Hi Steven; it looks like you're well on your way to a complete setup. The Pace Edwards UltraGroove # PE39QJ (Aluminum and Vinyl) and # PE36QJ (Aluminum) is compatible with the # RRVA180B-RRRLT600. All you need to do is add the Adapter Kit # RRT-FK1 to fit the UltraGroove rails. You may also want the # RRVA-LEC4 for added security with the metal lock cores.
Rhino-Rack makes a solid product and keeps the cost down compared to something like Thule and Yakima. These aren't the quietest crossbars... view full answer...
Hey Adam, thanks for reaching out!
Yes, you can use the Curt 10" Lube Plate # 16721 for your Demco Autoslide # DM8550024.
We also have this available in a 12" version as part # C16722 if you'd like a little more coverage. view full answer...
RVs in general have a much rougher ride quality than vehicles due to the less sophisticated suspension (mostly trailer) but also the much longer length between the rear axle of the motorhome and the rear bumper. This exaggerates the movement from bumps which puts an additional strain on the bike rack.
So fifth wheel trailers have the worse suspension and the increased length to bumper from axle which is why they have the harshest ride quality and the motorhomes only have one element of... view full answer...
While we have an option for you, from the photos I've seen, the EcoHitch Hidden Front Mount Trailer Hitch Receiver # EH59FR looks to extend ever so slightly past the tow hooks. So what I recommend instead for your F-250 is a front hitch from Draw-Tite:
- Draw-Tite Front Mount Trailer Hitch Receiver # 65049
I have added a photo for you below of the Draw-Tite # 65049 installed on an F-250 so you can see that it does not protrude past the front of the truck whatsoever.
Since you mentioned... view full answer...
Hey Brad,
The comment was referring to the Air Distribution Box w/ Wall-Mounted Thermostat # ACRG15, which has a wall-mounted thermostat instead of the manual-control thermostat # ACDB he originally had. If you were referring to a remote control style thermostat then then unfortunately isn't one at this time. view full answer...
Hey Carrey,
We can get you a great 5th wheel hitch for your 2023 Ford F-250 Super Duty with the standard/short 6'8" bed. Since you have a short bed a sliding hitch is what you'll need, and my favorite option that fits your standard bed rails is from Curt:
- Curt A20 5th Wheel Trailer Hitch w/ S20 Slider # C55DR
I really like the A20 # C55DR because it gives you a steadier, more fluid ride than other 5th wheel hitches, and is among the easiest 5th wheel hitches to use. It uses an interlocking... view full answer...
Yes, we do. What you are describing sounds like the Inner Frame Brackets for Under-Bed Rail and Installation Kit for Reese Elite Series 5th Wheel Hitch item # RP27FR. I have attached a picture below. These come welded to the frame exactly where you described.
With these already on your 2017 F-250, I highly recommend installing the Reese Under-Bed Gooseneck Trailer Hitch item # RP39FR. This will not only give you a gooseneck hitch but also the factory puck system that Ford installs as... view full answer...
There will be four circles in the bed of your F-250 in a square pattern centered around the axle. They'll be about the diameter of the top of a tall beer can.
I saw you were looking at the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit item # BW73FR. If there is one center square shaped receiver this is what you have.
If you have the OEM puck system you can use the B&W Companion OEM 5th-Wheel Hitch item # BWRVK3300 if you have the long bed or a rotating... view full answer...
Hey Cameron, yes the B and W Turnoverball gooseneck part # BWGNRK1116 is compatible with the Air Lift 7500 kit part # AL57577 that you have installed on your 2019 Ford F-250. view full answer...
Hey Robert, sorry it can be a bit confusing navigating all those facets for the camper tie downs, but I did go ahead and find those tie downs you were looking for.
For the front, you'll want the TorkLift Camper Tie-Downs # TL87CR (TorkLift P/N F2032), and for the rear you'll want the TorkLift Camper Tie-Downs # TLF3008 (TorkLift P/N F3008).
In addition to the tie downs, you're also going to need a set of turnbuckles # TLS9529-2-LK to secure your camper to the vehicle. view full answer...
Hi there Joyce. Thanks for the question and it's pretty easy to get key 311 for your Fastway coupler locks. All you have to do is order the following and you're set:
- Replacement Tube Keys for Fastway Universal Coupler Lock - Key 311 # FA-KEY-311
This will get you two keys which is nice as you can keep one for a spare. view full answer...
Hey Clint, you are going to be installing the rail kit on the truck as well, correct? The Demco Recon 5th Wheel Trailer Hitch # DM47YV by itself should take only about 30 mins to assemble and install. The Installation Rail Kit # DM8551000 will also need to be installed on the truck. For the Installation Rail Kit, we estimate about 4.5 hours for installation. So, for the hitch and rail kit you would be looking at around 5 hours.
You will find our install video linked below. view full answer...
Hey Ron, thanks for reaching out!
The Putco Classic Chrome Decorative Pillar Posts # P402678FD are for an F-150 so we will get that updated.
For your 2024 Ford F-250 Super Duty you'll want to go with the Putco Classic Chrome Decorative Pillar Posts # P402678 instead. This doesn't have the etching, but it does have the key pad cutout for you. It looks like that etching is just something Putco offers for the F-150 trucks for whatever reason. view full answer...
You can transfer the Thule TracRac SR # TH43003XT-010 from your 2003 to your new 2024 F-250. The base rails you need to move the rack to your 2024 are the Base Rails for Thule TracRac SR Sliding Truck Bed Ladder Racks # TH21000. These come with all of the necessary hardware for installation. view full answer...
Hi Larry,
Yes, Voyager has a Universal Monitor Mount that's 4" tall # VOSHD4MNT and 6" tall # VOSHD6MNT. These would screw into the back of the monitor and the base could either be screwed down to the dash or you could use some double-sided 3M tape to secure it. view full answer...
The Adapter Rails # C88KR will give you a set of industry standard rail openings after securing it in the bed of your 2019 Ford F-250 Super Duty with the factory in bed prep package. As long as your Draw Tite 15K sliding 5th wheel will fit the ISR rails which I have included an image with the pin dimensions below you should not have any issues. Do understand some sliding 5th wheels like the B&W Patriot do not fit due to the way the hitch fits on the rails. view full answer...
We currently have three versions of the Demco 32 degree A-Frame coupler but none of them are zinc plated. We have the part # DM15633-97 which is primered, the part # DM15633-81 which is powder coated black, and we have the part # DM15633-52 which is silver powder coated. view full answer...
The pricing algorithm can be messed up from time to time but I do know that things like availability, supply and demand, and what other places are pricing it as well have an effect on this.
I'll send in a message to our pricing team to look at this but I'd say try to take advantage of the bearing and race kit while it's still priced this way. view full answer...
Hey Michael, the Grand Design Reflection 100 series 27BH that you are interested in has a Lippert 1621 style pin box so the Goose Box you would want is the part # RP94716 which was designed to fit it. The part # RP94716-61301 is same Goose Box but it comes with spacers to fit a wider application so it would technically still work but you wouldn't need the spacers it comes with.
This will work great with the 5 inch offset hitch ball part # GY43XR that fits the OEM pucks of your 2024 Ford... view full answer...
Hey Michael, so for your 2024 Ford F-250 SumoSprings does have a Rebel with a lower weight capacity at 3,000 lbs with the part # SSR-129-40-2. This would do a great job of giving you the additional support you are wanting without making the ride so stiff that it becomes uncomfortable when unloaded. view full answer...
Go To Results