It sounds like you are looking for the Replacement Lock Cylinder for BOLT Toolbox Latch # BL7023482 which can key to the double side cut style key on your 2019 Toyota Tundra. We also have the following BOLT locks which you can code to your key.
BOLT Trailer Hitch Receiver Lock # BL7023584
BOLT Trailer Coupler Lock # BL7032495
BOLT Covered Padlock # BL7023539
BOLT Coiled Cable Lock # BL7023721
BOLT Trailer Coupler Lock # BL7025289
BOLT Locking Recovery Hook # BLT97FR view full answer...
The receiver on the EcoHitch Stealth Hitch # TL84CR bolts on. There is no lock available to keep it from being removed. However, if you look at the picture below you will see that the attachment point is hidden. Unless someone knows you specifically have the EcoHitch with a removable receiver they will not be able to tell that it can be detached. If it is still a concern I recommend getting the Curt # C38DR instead. view full answer...
The BOLT Spare Tire Lock # BLT66FR is the Bolt part number 7032301. This will fit onto a 1/2"-20 threaded stud. I have included images for the keys which work with this lock as well as the wheel hole requirement needed to fit inside the wheel. The problem may be your 2024 Willy's Edition has some wheels which may not be compatible with the lock. view full answer...
While typically manufacturer specific we have found that the Hitch Tite Anti-Rattle Hitch Lock item # SA3022 works extremely well with the Reese Q-Slot 4-bike bike rack. This is a 5/8" pin with a useable bolt length of 3-5/8". view full answer...
The bolts, washers, and lock nut for your Thule Transporter Combi are all available. You need the following:
-Replacement 12 x 40 mm Hitch Bolt for Thule Hitch Bike Racks # 908-1240-54
-Replacement M12 Washer for Thule Hitch Mounted Carriers # 951-1224-54
-Replacement M12 Lock Washer for Thule Hitch Mounted Products # 956122159
-Replacement M8 x 70 mm Hex Head Bolt for Thule Transporter Combi Hitch Mounted Cargo Carrier # TH96ZH
-Replacement Washer for Thule Sidearm Roof Mounted Bike... view full answer...
I do have one option for you since the Replacement BOLT Lock Cylinder # BL709231 is for the Tailgate Handle with BOLT Lock # BL5922987 and will not replace the factory lock on your 2015 Chevrolet Silverado 1500WT. For that cylinder you will need to visit a Chevrolet dealer.
We do offer the Pop & Lock Custom Tailgate Lock # PAL8140 that will allow for you to use the power locks on your 2015 Chevrolet Silverado 1500 WT to lock and unlock your tailgate so that you will not need the key. view full answer...
The etrailer Threaded Anti-Rattle Hitch Pin Lock # e99047 is an M16 bolt while the bolt that comes with the Thule Snug Tite Hitch Lock # THSTL2 is an M12, so even if the thread count was the same they wouldn't be compatible.
If you're just needing to replace the bolt for your Thule bike rack then you can use part # TH62RE, otherwise if you need the lock and washers then you'll need the kit # THSTL2 instead. view full answer...
Yes, the # DT65RR includes the 6 bolts, flat washers, and lock washers required to install the # 75282 on your 2022 Nissan Frontier. view full answer...
If your Demco Hijacker is a fixed fifth wheel hitch you can certainly use it with the Sidewinder with the custom wedge for Hijacker fifth wheel hitches part # SWW-05.
If your Demco Hijacker is a slider hitch like part # DM8550034 then you will need to lock out the side winder. Since the Reese Side winder moves the pivot point of the towing setup back 22" you cannot have a pivot point at the pin box and the slider hitch without causing damage.
If you look under the rotating turret there... view full answer...
Hi Adam!
The Saris Freedom Bike Rack for 4 Bikes # SA4414B will only work with the Saris brand of locking hitch pin so the kit you're looking or is the 8' Cable Lock and Anti-Rattle Hitch Lock for Saris Hitch Mounted Bike Racks # SA984.
Since the Freedom does come with an anti-rattle hitch bolt already, you can potentially just use a longer cable lock like the 10' etrailer # e98891 and just wrap it in and around your bikes, the bike rack, and through the safety chain loop on your trailer... view full answer...
The Global Link RV Entry Door Locking Latch Kit # GL55VR has the single latch with two different functions/modes. The upper keyhole locks the outside handle but still allows it to be opened from the inside for emergency exit. When you use the lower keyhole you engage the integrated deadbolt system. The single plunger doubles as a deadbolt. The keypad has the same functionality as the lower keyhole. view full answer...
I do have some options for you as the Draw-Tite Ball Mount Adjustable with Sway-Control Tab # 7390 is required to use the supplied 1/2" bolts.
The Shocker Hitch XR Adjustable Drop Hitch w/ Sway Control Tabs # SHK45VR is capable of using the InfiniteRule Locking Pins for Shocker Hitch Ball Mounts # IR39FR. The design of the Shocker Hitch is superior to the Draw-Tite so it is strong enough to be able to accept the locking pins. view full answer...
The # SA3022 will fit your Thelma 2 but it is considered an optional accessory so it doesn't match the brass bolt you're describing. The Replacement Hitch Tite Anti-Rattle Hitch Pin for Saris Bike Racks with 1-1/4" Shanks # SA3015 would be the standard replacement with that brass colored bolt. view full answer...
The bolt that comes with the # Y8890185 is the same as the # Y8890176. The bolt is a 1/2"-13 bolt that is 4.28" long with 2.5" of threads. view full answer...
We have the replacements for the knob of your Thule Apex XT, part # TH9024XT, here.
For the knob itself, you will need the Replacement Locking Knob for Thule Bike Racks, part # TH79JV. I've linked to a video review of this below.
Since you didn't have this to begin with, you will also need the One-Key System Lock Cylinders, part # TH450200. I've linked to a video review of this, too.
If you still need additional components, let me know. These are the only available. view full answer...
I am afraid we don't Marvin. It looks like that particular dead bolt lock is obsolete and there are no replacement parts available. If you are in need of a new one, we do offer one deadbolt lock, the Valterra Deadbolt Lock for RVs # L32CS3108. It looks like this has a much shorter deadbolt than the part you mentioned, so some modification would definitely be required in order to use it. view full answer...
You could run a bolt through the # DM8104311 to manually lock it out if the solenoid fails. However, there is no spot on the actuator to do this so it would require drilling. A Replacement solenoid # DM11993 is also available. The hole would require a 1/4" pin. We don't have a regular pin but you could use the # e98887 which would hold it in place and deter theft. view full answer...
If you're referring to the bolt that comes with the Replacement 2" Receiver for Curt Multi-Ball Adjustable Ball Mount # C45802 that is actually the anti-rattle bolt. It is 1/2" - 13, 1", grade 5. If you are referring to where it mounts to the # D900 it uses 5/8" hitch pins or locks like # e98881. view full answer...