bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Chevrolet Van


  • Will Roadmaster Reflex Steering Stabilizer # RM-RBK1-RSSC Fit 1988 Chevy G30 Chassis
  • Yes, the Roadmaster Reflex Steering Stabilizer # RM-RBK1-RSSC that you referenced is a confirmed fit for your motorhome that's built on the 1988 Chevy G30 chassis. Because of how our vehicle fit guide has to be organized it can be a little confusing when looking at the different labels but this will work perfectly for your RV. I have attached an installation video and the written instructions that you can check out as well.
    view full answer...

  • Converter/Panel for Enclosed Trailer to Charge Battery and Power AC Lights
  • There may have be a converter panel/charger that was installed in the trailer that was used to charge the battery and provide the power source for the AC lights etc. I'm surprised it was removed from the trailer but for a replacement you could use the # PD4135K. You'd run your 12 volt trailer wiring circuit to the panel which would connect to the trailer battery and it would get a charge when connected to your tow vehicle.
    view full answer...

  • Trailer Roof Vent with 12 Volt Fan for a 1977 Chevy G-20 Van
  • The Ventline vent # V2110SP-24 cannot be fitted with a fan but we do have a host of roof vents that do have fans built in that you could use. I have included a link to them for you. I would actually go with vent with fan # VP-543SP since it has a smaller footprint and would require a smaller hole in the roof. I also recommend the roof vent installation kit # 344270KITW.
    view full answer...

  • Sway Bar Recommendations for 1984 G30 Lazy Daze Motorhome Class C
  • For your 1984 G30 Lazy Daze motorhome the correct rear sway bar is the Roadmaster # RM-1109-121 and then for the front # RM-1109-131. The biggest improvement will be the rear bar. A front bar will help quite a bit too but the biggest improvement is always the rear bar since that's where most of the weight is.
    view full answer...

  • Correct Rear Anti-Sway Bar for a 1993 Rockwood Frontier Class C Motorhome
  • According to my research, your 1993 Rockwood Frontier Class C Motorhome is on a 1993 Chevrolet G30 Chassis. If this is the case then the correct rear anti-sway bar for you is the Roadmaster Rear Anti-Sway Bar for Motorhomes part # RM-1109-121. If you can provide me with the VIN of your motorhome I would be happy to confirm the above for you.
    view full answer...

  • Trailer Hitch and Wiring Recommendations for a 1995 Chevy Full-Size Cargo Van
  • Draw-Tite trailer hitch # 41121 fits the full size 1995 Chevy vans like yours and does not require drilling or trimming for installation. It does not fit models with a step bumper and based on your picture you do not have a step bumper so that is not a problem either. I have included a link to the instructions for you. If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4...
    view full answer...

  • Recommended Trailer Hitch for a 1968 Chevrolet Van
  • The best trailer hitch option we have for a 1968 Chevrolet Van is the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part # 41991-16. The reason that this is the best is because the width can be adjusted to fit a wide range of frames and the tall brackets allow you to clear the bumper and choose you receiver tube height. In regards to modifications, you will need to drill into the frame but this is going to be unavoidable to install a trailer hitch. The Curt Multi Fit Trailer...
    view full answer...

  • Dump Valve Recommendation for Fitting 3-1/2 inch and 1-1/2 inch Pipe on RV
  • So based on the picture you submitted and the dimensions you listed it looks like you need a dump valve that will fit into the 3-1/2 inch pipe (3 inch spigot) and then need a 1-1/2 inch pipe ot fit over your other valve (1-1/2 inch hub). The valve setup that covers that is the part # T18A as it has a 3 inch spigot and a 1-1/2 inch hub.
    view full answer...

  • Recommendations for Bright LED Flood Lights
  • You would want to look at LED utility lights. I have added a link to them for you to view. Or you might be interested in a set of LED docking lights, # DLL50CC. The light output of each light in kit # DLL50CC is 1000 candela. The literature for this set states 440 lumens per light, 880 combined.
    view full answer...

  • Tire Size Replacement Recommendation for a 215/75R15 on Trailer
  • 205/65R15 is not a standard trailer tire size so I wouldn't recommend that for use with a trailer. The tire size should start with the letters ST which stands for "special tire." The closest tire size to what you are looking at that would work well is the ST205/75-15 like part # TTWTRTM2057515C which would work well. This has a higher than normal speed rating for trailer tires as well at 81 mph instead of 65 mph. We don't have access to original equipment info for your trailer, but if...
    view full answer...

