Hey David, so if you were willing to do some fabricating beyond cutting the bottom step off of a MORryde StepAbove like the part # MR38RR yes you could. It doesn't need the bottom step to be structurally sound. view full answer...
So we do have the Replacement Leg for MORryde StepAbove RV Steps # MR36DR, Replacement Leg and Footpad for Lippert SolidStep # LC39AF as well as the All Terrain Landing Gear for TorkLift GlowStep Scissor Steps # TLA8000 depending on what steps you may have. If you have more traditional fold out steps I have typically seen the Stabil-Step Stabilizer Jack # JSS-7 used in those situations. view full answer...
Hi Donna,
If you don't have enough room then there are other handrail options available depending on the style of steps your RV has. For example, if you have pull-out steps then you could install the Stromberg Carlson Rail Mate Folding Handrail for RV Steps # AP-101. This handrail has a bracket that you'll bolt to the side of the steps to allow you to easily mount and remove it as needed. If you have a different style of steps then let me know and I'd be happy to look for a solution. view full answer...
I don't have a way to look up that info by RV model info so I would need you to get me any part numbers you can find on your current steps so that I can piece it together from there. view full answer...
Hey Laurence, yes the Hollywood Rack RV Rider part # HLY64FR will work great with your Aventon Step Thru E-Bikes. It was designed to be able to carry e-bikes that have deep step thru frames like what you can see in the attached picture. view full answer...
Hey Braden, yes the Hollywood Racks RV Rider part # HLY64FR that you referenced can be used with step thru e-bikes. If you check out the attached picture you can see a step thru e-bike loaded on this rack. view full answer...
Unfortunately, I believe the information you have is a Jayco part number and likely something they make in house. It would make sense the 99.63 may be the height of the rack as the Stromberg # LA-401 & # LA-401BA are both universal options which are 99-1/2" tall. These both do have 7 steps versus the 6 on your lader. view full answer...
Good morning, Dennis. To update the 32 series step model 0108597 on your 2000 Tiffin Allegro, you will need the following:
- Motor Upgrade Kit for Kwikee Electric RV Steps # LC379145 view full answer...
Hey Jisvin, we do have some step pads made by PrestoFit which I attached a link to on this page but I would need ot know what brand and model steps you have to determine what you might need. view full answer...
That's a good question Allen but it's hard for us to say for sure what the function of the extra red wire is/was. If you have everything wired up on the new steps I would try using them and see if everything works like it should. If everything seems fine I would just tape up that extra wire and not worry about it. If the steps aren't functioning properly the wire might be needed but it would require knowing more about what's not working to get a better understanding.
Due to the age of... view full answer...
Great question Rocky, so when the Lippert Solidstep part # LC713662 is folded up in the stored position it will take up 10 inches of space inside the doorway of your RV. view full answer...
It does seem like you would need a new motor which would be be part # LC379167 that you referenced. But I would check to make sure all of the mechanical elements of the steps are in decent shape like the gear and linkage. It's possible something is bent or worn out and that's what's preventing the step from going all the way in or out. view full answer...
Thanks for all the information! It sounds like your Kwikee steps control module has gone out or the wiring to it is bad. I recommend checking all of the wiring going to the unit to make sure there isn't any cuts or faults. If not the part number 1510000140 you gave me corresponds to the Replacement Control Unit for Kwikee 40 Series Electric RV Steps item # LC363985. I recommend replacing it.
If you want me to take a look at those pictures feel free to email me directly. view full answer...
Hey Aaron,
To replace your Kwikee 25 Series sawtooth gear you'll need part # LC369354. As for the arm, the eyelets on the arm allow it to droop like you're seeing so that the gear can move back and forth without binding so it's not a cause for concern. view full answer...
Hey Velle, thanks for reaching out!
We have gas and electric water heaters like the Dometic RV Water Heater # DMC74FR, but to my knowledge none of the RV water heaters run off of pure electricity.
The Dometic one I referenced has a tank so I actually recommend replacing it with a tankless option like the Furrion # FR48SR which is much more efficient and powerful than the standard heaters that use traditional tanks on them. This Furrion only runs off of gas though so you won't be able... view full answer...
Hey Rick, if you absolutely sure your RV would never weigh more than 18k the part # DM8550024 would work fine as it's totally safe all the way up to 18k. If you think you'll end up over that number or want some "room to grow" then I would go with the 21k version part # DM8550038 instead. view full answer...