You are going to need the Repair Kit # RM-910003-55 for your Roadmaster Falcon 5250 tow bar. The Kit # RM-910003-60 you found is only for the Roadmaster Falcon 2 # RM-520 or BlackHawk # RM-422 tow bar. view full answer...
Both the old Falcon 5250 tow bar and the current Falcon 2 # RM-520 will work with the same crossbar assembly part # RM-067. So if you already have the Roadmaster crossbar you should not need any additional parts to bring it together with the Falcon 5250 tow bar. You would just secure each arm using the Base Pins # RM-910029. view full answer...
Hey Lyle, yes the Roadmaster Tow Defender part # RM-4750 will work with your Blue Ox Base Plate kit and Roadmaster tow bar part # RM-676. view full answer...
Hey Robert, for your 2016 Jeep Wrangler using the Ready Brute Elite II tow bar you can use the Blue Ox Base Plate Kit # BX1126 with the Blue Ox Base Plate Adapter Brackets for Ready Brute Elite Tow Bars # BX88297.
From here, to complete your flat towing setup you'll just need a braking system # BLU37TR with the 12V outlet kit # RM-9332, and a set of tow bar wiring # TL21RK. view full answer...
Hey Dee, the Demco base plate kit part # DM9517190 that you referenced is perfectly compatible with the Demco Commander tow bar part # DM9511012. view full answer...
Hi Andy,
The Roadmaster Tow Bar to Blue Ox Brackets Adapter # RM-031 would allow you to connect your Roadmaster Sterling All Terrain Tow Bar to the Blue Ox Base Plate Kit # BX2163 as long as the tow bar's serial number is up to up to 16,500. If your serial number is higher you'll need to use # RM-031-5 (works with serial numbers 14,501 and higher) instead. view full answer...
Hey Jeff,
Since most tow bars have to sit up 90 degrees and then turn to either side to stow you'd almost certainly need to remove a bike rack. The Roadmaster Dual Hitch Receiver Adapter # RM-077-4 you were looking at would allow you to haul both but it along with even their largest version # RM-077-10 would likely still have the bike rack block the tow bar from stowing. view full answer...
Your Roadmaster BlackHawk with the Serial 013797 is definitely older than July of 2020 but aside from that I don't have any more insight into how old it is. When I reached out to my contact at Roadmaster they said their computer system only goes back to July of 2020 with serial numbers and when they ran yours nothing came up which means yours is older than that.
If your goal is tow bar maintenance then we have the following parts you can use to service the Roadmaster BlackHawk tow bar:
... view full answer...
Hi Robert; hopefully your Roadmaster tow bar is one that attaches to direct-connect base plates as opposed to crossbar base plates; for example the 8,000 lb Roadmaster Sterling would be optimal. Assuming that, here is what you need to flat tow your 2024 Ram 1500 with a tow bar like the Sterling # RM-576:
- Base Plate Kit: Roadmaster Direct-Connect Base Plate Kit # RM-522203-5
- Wiring Kit: Roadmaster Wiring Kit # RM-15267
- Supplemental Braking System - MOTORHOME WITH HYDRAULIC BRAKES:... view full answer...
Hey Dal, so the Roadmaster base plate kit part # 1175-3 can be used with a Demco Commander tow bar part # DM9511012 but you will need to use the adapter part # DM9523032 with it. view full answer...
It sounds like you have a Roadmaster Falcon 2 tow bar # RM-520 which has a towing capacity of 6,000 lbs. I looked up the weight of a 2018 Jeep Grand Cherokee and it would weigh between 4,500 and 5,300 lbs so it would easily have the needed capacity.
So for a base plate kit for the Grand Cherokee you would want the # RM-521440-5 which is a confirmed fit, easy to use, and compatible with the Falcon 2. The price for this is available at the links below.
For lighting/safety cables, locks,... view full answer...
The Blue Ox Base Plate Kit # BX1728 you found is what you need to flat tow your 2017 GMC Acadia Denali AWD using the Blue Ox Avail Non-Binding Tow Bar # BX7420. You would want to use the Flat Tow Wiring Kit # RM-15267 to integrate your tail lights to operate off the tow vehicle. And you will need a supplemental braking system like the Brake Buddy Select # HM39524 due to the weight of your Acadia. view full answer...
Hey there Tyler; thanks for the question and we can get the 2021 Ford Ranger set up to be flat towed behind your motorhome. In regards to the tow bar, since the Ranger weighs not even 4,500 lbs you definitely don't need to spend more money to get the 10k tow bar, a less-expensive (but just as effective) option is what I would go with. As for the brakes are you talking about your motorhome? If it's a Ford F-550 it will have hydraulic brakes and not air brakes. So all that said, here are... view full answer...
Hey Cyndi, yes the Blue Ox base plate kit part # BLU82CR that you referenced is compatible with the Blue Ox Ascent tow bar part # BX4370. These two would work really well together. view full answer...
Hey Rick, yes the Roadmaster base plate kit adapter part # RM62ZR is the correct adapter to go from your Roadmaster Direct Connect base plate kit # RM-523193-5 to your Demco Excalibur tow bar part # DM9511013. view full answer...
Hey Mike, you're going to want to use the Roadmaster Tow Defender Protective Screen for Towed Vehicles # RM-4750 since # BX1312 is a direct connect base plate which means you'd use a direct connect tow bar like the Roadmaster Falcon 2 Tow Bar for Blue Ox Base Plates # RM-525.
But, If you have a crossbar style tow bar that uses quick connects then you'd need # RM-4700.
If you're needing to complete your setup then you're also going to need a braking system, like the Blue Ox Patriot Portable... view full answer...
Hey Rodney, good question so there isn't a single harness that will do both a tow bar lighting and trailer wiring solution but you can install both at the same time. So for trailer wiring you could use the Tekonsha part # 118786 and then for the tow bar lighting kit you'd want the part # C96JR. Basically the two kits would plug into each other and then back into your vehicle. view full answer...
Hey David, thanks for reaching out!
I recommend using the Roadmaster Falcon All-Terrain Tow Bar - Non-Binding - 6,000 lbs # RM-522 for your 2010 Jeep Wrangler because it has that non-binding feature and is more practical both when it comes to weight rating as well as pricing and functionality.
To make this compatible with the D-Rings on your Jeep bumper you'll need part # RM-035 for 3/4" Mounts or the part # RM-035-1 for 1" Mounts. view full answer...
Yes, you can flat tow your 2002 Honda CR-V behind your F-150 using either the Blue Ox Acclaim Non-Binding Tow Bar # BX4330 or the Blue Ox Adventurer Adjustable Tow Bar # BX7322. You will need the Blue Ox Base Plate Kit # BX2232 to give yourself the attachment points needed for connecting the tow bars.
You will want to also check your local laws to verify if you are going to need a Braking System # HM39494 due to the weight of your CR-V. This would also help to reduce wear and tear on... view full answer...