Hey Joel, to answer your first question I'm not entirely sure what you can do temporarily considering that the key that fits into the Dexter Trailer Breakaway Kit # 34-285 uses a special shape that wouldn't be easily replaceable.
I'd just recommend waiting until you get the Replacement Breakaway Switch with Cable and Pin for Dexter Trailer Breakaway Kit # K71-691 before towing your trailer again.
Also, since the delivery times can change I'd recommend just checking what on the product... view full answer...
Hi Eric,
I checked with our manufacturers and the Curt trailer connector is not a fit for the 2023 Chevy Bolt EV. They don't have any wiring for this vehicle, so the only option is with a splice-in kit from Tekonsha, the Tekonsha Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit # 119147KIT. view full answer...
Your 2020 Grand Design Imagine 2450RL has a 3,500 lb Dexter axle. This means the # BK2-100 is the correct bearing kit for your trailer. view full answer...
There unfortunately isn't a custom-fit base rail kit for your 2019 Ford F-350 that would fit with a flatbed. For flatbed trucks we typically recommend having a qualified fabricator weld in a Turnoverball Hitch # BWGNRK1500, which could would then allow for the B&W Companion Flatbed Hitch # BWRVK3050 to mount. This would allow you to tow a 5th wheel trailer as well as a gooseneck trailer with the provided hitch ball in the # BWGNRK1500 kit. view full answer...
Hey Karl, you are correct with your line of thinking.
The Over-Under Conversion Kits like part # K71-384-00 for a 2-3/8" diameter axle is normally my go-to for increasing trailer height when the axle is above the leaf springs, but since you have a 4" drop axle the lower part of the axle will still be hanging pretty low.
By changing to a standard axle like the 3.5K Dexter Axle # 7359765 you were looking at will naturally life your trailer 4" as well as increase the clearance for your axles... view full answer...
Yes, the Dexter Heavy Duty Suspension Upgrade Kit # K71-358-00 will fit your single axle trailer with a 2,500lb axle. This kit is a standard universal size which is designed for double eye springs. We do have it listed for 3,500lb-7,000lb axles but it will still work on lighter axles. view full answer...
Hey Frank, yes the Roadactive Suspension Kits like the part # RAS3611-HD that fits your 2005 Chevy Silverado 2500 do provide additional suspension support to the rear leaf springs so it will do a great job getting rid of the suspension sag you are experiencing when towing your trailer. view full answer...
If you're talking about the older discontinued Lippert lift kit that is similar to the Correct Track # RR23QX it is not compatible. However, you can use the Correct Track with the #MR33WR if you use the adapter # MR93WR. This lift kit allows you to raise the trailer 1-1/4" or 2-1/4" and aligns the axles. view full answer...
Since your 2024 GMC Terrain doesn't have the factory tow package the only way to install trailer wiring will be with a universal style kit like the Curt # C59236 which does require splicing into the taillight harness of the vehicle. There isn't a no-splice kit that fits your vehicle configuration. view full answer...
Hello Erik, it certainly is possible to convert your trailer from surge brakes over to electric-over-hydraulic (EOH) brakes. Basically, all you will need to add is an EOH disc brake actuator # HBA16 and a wiring kit # HS381-9000. The wiring kit contains everything you need to install and wire in the actuator, including a junction box for your connections. You will simply attach the brake line from your surge coupler to the Hydrastar actuator.
As long as the current surge actuator is still... view full answer...
Hello Erik, it certainly is possible to convert your trailer from surge brakes over to electric-over-hydraulic (EOH) brakes. Basically, all you will need to add is an EOH disc brake actuator # HBA16 and a wiring kit # HS381-9000. The wiring kit contains everything you need to install and wire in the actuator, including a junction box for your connections. You will simply attach the brake line from your surge coupler to the Hydrastar actuator.
As long as the current surge actuator is still... view full answer...
Hi Doug,
The Easy Grease Trailer Idler Hub Assembly for 2K Axles # AKIHUB-440-2-EZ-1K uses a lithium complex grease so in this case the # L11390 would be compatible because they both share the same base. As long as the bases of the grease are the same they won't separate and breakdown. view full answer...
The Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit # 391SUOB20T should have a snug fit as the stainless steel block the hitch is inserted into was designed to not deteriorate over time. Be sure to look at the Ball Mount # 391BMU3S as if all the paint over the part has come off this would create a slight gap and cause some of the noise. You could recoat it to remove some of the play. Also be sure to check the bolts holding the block to the receiver as this would likely be a... view full answer...
Hi Oleg,
For a 2024 Hyundai Kona Limited you would need the Curt Trailer Hitch Receiver # C39RV. If you plan on towing a trailer then you'll want to pick up the Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit # C59496 as well to transfer you light signals to the trailer. view full answer...
Yes Doug, the Reese Quick-Install Custom Outboard Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches # RP56018-53 will fit your 2024 Ram 1500 Rebel with the 5.7L engine.
These rails will work with all of the engine variants of the 2024 Ram 1500 so they'll work fine with your 5.7. view full answer...
The Andersen Ultimate Connection 5th Wheel Trailer Hitch # AM3200 is compatible with industry standard rails. For a set of ISR rails for your 2020 Ford F-150 you can use the Curt Custom Fifth Wheel Installation Kit # C38ZV. This comes with custom fit brackets that mount to the existing holes in your frame so no drilling is required. view full answer...
Yes, since you have the Under-Bed Rail and Installation Kit for Reese Elite Series 5th Wheel Trailer Hitches # RP30868 installed on your 2019 Silverado the # RP58419 is what you need to adapter it to the rails. This will convert the feet to the Elite style so it will fit. view full answer...
Hi Steve,
The wedge kit is designed to prevent the king pin from rotating inside of the jaws to force the pivot point back to the turret of the Sidewinder for additional turning clearance. Most rotating pin boxes will come with a generic rectangular-shaped wedge kit to fit the variety of hitches on the market but there are specific fit wedge kits designed to spread this force out more evenly across the funnel of the hitch head. The wedge handle should only need to be adjusted on the initial... view full answer...