The BOLT Trailer Hitch Receiver Lock # BLT99FR is the same as part number 7040474 and is designed for Ford's center cut key so you shouldn't have an issue with it working. We also have a review from a 2024 F-350 owner stating it works and both year models have the same key fob. view full answer...
Yes, it will so long as your Ford key looks like one in the picture below. The Replacement Lock Cylinder for BOLT Toolbox Latch item # BLT79FR only works with Bolt tool boxes. view full answer...
The BOLT Trailer Hitch Receiver Lock # BLT99FR is rated for a gross trailer weight of 16,000 lbs and a tongue weight of 1,600 lbs. If you are needing something with a higher capacity check out the InfiniteRule Hitch Lock # 34061074-D. This will also fit up to a 3" Ford receiver and has a stainless steel construction. It has a sheer strength rating of 42,000lbs. view full answer...
Hey Joseph, so the Bolt Lock part # BL7023582 that you referenced is listed as a fit for your 2018 GMC Sierra 3500 but I am not totally sure what key type you are describing so I attached a picture of what types of keys this is compatible with. view full answer...
Serge, there actually is not a coupler lock that will work with the Demco Slide-Lok Trailer Coupler # D05557-95. This already has a lock built in so you really wouldn't need one. But, you are going to need the Buyers Products Heavy Duty Channel Bolt and Nut Kit # 337B9021 to actually install it to the channel. view full answer...
Hey Chuck, thanks for reaching out again!
The Locking Plate # DM77GV is only for 2020 and newer 5th Airborne pin boxes. If yours is older than that, the Locking Plate # DM6026 is the correct fit. As long as the king pin hole and bolt holes are lining up and you're able to torque everything down correctly, a small gap as the front is okay. view full answer...
Hey Chris,
The Yakima RuggedLine HD Mounting System for LockNLoad Platform # Y43DJ is not compatible with a 2021 Toyota Highlander unfortunately. If you have flush mounted rails that run from front to back then you could go with the following components for a Rhino-Rack Platform roof rack instead:
Rhino-Rack Pioneer Platform Roof Tray # RR66AP
RCH Legs for Rhino-Rack Crossbars and Pioneer Platforms # RRRCH4
Custom RCP Fit Kit for 4 Rhino-Rack RC and RV Series Roof Rack Legs # RR66QT view full answer...
Hey Tracy,
I can help you out here, and while we do have a cargo box for the factory roof rack on your 2012 Subaru Forester, the box you mentioned is only for very specific crossbar spreads so won't work. Instead, what I verified will work is a box from Yakima:
- Yakima RocketBox Pro 14 Rooftop Cargo Box # Y07192
The RocketBox Pro 14 # Y07192 does not require any type of extra hardware, and is really easy to use. It uses clamps that you tighten with hand knobs to secure to your crossbars... view full answer...