Expert Answers about Chevrolet Traverse

• Recommended Weld-On Replacement For An Atwood 82541 Surge Brake Actuator
• Hi Doug, If the tongue really is C-Channel and not a box the you'd likely need to first weld a piece of metal to fill in the gap on the open end for the new actuator to weld onto. You could go with an actuator like the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout # DX63FR. You'd weld this to the top of the channel, but there aren't welding instructions included. This actuator has a 7,500lb capacity, fits a 2" hitch ball, and comes with an electric reverse lockout solenoid so...
  view full answer...


• Correct Lift Kit for 2023 Airstream Flying Cloud 27FB
• Thank you for providing that picture. Since you have a #11 Torflex the correct lift kit is the # K71-724-02 you were looking at. If you were worried about the listed 4,100-6,000 lb capacity that isn't something to get too caught up in. The distance between the mounting bolt holes is what really matters and that is determined by the axle number. The #11 has 9-1/2" between the mounting bolt holes on center which is what this kit is designed for. The # K71-707-01 which is designed for #10...
  view full answer...


• Recommended Complete Flat Towing Setup for a 2023 Chevrolet Traverse W/ Lower Active Shutters
• Hey Marty, you can't go wrong with either and they basically do the exact same thing, so if it were up to me I'd go with the Demco Air Force One # SM99243. They (Demco) have a pretty good track record with this system, and a lot of people have used this and been very satisfied with it. Alright with that out of the way, you're still going to need: -A base plate kit ; Since you have active shutters your only option is the Blue Ox Base Plate Kit # BLU63CR, not a bad choice by any means and...
  view full answer...


• What Truck Bike Rack Will Fit The 2022 Chevy Traverse?
• Hello Clint. We actually have several trunk bike rack options that will fit the 2022 Chevy Traverse. My recommendation is the Yakima Fullback which is available in a 2 bike # Y02634 and a 3 bike # Y02633 version. I like this rack because it is durable and easy to adjust. The anti-sway cradles keep your bikes secure during transport. It has a built in cable lock for additional security. The Yakima racks also come with a lifetime warranty.
  view full answer...


• What Bearing Buddy Fits 2021 Karavan Move Trailer
• Hey Patrick, you'll want to measure the bore of your hub where the grease cap fits to find out what Bearing Buddy you need. Most likely you need the part # BB1980A-SS based on previous customers we've helped though.
  view full answer...


• Installing A Roadmaster Disconnect Switch On A 2023 Chevy Traverse
• Hi Eric, The closest we'd have to what your 2023 Chevy Traverse most likely has is on a 2023 Trailblazer. I'm assuming you're talking about the plate that has each wire running to it separately and then it connects to the post on the battery. Ryan starts working on this at the 8:43 minute mark of the video below. If you want to send in some pictures I'd be happy to take a look and see if there's an easier way to install the Roadmaster Battery Disconnect Switch # RM-766.
  view full answer...


• What Is The Ball Diameter Of The Curt Towing Starter Kit for 2" Hitches # C45534
• Hey Caesar, The Curt Towing Starter Kit for 2" Hitches # C45534 has a 2" diameter ball for connecting to a 2" trailer coupler. If you're needing a specific sizing just let me know and I'd be happy to help.
  view full answer...


• 4-Way that Fits 2013 Chevy Traverse without Tow Package
• Hey Stephen, yes the Curt trailer wiring harness part # C56245 does fit your 2013 Chevy Traverse. If you don't have trailer wiring currently this would be the correct kit to provide you with a 4-way.
  view full answer...