Replacement Modular Upright for TracRac TracONE Truck Bed Ladder Rack - Silver # 8523446001 that you were looking at is for TracRac TracOne models TA27000-01, TA27000-01-34, and TA27000-01-41500. There is a variation of this part in black # TA8523446002 which is made for TracRac TracOne models TA27000B, TA27000B-34, and TA27000B-41500. view full answer...
The Toyota Tacoma Adapter Kit for Thule Xsporter Pro Ladder Rack - 2005 to 2015 - Silver # THXK3 are the only compatible clamps for your 2008 Toyota Tacoma and Thule Xsporter Pro Adjustable Height Truck Bed Ladder Rack # TH500XT-XK3 and we offer them in a pack of 8 which includes 8 clamps, 8 bolts, and 8 clamp feet. view full answer...
I may have a solution for you, but there is not a cantilever attachment available for the Yakima Overhaul HD # Y01151-5868. There is a cantilever system on the Thule TracRac TracONE Ladder Rack w Cantilever and Toolbox Mounts for Toyota - Fixed Mount # TH27000XT-501EX, which is compatible with your 2020 Toyota Tacoma with the Deck Rail System. The cantilever system provides 32" of additional support over the cab of your truck to help support heavier loads and keep the truck cab from getting... view full answer...
For the 2017 Toyota Tacoma we have at this time only universal-fit towing mirrors without any electrical functions, all shown on the linked page. I also linked our main page for all accessories for your truck.
It is possible that in the future there will be custom-fit replacement towing mirrors with the functions you want but note that these functions only work if the vehicle has the necessary wiring already in place for its OEM mirrors. In other words, you cannot add a new function to... view full answer...
The highest rated trailer hitch we offer for the 1996 Toyota Tacoma is the Curt hitch part # 13013 which has a 5k capacity when not used with a weight distribution system but with a WD system it has a 6k capacity.
If you are unfamiliar with WD system you would need to check out the help article I attached that covers what they are and how they work.
For a system that would work great with your trailer loaded you would want the part # RP66083 that has a tongue weight range of 400-800 lbs... view full answer...
The Tekonsha brake controller wiring harness for the 2015 Toyota Tacoma is # 3040-P. I have linked a video showing an installation using this harness. Please note that the extra white ground wire in the harness does need to be attached to a clean metal surface to create an adequate ground for the brake controller. view full answer...
For your 2012 Toyota Tacoma that has the deck rail system I have a similar ladder rack that will fit your vehicle but the MaxxHaul MT70386 will not and there aren't any adapters that will let it happen.
Instead the Rola rack part # 59799 would be a great option since it's economically priced and would work well. view full answer...
We will only have a 2" ball with a 3" shank and no rise # C40020. Our 1" Rise # C40033 and 2" Rise # C40034 balls only have a 2-1/8" long shank. view full answer...
Cantilever Extension part # TH24002XT is offered for addition to the Trac Rac SR, T-Rac Pro 2 and TracONE ladder racks including the rack system you referenced, # TH27000XTB-TA. view full answer...
The Spare Tire for Malone LowMax Trailer, # MAL23FR is a 20" diameter x 8" wide tire that is for the LowMax Sport trailer. It works with the MPG595, MPG596XB2, MPG596XJ2, MPG596XJ4, MPG596XKB, MPG596XSRP, or MPG596XV2 models. If you have one of these models of the Malone LowMax Trailer this will work. view full answer...
Yes, I verified directly with the manufacturer that the Curt hitch does fit your 2023 Toyota Tacoma, with the correct part being the following:
- Curt Trailer Hitch Receiver # C13264
If you'll be towing and also need a 4-way wiring harness the correct part is the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56349. view full answer...
The CE Smith Multi Sport Plus Boat and Kayak Trailer # CE48870 is currently our longest boat trailer with an overall length of 13' and capable of supporting a boat up to 14' long. We will not have a boat trailer that is 16' long like you are looking for. Our longest Smooth Ride Transom Saver # 315-FXI is expandable from 31"-40". view full answer...
For your 2010 Toyota Tacoma, you can use the Tow Ready brake controller harness, part # 3040-P. You would just need to cut off the end that plugs into the brake controller and then just color match the wires from the harness to the loose wires on your brake controller. White is the ground, blue is brake output, black is 12-volt hot lead, and red is the stop light switch. You can solder them together or use butt connectors. The plug is located underneath the dashboard, to the left of the... view full answer...
All of the bull bars and grille guards offered for your 2014 Toyota Tacoma will require removal of the factory skid plate for installation. However, the skid plate may be re-installed after some necessary trimming to accommodate the mounting points for the bull bar.
Westin offers a Bull Bar, part #31-5605 in black powder-coat finish on steel, part. My contact there confirmed these will fit your 2014 Tacoma. view full answer...
Yes, we offer two options in a 2-inch Class III custom-fit hitch for your 2014 Toyota Tacoma, the Draw-Tite # 75236 and the Curt # 13323. Both share identical weight ratings and a common no-drill installation process, which is shown in the linked video. I recommend the Draw-Tite since it currently offers a lower price.
For a 4-pole wiring harness, if needed, I suggest the Tekonsha custom-fit plug-and-play harness # 118496. An install video for this is included too. view full answer...
We have bike racks that can be used at the back of a travel trailer, but the Yakima SpareRide part # Y02599 that you referenced is not one of them so I could not recommend it for your 2013 Koala travel trailer 25DS.
Check out the link I attached to see all of the racks you could use. None of them are designed to attach to a spare tire so you would need to check them all out to see which would attach to your trailer the best.
We have hitch mounted racks, bumper mounted racks, and some... view full answer...
If your 2010 Tacoma came from the factory with a 7-way trailer connector we offer replacement part # 74682 from Reese. This will plug right into the round U.S. Car connector behind the bumper. Please refer to the photo I linked for you that shows this connector.
If you need a 4-pole flat trailer connector then instead you can use harness # 118384. This too has a round U.S. Car connector. view full answer...
The Pop & Lock locking tailgate handle and power conversion kit is part # PAL8540. The kit is a confirmed fit for your 2014 Tacoma. You can see current pricing by clicking the provided product link. view full answer...
The correct Pop and Lock tailgate lock for your 2013 Toyota Tacoma with a backup camera is the part # PAL5400 which comes with a lock cylinder that will allow you to key to your truck's key.
I attached an install video for this for you to check out as well. view full answer...
We do offer a replacement driver's-side mirror for your 2012 Toyota Tacoma Regular Cab that has powered (but non-heated) mirrors. For the driver's side use part # KS70148T and for the passenger's side use part # KS70147T. These mirrors do manually fold inward but do not have turn signals. view full answer...