Expert Answers about Chevrolet Volt

• Getting Holes To Line Up When Installing Trailer Hitch On 2017 Chevrolet Volt
• When a trailer hitch is installed on a vehicle and you find that the holes are sometimes not perfectly lined up and the hitch needs to be adjusted to get everything to fit. Our installers will use a small tool that they insert in the mounting hole on the hitch and in the mating hole of the vehicle frame and move the hitch so that bolts can be inserted. Some are tougher than others. This is a common practice and should cause you no issues with the performance of the trailer hitch as long...
  view full answer...


• Why Isn't the Tightening Knob Activating on My Thule T2 Pro XTR Bike Rack?
• I went ahead and reached out to Thule, and my tech said that the most common issue with the knob/wedge of the T2 Pro XTR # TH23JV or # TH83JV involves the lock. One thing that you can do is make sure that the tightening knob is in the "unlocked" position. If it is in the "locked" position, this will not allow the wedge to tighten. If this troubleshooting method does not work, you need to fill out a warranty claim with Thule or replace the entire rack. There is unfortunately no replacement...
  view full answer...


• Troubleshooting Tekonsha Voyager Brake Controller Installation
• Assuming your brake controller was correctly installed from the get-go, you should show a constant 12-volts on the pin in the 1:00 position and voltage on the brake output pin in the 5:00 position only when the manual override on the brake controller is actuated. If your vehicle has the tow package, and the controller has been plugged in to a connector under the dash. If you're not showing a constant 12-volts on the 1:00 connector pin, you might have a missing or blown fuse. On some vehicles,...
  view full answer...