We have a similar etrailer hitch that fits your 2021 Ram 1500 Classic with the part # e98852, but the # e28ZR fits the non-Classic models. view full answer...
Yes, the Westin MAX Winch Mounting Tray # 46-23755 will fit your 2021 Ram 1500 Classic just fine.
Westin lists this out separately on their site but it's the same winch mount used in the full Westin HDX Winch Mount Grille Guard with Punch Plate # 57-93545 which they have listed out to fit your vehicle so you're good to go! view full answer...
Hey Tim,
That is correct, if your running boards are less than 2" from the wheel wheel then it will prevent fitment of the front mudflaps included in the WeatherTech Mud Flaps # WT110026-120026. At this time this is the only fit available that's compatible with the factory flares. view full answer...
Hey Sal, great to hear from you again!
The Redarc Plug-and-Play Wiring Harness # 331-TPH-020 will plug directly into the port on your 2023 Ram 1500 Classic so you can use either the Tow-Pro Elite # RED44FR or the Tow-Pro Liberty # RED24FR for towing trailers. I actually really like these brake controllers and I recommend them whenever I can.
The only time you would need to have your truck computer reprogrammed (or flashed) would be if you had the factory brake controller installed. Since... view full answer...
Hey Rick, thanks for reaching out!
The 10K GTW rating of the Fastway e2 Weight Distribution # FA94-00-1000 is the max trailer weight the system can handle.
With that being said, when you choose a WDH you need make your selection based off the loaded tongue weight of your trailer as opposed to the GVWR of the trailer. For example, if your trailer has a GVWR of 10,000 lbs then an appropriate loaded tongue weight (at max capacity) will be 1,000 lbs - 1,500 lbs so you'll want something rated... view full answer...
The Voyager # WVH100 is the first generation camera that has been discontinued. Unfortunately, this is not compatible with any of the new WiSight 2.0 monitors and the old monitors are no longer being produced. The only solution is to replace the system entirely with the # ASA84YR (4.3" screen) or # ASA57YR (7" screen). view full answer...