The correct camper tie-downs for your 2023 F-350 DRW are the TorkLift Camper Tie-Downs - Front # TL87CR and TorkLift Camper Tie-Downs - Rear # TLF3008. view full answer...
The correct camper tie-downs for your 2023 F-350 DRW are the TorkLift Camper Tie-Downs - Front # TL87CR and TorkLift Camper Tie-Downs - Rear # TLF3008 view full answer...
That's a great question Mike and I have an interesting answer. There actually isn't any specific weight capacity for the HappiJac Truck-Mounted Camper Tie-Downs item # LC182910-182971.
These are designed to handle the weight of any truck bed camper, and that's true of any camper tie-down, which is why there isn't a designated weight rating. If a camper can fit inside the bed of your F-350, the HappiJac tie-downs will safely hold it in place.
The only other thing you will need with these... view full answer...
Hey Robert, sorry it can be a bit confusing navigating all those facets for the camper tie downs, but I did go ahead and find those tie downs you were looking for.
For the front, you'll want the TorkLift Camper Tie-Downs # TL87CR (TorkLift P/N F2032), and for the rear you'll want the TorkLift Camper Tie-Downs # TLF3008 (TorkLift P/N F3008).
In addition to the tie downs, you're also going to need a set of turnbuckles # TLS9529-2-LK to secure your camper to the vehicle. view full answer...
The biggest difference between the TorkLift Camper Tie-Downs # TL84FR, # TL44FR & the TorkLift Talon Camper Tie-Downs # TL73QR & # TL44XR is that the Talon's are made of Aluminum which is going to be approximately 30-50% lighter than the traditional steel tie downs.
Other than that, they are the exact same and will do the same job. The other caveat is the aluminum Talon tie downs are also going to quite a bit more expensive.
With either choice you are also going to need a set of turnbuckles... view full answer...
The correct tie-downs for your 2019 Ram 3500 Tradesman short bed depend on your hitch. You can choose from the following:
With a factory installed hitch or non-Torklift aftermarket hitch
-TorkLift Talon Camper Tie-Downs # TL52XR (front) and # TL34FR (rear)
or
-TorkLift Camper Tie-Downs # TLD2141 (front) and # TLD3112 (rear)
With a TorkLift SuperHitch Magnum 30K
-TorkLift Camper Tie-Downs # TLD2141 (front) and # TLR3510 (rear)
Keep in mind, none of these will fit if you have the aftermarket... view full answer...
Hi Mark, thanks for the question and yes, the Brophy Slide In Camper Tie-Downs # HSAB for your 2024 Ram 3500 are sturdy enough for your Lance 825 slide-in camper.
These will work so long as you do not have the RamBoxes in your truck, and while the tie-downs themselves don't have a weight capacity, the necessary turnbuckles do - the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs # TDHP.
The # TDHP have a 3,000 lb capacity which is plenty for your Lance 825 from the specs I was... view full answer...
Since you have running boards that run all the way to the rear, the only cusotm tie downs available for your 2021 GMC Sierra 1500 are for the rear using the TorkLift Camper Tie-Downs - Custom Frame Mount # TL54FR.
To properly install your pop up camper in your truck you're going to need all 4 tie downs, so the only way you'd be able to do that is if you used # HSSF which is an in bed tie down. view full answer...
Hey James,
The correct rear camper tie-downs to go along with your new TorkLift SuperHitch Original Trailer Hitch Receiver # TLD1102 are going to be part # TLR3505. These will mount directly to the hitch at the end of the crosstube. view full answer...
Hey Randall,
For a 1988 Ford F-250 you'll need the TorkLift Camper Tie-Downs - Front # TLF2000 and Rear # TLR3501. To secure your camper to the tie-downs you can use the TorkLift AnchorGuard Derringer Turnbuckles # TLS9020. view full answer...
Hello Jerry, I am sorry to say that we do not offer any custom fitted camper tie downs for a 2024 Nissan Titan XD. We carry both the Torklift and Happijack brand tie downs and neither of these manufacturers make anything for this vehicle. It may be possible to use some universal no-drill bed-mounted tie downs like the Brophy # HSSF, but we have not tested for fitment so we cannot confirm that they will work. I have linked the review video and installation instructions below if you want... view full answer...
Hello Kelby,
There was a lot of information missing from what your truck has so I'm just going to go with the most common and assume you have a 2008 Chevy Silverado 2500 or 3500 Regular Cab with an 8 foot bed, factory hitch, and no steps underneath the truck bed. If all of that is true, the following tie-downs fit:
- Rear: TorkLift Camper Tie-Downs # TLC3209
- Front: TorkLift Camper Tie-Downs # TLC2204
If your truck is different please leave a comment below with the model, bed size,... view full answer...
The TorkLift Camper Tie-Downs Front # TLC2224 and Rear # TLC3220 are what you will need for your 2024 GMC Sierra 1500 Denali short bed diesel.
I recommend using the TorkLift Locking FastGun Turnbuckles # TLS9529-2-LK to secure your slide in camper to the tie-downs. These are stainless steel to resist corrosion from the elements and include locks. view full answer...
Yes, the Brophy D-Ring Tie Down Anchors # DR01 will work with the Torklift FastGun Turnbuckles # TLS9529-2-LK. Generally, these kinds of D-Rings are not used as a tie down point for a camper, but if they are properly secured using the Backing Plate # BP1D, I see no reason why these could not be used for this purpose. I am not sure exactly what kind of camper you are securing but having four 2,000 lb capacity D-rings should be more than enough for most any truck camper. view full answer...
Because you are using the TorkLift Front # TLD2140 and Rear # TLD3113 frame mounted Tie-Downs you are going to want to use their Turnbuckles # TLS9529-2-LK. This is due to the length of them as the Happy Jack # LC182898 have shorter turnbuckles due to them using a bed mounted front anchor. The TorkLift Turnbuckles # TLS9529-2-LK come with locks as well to protect your investment. view full answer...
No, due to changes over the years a 2023 Ford F-350 with an 8' bed and running boards that end at the cab or no running boards would require the TorkLift Camper Tie-Downs - Front # TL87CR and Rear # TLF3008. If you want the aluminum versions then you'd need part # TL36CR and # TLF3008A.
If you're in need of new turnbuckles then I recommend the TorkLift AnchorGuard Derringer Turnbuckles for Truck Camper Tie-Downs # TLS9020. view full answer...
Hey John, it can be a bit tricky to find these on our website sometimes but I was able to locate them for you. So, for the front you're going to want the TorkLift Camper Tie-Downs # TL87CR (F2032), and for the rear you're going to want the TorkLift Camper Tie-Downs # TLF3008 (F3008).
Finally, to actually secure your camper to your truck you're going to need a set of turnbuckles # TLS9529-2-LK. view full answer...
Hey Brian, so according to TorkLift they don't have any tie downs for the front but for the rear you are going to want the TorkLift Camper Tie-Downs # TL54FR.
Since your truck has factory running boards that extend under the bed, there aren't going to be any front tie downs available. view full answer...
The Brophy Slide In Camper Tie-Downs # HSAB are a universal application, and while I believe the rear part of your 2001 Dodge Ram 3500 dually will be too wide for them to fit, I'm attaching a photo of the dimensions so you can confirm this on your end.
If these won't fit your truck then I recommend using the HappiJac Camper Tie-Downs # LC182910-182971 instead because they are still more on the cost-effective side of things when compared to the TorkLift alternatives. view full answer...
Go To Results