Yes, the Replacement Breakaway Switch for Titan BrakeRite EHB part # N65113 will work just fine on your trailer with a Titan Disc Brake Actuator. These breakaway switches are universal so you can use pretty much any one in its place so long as it unitizes the same two wire design. The only thing you need to be careful of is trying to combine a different brand pin with a different brand switch. view full answer...
I checked with Saris and the Solo trunk rack part # SA102 has been confirmed as a fit for it. I attached a review video for this rack for you to check out as well.
If you plan on carrying any womens or alternative framed bikes without horizontal top tubes you may also be interested in purchasing a Kuat Bike Frame Adapter Bar # UB01 to provide a horizontal top tube on your bikes to provide an attachment point. I attached a review video for this product also. This will allow the bikes to... view full answer...
If the equalizer dimensions are pretty close to the dimensions of the E-Z Flex Equalizers # K71-655-00 that you referenced and less than 8,000 lbs axle capacity then the equalizer will fit and work well.
It would be a direct replacement. view full answer...
It appears you are going to have to have a receiver custom fabricated for your 2008 Mercedes Benz SLK 280. I was unable to find an aftermarket receiver confirmed to fit your SLK. You can use the Receiver Tube # E-912 to aid in the fabrication of a trailer hitch receiver. You will want to visit a local fabrication shop unless you are able to fabricate a receiver yourself and have it welded up. view full answer...
Yes, the SeaSucker Komodo Trunk Bike Rack # 298-BK1910-BK is confirmed to fit your 2016 Mercedes-Benz SLC AMG as the vacuum cups are compatible with a roof, trunk, or window glass. Just be sure the surface is clean before installing it.
To add some security to this trunk mount bike rack you can add a cable anchor like part # 298-BA0020 or # 298-BA0010 along with a cable lock like part # SA981.
We also have the SeaSucker Hogg # 298-BA1580 you can use to carry your front tire.
I have attached... view full answer...
There is not a trailer hitch option for your 2008 Mercedees-Benz SLK 350, so to carry a bike with this vehicle you would need a trunk-mounted bike rack. For that there is one option, the Saris Solo Bike Carrier # SA102.
This is a 1-bike rack (there are no 2- or 3-bike racks for your vehicle), and only other thing to keep in mind is that with a hanging rack like this one, if your bike has a step-through frame, you'll need to give it a horizontal mounting point with Bike Adapter Bar # 64005. view full answer...
I checked with Covercraft and for the custom fit floor mats, # CC76211725, and any mats they make, the security grommet is pre-installed if the vehicle is factory equipped with the hook or studs on the floor. So these mats will have the security grommet provided it was a stock feature on your 2001 Mercedes SLK. view full answer...
The Advantage roof mounted cargo bag you mentioned is designed to be used only on a vehicle roof that has existing side rails or crossbars.
In order to be used on a bare roof, the bag will need to have straps that are long enough to pass through the vehicle itself, through the door jambs and along the ceiling of the vehicle. We have several bags that are designed to be used in this manner, ranging in size from 4 to 18 cubic feet of storage space.
Keep in mind that the small size of... view full answer...
I do have a recommendation for you that will fit both tire sizes on your SLK. Take a look at covers # 052963762303. This set includes 2 covers, so for all 4 wheels you would need to order two sets total. They fit many tire sizes including the 225/45-17 and 245/40-17 on your Mercedes. view full answer...
Yes, if you wanted to add a second switch with the part # LC117460 to your slide out setup you can wire this switch to the same wiring as your current switch and it will function just like your current switch as it will complete the circuits in the same way.
Since the wiring is 12 gauge you can use the 10-12 gauge quick splice part # SWC501915-1 to easily tap into the same circuits view full answer...
Go To Results