Hey Lawrence,
That is correct, solar panels systems are simply to recharge the battery and wouldn't directly power anything. They'll run directly to the battery bank. The Zamp inlet you have most likely is just a 2-pole SAE connector with a positive and negative wire ran directly to the battery for you plug in a portable solar panel system. An Inverter takes power from your battery bank and increases it from 12v to 120v so that you can run larger appliances without shore/generator power.... view full answer...
Hi Matt,
The Drive Wireless RV Backup Camera System # 324-000002 would not be compatible with the Furrion mount on the back of your trailer so you'd have to remove it and screw the included mounting bracket to the wall of the trailer. You'd also likely have a hole, or multiple, to fill from the old bracket so I recommend picking up some gasket maker to prevent any water from getting in.
The PWM wiring issue is more so with the truck and not the trailer or camera. Essentially the truck... view full answer...
Hello Justin, thanks for reaching out and for providing those pictures.
I will start by saying that your slide out awning technically is not installed correctly. There should be a 3" height difference between the awning rail and the mounting bracket. This allows water to roll off and away from the camper. It appears that your awning is almost level, so I can see why this would allow water to pool up and get in.
That said, I can also see why the contractor installed it this way. There... view full answer...