Hey John,
For a 2001 Ford F-250 With a B&W Turnoverball hitch you would need the Firestone Ride-Rite Air Helper Springs # F2550. The available Air Lift Kits for your F-250 are unfortunately incompatible with the B&W # BWGNRK1108 you have in the bed. These springs offer 5,000lbs of load leveling support for your suspension and can range from 5psi - 100psi.
If you'd like to monitor or adjust the psi levels while on the go then I recommend picking up the Air Lift WirelessONE Compressor... view full answer...
Hey Chris,
The Air Lift 1000 Air Helper Springs for Coil Springs # AL80532 will stiffen up your coil springs and help with the road shock you've been experiencing, but I'd go one step further with a front jounce spring. Adding in the SumoSprings Solo Custom Helper Springs # SSF-302-47 will help cushion the suspension and provide load lifting support with no maintenance.
With how rough the roads are and with the amount of travel you'd definitely benefit from a front jounce spring to... view full answer...
Hey Scott; there are 7,500 lb air bags that fit your 2011 Ford F-250 Super Duty 2WD, though the # AL57596 are for the 4WD model. There aren't actually 7,500 lb Air Lift air bags that fit the 2WD model (I checked directly with Air Lift), but there are from Firestone:
- Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs # F2703
The # F2703 have the 7,500 lb capacity and fit your 2WD F-250, but I don't think your application needs them, in all honesty. Those are more for trucks... view full answer...
Hi Adam,
SumoSprings will not affect your unloaded ride height, but are designed to help support your suspension when loaded so that you maintain your factory unloaded ride height. The colors dictate the weight capacity of the spring so black ones # SSR-610-47 would have a 1,500lb capacity which is around the max payload of a 2020 Tundra. These are made for a stock suspension, if you have a suspension lift then let me know and I can help find the correct spacer kit to make it fit. view full answer...
Air bags like the # AL88250 are designed to fit a suspension at stock height. These and similar air bags will not fit on your lowered 2006 Silverado 1500HD. The best way to get extra support on your truck would be to install the SumoSprings Solo Custom Helper Springs # SSR-211-47. However, they may engage too quickly or immediately with the lowering shackles so you might have to trim the bottom to get the ideal 1/2" gap between the SumoSprings and the point of contact. view full answer...
Hi Cole,
There are a couple options for air bags for your 2024 Ford F-150 4WD with the EcoBoost engine, it just depends on if your truck is equipped with Continuously Controlled Damping (CCD) or the optional Onboard Scales. I didn't see an option for an F-150 Sport model so I can't tell you if your model has the option for Damping. So here is what you'd use, depending on your set up:
- WITHOUT Scales or CCD: Air Lift LoadLifter 5000 Air Helper Springs # AL47PD
- WITH Scales or CCD: Firestone... view full answer...
We actually only have one jack that fits all of those requirements. That is the Round A-Frame Trailer Jack # TJA-5000S-B. This is a sidewind jack with a lift capacity of 3,000 lbs and support capacity of 5,000 lbs. I wouldn't expect the jack to fail as long as you're using it as intended. If you are on enough of a slope and all of the weight of your trailer shifts to the jack you will likely have a problem. Make sure to use wheel chocks like # 288-02011-2 and leveling blocks like # A10-0920... view full answer...
From what I understand, not all of the Toyota's have the coil spring suspension, so the Hellwig # HE49FR would still work in those applications. But since your Tundra has coil springs, I'd recommend just swapping out your Timbrens with a heavier duty spring like the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers # AL24JQ.
These springs have a 5,000 lb load leveling capacity, an adjustable air pressure range of 5 to 100 PSI, and are made in the USA. view full answer...
Go To Results