I spoke with Lippert, and they said since you have a 1995 step, you are going to need to order the Motor Upgrade Kit for Kwikee Electric RV Steps # LC29VR, which includes a new motor, controller, and door switch.
This is because around 2006 Kwikee changed/updated their electronics on these steps, so the old parts are now obsolete.
They also did mention that you can also purchase a new set of steps If you'd rather do that instead.
Additionally, you can absolutely install an air ride... view full answer...
The Namsco Wheel Liners # NA7195D0 fit the front and rear dually wheels on your 1994 Oshkosh X-Line and they mount as shown in the linked diagram. Lug nut covers are included but not the actual lug nuts; you'll use yours.
The rear dual liners are held in place by some of your lug nuts and the hub covers are held by the others. Once you have tightened all the lug nuts to spec to secure the liners and hub covers, you'll apply the included lug nut covers.
For valve extenders that mount on... view full answer...
The combined height of the Timbren Rear Suspension Enhancement System item # TOSHRV for your 1994 Oshkosh X-Line is 6 3/8". The spring height is 4 3/4" and the bracket height is 1 5/8". The system has a max compression of 2 1/4". Timbren also recommends a 1/2" to 1-1/2" of clearance between the axle and frame after the timbren is installed, so the ideal space between the top of the axle and the bottom of the frame should be 7"-8". view full answer...
We do not have a steering stabilizer available for the 1993 Oshkosh X-Line but we can help with suspension enhancements such as the Timbren Front Suspension Enhancement System, # TOSHFV and Timbren Rear Suspension Enhancement System, # TOSHRV. These hollow rubber springs help to stabilize and level your Oshkosh X-Line by absorbing road shock and improving roll stability. On the rear of the vehicle, the rubber springs will set on top of the axle to provide additional support. This added... view full answer...
Go To Results