Expert Answers about Chrysler Sebring

• No Trailer Running Lights On Trailer But Stop/Turn Signals Works
• It sounds like you are having issues with your running lights which are actually on a separate circuit than the stop/turn lights. The first thing you will want to do is test the running light pin on the vehicle side trailer connector. If you don't get power here then you may have a blown fuse or shorted wire. If you do have power then apply power to the running light pin on the trailer side trailer connector. If the lights do not work then you most likely have a short in the running light...
  view full answer...


• Trailer Brake Lights Not Working When Connected to a 2000 Chrysler Sebring Convertible
• Your 2000 Chrysler Sebring does have a negative ground electrical system. Positive ground vehicles haven't been made in many years. It is possible that the ground connection is not in a sufficient location for the power draw. It should be attached to a clean bare metal surface; no paint, coating, or corrosion. You may need to sand down the area for the ground. Also, it would work best if grounded by itself. As for the rest of the harness verify the following connections: Yellow connects...
  view full answer...