Hey Karl, so as long as your current wheel bolt pattern is 8 on 6-1/2 inch you can mount a 17.5 inch wheel and tire like the Westlake 215/75R17.5 part # LHAS701. The width and diameter of this size is going to be right at the same as your 16 inch setup so you'd have clearance as-is.
You wouldn't need to upgrade your current hardwdare. view full answer...
We do have the Replacement Lock Assembly with Keys for RetraxPRO Tonneau Covers item # RTX25QR that may fix your problem. If you could pull a model number off of your cover I would be able to confirm if this is the correct replacement part for your truck's cover. It fits all manual RetraxPRO MX and RetraxPRO XR tonneau covers. view full answer...
Hi Robert,
If you're just wanting to replace the condenser unit on the rooftop and retain use of your current air distribution box and thermostat then you'll just need to determine what style connector your current unit has. If you remove the cover to the air distribution box and look up you should see a wire harness that hangs down from the condenser and plugs into the controller. It will have either a 6-pin or 9-pin connector (pictured below).
If you have a 6-pin connector then you'll... view full answer...