We have exactly what you're needing, Rex!
For your 9.9" diameter HWH jack feet you need the SnapPad HiWay 10 Jack Pads for HWH and Atwood Leveling Systems w/ 10" Round Jack Feet # SN58FR. view full answer...
According to SnapPad you are going to need their Mini Jack Pads # SN39FR. I know this may sound weird since you have 5-3/4" round bases and the pads have a square opening. view full answer...
Hi Barry, thanks for reaching out!
For your 10" HWH plates you can use the Replacement Pad for SnapPad Jack Stand Pad System # SP64FR but you'll need to get 2 of them since it's sold in a quantity of 1.
We don't have any pads for a 22" round plate but just in case you meant 12" plate we have the kit # SP64FR74 which comes with 2 pads for 10" plates and 2 pads for 12" plates. view full answer...
To register the 2-year warranty for your SnapPad Jack Pads you simply need to visit the manufactures website www.rvsnappad.com scroll to the bottom of the page and select the Warranty Info button. There it will allow you to register your warranty. view full answer...
Hey Bill, for a 2025 Entegra Aspire the correct Snappads would be the XTRA XL part # SP74FR which is for 12 inch diameter round jack feet. view full answer...
The Ark Drop Down Corner RV Stabilizer Jacks # ARK94FR are able to lock into place at 30 and 60 degrees as stabilizers. They also have the 90 degree position where it is rated for 1,929 lbs and then the stored position. view full answer...
Hey Dan, so the sealant you would want to use when installing an RV ladder like the part # LA-401BA is a non-sag sealant like the part # AL28KV. view full answer...
Hi there Dennis; good question and the difference is solely in their application, how they attach, and the parts to do so. If you have a 5th wheel trailer, and the space between the front landing gear is 58 inches (measured inside to inside) use the JT's Strong Arm Jack Stabilizer Kit for 5th Wheel RVs w/ 58" or More Between Landing Gear # LC191023.
the Strong Arm will attach directly to the landing gear legs; however, if you have a travel trailer with scissor jacks you will use the JT's... view full answer...
So we do have the Replacement Leg for MORryde StepAbove RV Steps # MR36DR, Replacement Leg and Footpad for Lippert SolidStep # LC39AF as well as the All Terrain Landing Gear for TorkLift GlowStep Scissor Steps # TLA8000 depending on what steps you may have. If you have more traditional fold out steps I have typically seen the Stabil-Step Stabilizer Jack # JSS-7 used in those situations. view full answer...
Thank you for providing those pictures. The correct control panel is the Replacement Control Panel for Lippert Ground Control 3.0 and Travel Trailer RV Leveling System # LC421484. view full answer...
Hey Julian, it would pretty expensive to replace your wife but we can definitely help with a new 7-way. If the part you need is the socket that mounts on the RV what you would need is the part # PK11893 or if was the plug that goes to the socket you'd want the part # A7WCB. view full answer...
Hi Ray,
Well that sounds pretty frustrating, but I can tell you that we do have the Bauer keys you need:
- Replacement Key for Bauer AE Series Lock - AE037 # BA32MR
- Replacement Key for Bauer AE Series Lock - AE032 # BA65MR
These come in a quantity of one key, so just be sure to enter "2" in the Qty box for the # BA32MR. So that'll take care of at least the Bauer keys, though unfortunately we don't have a jack key number 2007 or SP1 battery box key. It's possible you may have to go... view full answer...
Hey Tim, you can install the JT's Strong Arm Jack Stabilizer Kit for 5th Wheel RVs # LC191025 on a travel trailer with the Ground Control auto leveling system but you will also need the adapter part # LC314592 according to Lippert. view full answer...
Thanks for the kind words, Jack!
I typically recommend using the higher rated SumoSprings when it comes to motorhome just because they are heavier and the SumoSprings won't engage unless needed. This means for your 2020 Thor Quantum CR24 motorhome you need the following:
- Front # SSF-106-47
- Rear # SSR-338-54
Attached are some installation videos for you to check out! view full answer...
The Hydrastar Disc Brake Kit # HSE7K-T1 you found is the correct kit for your 2022 Forest River Cedar Creek 345IK. I was able to verify your spindle through the Dexter axle numbers provided. This kit makes it easy as it includes the rotor/hubs, calipers, actuator, bearings, seals and brake lines you will need. You will be able to reuse your current grease caps other wise we have the Pairs # rg04-120 of which you would need 2 for both axles.
It appears your Cedar Creek has hydraulic jacks... view full answer...