Michael, for your 2020 Kia Sportage I'd recommend going with the etrailer Trailer Hitch Receiver # e72TR. This hitch has a 3,500 lbs weight capacity, a 2" receiver so it'll be compatible with just about any hitch accessory, and is made in the USA. view full answer...
Hey Steve, on the American Flag Trailer Hitch Cover # AUT-FLAG-C the distance from the face of the hitch cover to the furthest hole is 3 inches. view full answer...
The Draw-Tite Class 3 Round Tube Trailer Hitch # 76128 you're looking at is actually not intended for the Hybrid models, so I can't confirm if it'll work with the kick sensor, but I can say that we have had a customer use the etrailer Trailer Hitch Receiver # e98848 and says the kick sensor works without an issue.
This one has a bit lower weight ratings (525 lb tongue weight, 3,500 lb GTW), has a bolt on install just like the hitch you were originally looking at, and is made in the USA. view full answer...
I recommend the Equal-i-zer Weight Distribution System # EQ37140ET for towing your Rockwood 8263MBR. This hitch system is rated for a trailer up to 14,000lbs with a tongue weight of 1,000-1,400lbs. I am not a fan of the B&W Continuum # BW78FR as it does not have any active sway control. Instead they rely on leveling the ride to solve sway. The Equal-i-zer uses the spring bars riding on the trailer frame brackets to create friction from side to side movement. While this will make some noise... view full answer...
I checked with the manufacturer and Curt trailer hitch balls, like item # C36BR you were looking at, are made of steel and then chrome plated.
This hitch ball is designed to work with the Curt Friction Sway Control for Weight Distribution Systems item # 17200. view full answer...
You can not, jonathon. The Dexter DX7.5L A-60XL Brake Actuator w Electric Lockout # DX43FR is designed to be used only with hydraulic disc brakes, so for drum brakes you'd need to use the Dexter DX7.5 Drop-N-Go Brake Actuator # 099-175-00.
This actuator has the same 7.5K weight capacity, will work with 2" hitch balls, and is made in the USA. view full answer...
Hey Jerry, it looks like you have the MORryde Cshioned 5th Wheel Pin Box for Up to 11.5K Trailers w/ Lippert 1621 and 1621HD # MR64VR which you can use the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box # GY38FR to replace your current pin box.
This is a Gooseneck pin box has a 30k capacity, a pin weight capacity range of 2,000 to 4,500 lbs and is made in the USA. view full answer...