The Wiring Adapter # 3035-P will allow you to simply plug in the Tekonsha Prodigy P2 # 90885 on a 2010 Ford Expedition that came with either a factory 4-way or 7-way. If the truck does not have any of the factory wiring the controller will have to be hard wired in with the Wiring Kit # ETBC7 and a 4-Way # 18252. view full answer...
Hey Andrew,
You are correct, a 7-way round does not use combined turn signals and brake signals, they use a dedicated brake signal wire. You can use a 3 to 2 converter # RM-732 to combine your three wire system to a 2 wire system that a standard RV 7-way connector needs. view full answer...
The Dexter Trailer Hub and Drum Assembly # DX68QR is for a single hub. These are not sold as pairs as they do not always have to be replaced as a set.
We do offer the brakes for this either as a Set # 23-438-439 or the Left # 23-438 and Right # 23-439 separately. view full answer...
Hey John we do have a potential axle option for you. We have axles with the 86.5" hub face, such as the Trailer Axle Beam # e33GR, which is rated for 6,000. This axle has spring seats at 71-1/2", and they are underslung. We are not able to weld on spring seats for you here, but we can sell you a few loose spring seats # TRSS300. You would just have to have them welded to the top of the axle tube in your desired location.
This axle is also available in a 5,200 lb capacity # e45GR if that... view full answer...
Thanks for the picture and your patience! I just heard back from Dexter and your D20 axle uses the same inner and outer bearing of 1.063" which is item # L44649. I recommend the Trailer Idler Hub Assembly for 2K Axles item # AKIHUB-545-2-LF-2K or item # AKIHUB-545-2-LFEZ-2K if you have an EZ lube axle. Both of these idler hubs are sold individually and have a 5 on 4-1/2 lug pattern. view full answer...