Expert Answers about Jaguar Electrical Tools

• Can the Bluetooth control Kit Be Mounted Between the Cannister & a Tool Box
• Yes Jerry, the Bluetooth Control Kit for Pace Edwards Electric Tonneau Covers # PE63QJ should work fine between the canister and a tool box but you can fire it up and test it prior to mounting it. If you find that the signal isn't as strong, or that it's not responding you can just move it to a place with better signal.
  view full answer...


• Manual Hand Crank For A Lippert Electric Slide Out Motor
• Hey Carl, I'm going to need some more information on the motor that you have in order to find the correct hand crank. Are there any stickers on the motor that you could send me a picture of?
  view full answer...


• Does The Flex-a-lite 15" Black Magic Xtreme Electric Radiator # FLX180 Require Additional Parts?
• The Flex-a-lite 15" Black Magic Xtreme Electric Radiator Fan with Shroud # FLX180 will come with all the components needed for the installation. You will of course need your own tools to complete the installation if you are doing it yourself. If you would like to be able to switch on the fan from a switch you will also need the Flex-a-lite Illuminated Auxillary Switch # FLX31148 as well.
  view full answer...


• What Is The Best Way To Cut The Taylor Made Fiberglass Support Bow?
• Hello Greg. For cutting the Fiberglass Support Bow # 369924, I suggest using a fine-tooth hack saw. Something like 24 teeth per inch would be ideal for this. You basically just want a fine edge and will give you a smooth cut. You could also probably use a basic electric cutting tool or angle grinder. It might be a bit harder to get a good clean cut using these methods though. It really just depends on what you feel comfortable with. I can't really speak on the bass pro shop prices or products,...
  view full answer...


• Installing Electric Brakes on a Vehicle Tow Dolly
• You have a 3500 pound axle, with a 4-bolt axle flange, spaced 4” apart each. You also have tires and wheels with a 5 on 4.5 bolt pattern. To put brakes on your West Texas Dolly # WTD-35D you will need a left and right trailer brake kit like the etrailer # AKEBRK-35 rated for 3,500 pounds, and 10” x 2-1/4” brake pads. Mounting bolts are included but nuts and lock washers # BRKH10B are not. If it were me I would purchase the etrailer # AKEBRK-35-SA self adjusting brakes so that I would...
  view full answer...


• Upgrading Big Tex #35SA Trailer With Brakes
• It sounds like your Big Tex trailer did not come with brakes. Based on this, to convert your trailer with no brakes, to adding electric brakes, on your Big Tex 35SA trailer, the first thing you need is a left and right brake kit. You could use the Dexter 23-26-27 kit (includes left and right) which matches your Dexter axle 4” X 4” brake flange. However, for a little more I would recommend Dexter # 23-468-469 Nev-R-Ajust self adjusting brake kit. Most people do not want to have to periodically...
  view full answer...