterior Ladder w/ Hinges, # LA-401 will be our tallest ladder at 99-1/2". Use the part number # LA-401BA for the same ladder in black.
The Surco Universal Exterior RV Ladder w Center Hinges for Contoured Rear Wall, # SP501L is 97" and there is option of adding the Surco RV Ladder Extension, # SP503L for 48-1/2" or # SP504L for 30-1/2". view full answer...
Our main page for RV plumbing parts is linked for you and sewer parts are shown in the first section. These include hoses, connectors and fittings, valves, etc. Click on the type of item you need. I also directly linked all of our wye items for you.
Valterra item # T1014 is an RV Reducing Y with 3-inch Lug x 3-inch Stationery Flange x 1-1/2-inch Rotating Flange that connects to a gray-water valve. view full answer...
The correct crossmember support depends on the suspension you have on your 2015 27.5 ft. Jayco 5th wheel. Unfortunately that is not information we have, so you will need to take a look at your suspension to pick the correct option. I have listed the options we have below, listed by what suspensions they fit.
Stock Leaf Spring Suspension
# MR84AR
LRE, RE, or TRE Leaf Spring Suspension
# MR99ZR
CRE, SRE, or Stock Leaf Spring Suspension
# MR33WR
All of these crossmember options adjusts... view full answer...
The largest equalizers we have are the 14-3/4-inch Dexter # K13-142-02 and the Lippert Equa-Flex cushioned equalizers # LC314336 that are 14-5/8-inches. These Lippert rubberized equalizers replace the standard equalizers on your tandem-axle trailer's double-eye leaf spring suspension. The rubber cores absorb road shock. Both of these feature a 9/16-inch center bolt hole.
I linked for you our main page for trailer suspension parts including shackle straps and bolts as well as a helpful... view full answer...
We may have an option for you, though there isn't a way to get three keyed-alike sets of the Master Lock Trailer Hitch Receiver Lock and Coupler Lock Set - 1-1/4" and 2" Hitches # 3794DAT.
If you have a flat-lip coupler, you can get get keyed-alike sets of etrailer locks by hitting "Keyed Alike" on the drop-down on the product pages, which I'll link for you below. You would need to get the locks individually but they will all be keyed alike. So what you can use are the following:
- etrailer... view full answer...
I can come up with a solution or two for you, but the cable on the Curt # C55774 that you looked at measures about a foot long, so unless you have some slack in the motorhome's tow package harness that would make up that extra foot for you, you would need to make some modifications to an existing product.
The first alternative would be to use the # HM40975-11998, and cut off the US car connector on the motorhome and hardwire the pigtail from this connector into the tow package wiring.... view full answer...
For a square crossbar set the longest we have is the 60" Thule SquareBar Evo # TH712500.
The longest crossbar available is the 80" Yakima CoreBar Crossbar # 8880656 which comes as a single crossbar, but we also have the 79" Thule ProBar Evo Crossbars # TH713700 which are a bit more heavy-duty.
This is longer than even the ladder rack crossbars so you'll be hard-pressed to find something longer than that. If you let me know what you're planning on using this for I can see what else you... view full answer...
For your 2021 Jayco Redhawk 22j which is on the 2021 Ford E-Series cutaway chassis there is only one adapter available. That is the Curt Custom Wiring Adapter for Trailer Brake Controllers # C51432 which will work with a Curt brake controller like the Curt Echo Under-Dash Trailer Brake Controller # C27JR.
The Curt Echo Under-Dash Trailer Brake Controller # C27JR is a bluetooth-enabled brake controller that wirelessly connects to your smartphone, turning your phone into a brake controller... view full answer...
Yes, I see why you why you are looking for a front mount hitch, it is the perfect solution for your situation. I reached out to our contact at Draw-Tite about their option for front mount trailer hitch, # 65053. It is a confirmed fit for earlier year models of the E-Series but they replied that they do not yet have a solution for the 2022 model. My go suggestion for a situation such as yours is to recommend using the Roadmaster Dual Hitch Receiver Adapter, 6" Drop/Rise # RM-077-6. Or... view full answer...
Since your Jayco has the standard 3 bolt mounting flange for a trailer jack you can use a powered jack like the Electric Jack w/ Footplate # EJ-3520-WBX easily. This will bolt right up in place of what you have and will save you from having to crank the jack manually. view full answer...
A kit like the # HSE7K-T1 is designed to fit 7k axles and has a bolt pattern of 8 on 6-1/2. Based on the available information for your 2021 Jayco Eagle HT 280RSOK it either has 5,200 lb or 6,000 lb axles and a 6 on 5-1/2 bolt pattern. I recommend verifying your axle capacity to be sure. Based on this information I recommend the following:
-Kodiak Disc Brake Kit - 12" Hub/Rotor - 6 on 5-1/2 - Dacromet/KodaGuard - 5,200 to 6,000 lbs # K2HR526DKG
-Bearing Kit for Trailer Brakes with 12"... view full answer...
Go To Results