  • Can RV Curtain Carriers # 37281455 Work on Bestotal A115 for RV Curtains Clear Glide Tape #9
  • Yes, the RV Curtain Carriers # 37281455 could fit the snaps of the Bestotal A115 for RV Curtains Clear Glide Tape #9 or you could use them with the snap tape for RV curtains # 37281005.
    view full answer...

  • Transmission Cooler Recommendation for a 1985 Chevy G 30 Class C Motor Home with 5.7 Liter Engine
  • The most popular transmission cooler for the 1985 Chevy Van (G series) is # D13503 that you have referenced and it would be a good choice. Mounting it in front of the radiator is the second most efficient location, the most efficient being in front of the AC condenser core where it would get the most airflow whether the AC is working or not. I have included some links on transmission coolers showing a typical installation and more information in general. Given the size of your vehicle...
    view full answer...

  • Hitch Recommendation for a 1991 Chevy G30 Full Size Van
  • According to the research I did a G30 Chevy van is basically just a full sized van, so for your 1991 Chevy G30 van you would want the Draw Tite Hitch part # 41121 that you referenced as it has been confirmed to fit. If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with...
    view full answer...

  • Remote Engine Oil Cooler for a 1984 Chevy G30 Van Class C Motor Home
  • Provided you have space for cooler # D15604 you could certainly use it on your 1984 Chevy G-series van. The overall depth is 2 inches, width 13 inches, and height 4-9/16 inches. Or you could go with a remote cooler that has it own fan like # D15450. With this set up you are not limited to placing the cooler in the front of the vehicle. It could go anywhere there is space since it has its own fan. It is 4-5/16 inches deep, 12-3/4 inches wide, and 9-3/8 inches tall.
    view full answer...

  • Does Air Lift LoadLifter 5000 Come with Compressor
  • The Air Lift LoadLifter 5000 part # AL88105 that you referenced does not come with a compressor. Since not everyone ends up wanting a compressor we offer them separately. For a non-Bluetooth kit the Air Lift Compressor part # AL25854 would be a really great option. This puts a gauge up in the cab of your vehicle that allows you to control the pressure from and comes with a heavy duty compressor which will inflate the bags a little quicker.
    view full answer...

  • Can I Carry Both a Bike Rack and Cargo Carrier On The Receiver Of My 1994 Chevrolet Van?
  • I recommend the Gen-Y Phantom X Adjustable Ball Mount w/ Stacked Receivers for 2" Hitch # GY59VR. This will give you the ability to carry up to 700lbs of tongue weight and will spread out your Thule bike rack and a 60x24 etrailer Cargo Carrier # e98874. Be sure not to exceed the vehicle or receiver weight capacity on your 1994 Chevrolet Van. The etrailer Cargo Bag w/ Mounting Straps # 988501 will help to keep your cargo clean and dry while you travel. The Malone 2" Dual Purpose Hitch...
    view full answer...

  • Towing Mirror Recommendation for 1995 Chevy G20 Van
  • We do offer some universal-fit mirrors that could work for you, but not a custom slip-on style that would work with the mirrors you described. The # CM10000-2 mirrors you'd looked at will only fit the chrome mirrors, not the ones with the black plastic housing. The K-Source # KS3891-2 is what I'd recommend. This universal mirror fits factory mirrors that are 4-1/2 to 11-1/2 inches tall. What really sets this mirror apart is the sturdy ratcheting straps that hold the mirror tightly in place...
    view full answer...

  • Recommended Trailer Hitch Receiver for 1984 Chevy Travel Craft Motor Home
  • For your 1984 Chevy Travel Craft Motor Home, I recommend the Curt Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide # 13703. This trailer hitch receiver will bolt or weld-on to your frame and give you a hitch rated for 3500 lbs towing and 350 lbs tongue weight maximum. If you will be using a bike rack or cargo carrier, you will also need the support strap # 18050. I recommend looking at your owners manual for any manufacturer restrictions.
    view full answer...

  • Recommended Trailer Hitch for 1975 Chevy G20 Van
  • The best trailer hitch option we offer for a 1975 Chevrolet G20 Van is the Multi-Fit Trailer Hitch part # 5350 which fits frames between 24"-46". It will require drilling but there are no bolt-on options. It has a 5,000 lb weight capacity with 500 lb tongue weight rating. Please note, this is a general application product and it is the responsibility of the installer to select a structurally safe location for attachment.
    view full answer...

  • Recommended Suspension Enhancement For Front Of 1985 Chevrolet G30 Van
  • The Front Suspension Enhancement System that is designed to fit your 1985 G30 Van I recommend is part # TGMFG20. This system provides additional support and helps maintain stability when carrying heavy loads. No drilling is required for installation because this system is designed to replace the bump stops you currently have on your van.
    view full answer...